Aztech HL113 E
200Mbps HomePlug AV Ethernet Adapter
V2.0
User Manual
Legal Notice
2013 © All rights reserved. Version 2.0
No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission. We reserve the right to revise this document at any time without the obligation to notify any person and/or entity. All other company or product names mentioned are used for identification purposes only and may be trademarks of their respective owners.
LIMITATION OF LIABILITY AND DAMAGES
THE PRODUCT AND THE SOFTWARES WITHIN ARE PROVIDED "AS IS," BASIS. THE MANUFACTURER AND MANUFACTURER’S RESELLERS (COLLECTIVELY REFERRED TO AS “THE SELLERS”) DISCLAIM ALL WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTIES ARISING FROM COURSE OF DEALING, COURSE OF PERFORMANCE, OR USAGE OF TRADE. IN NO EVENT WILL THE SELLERS BE LIABLE FOR DAMAGES OR LOSS, INCLUDING BUT NOT LIMITED TO DIRECT, INDIRECT, SPECIAL WILLFUL, PUNITIVE, INCIDENTAL, EXEMPLARY, OR CONSEQUENTIAL, DAMAGES, DAMAGES FOR LOSS OF BUSINESS PROFITS, OR DAMAGES FOR LOSS OF BUSINESS OF ANY CUSTOMER OR ANY THIRD PARTY ARISING OUT OF THE USE OR THE INABILITY TO USE THE PRODUCT OR THE SOFTWARES, INCLUDING BUT NOT LIMITED TO THOSE RESULTING FROM DEFECTS IN THE PRODUCT OR SOFTWARE OR DOCUMENTATION, OR LOSS OR INACCURACY OF DATA OF ANY KIND, WHETHER BASED ON CONTRACT, TORT OR ANY OTHER LEGAL THEORY, EVEN IF THE PARTIES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT OR ITS SOFTWARE IS ASSUMED BY CUSTOMER. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO THE PARTIES. IN NO EVENT WILL THE SELLERS’ TOTAL CUMULATIVE LIABILITY OF EACH AND EVERY KIND IN RELATION TO THE PRODUCT OR ITS SOFTWARE EXCEED THE AMOUNT PAID BY CUSTOMER FOR THE PRODUCT.
Page 2 of 40
User Manual
Contents |
|
About the Product..................................................................... |
5 |
How Does It Work? .................................................................................................................. |
5 |
Direct Connection ................................................................................................................... |
6 |
Package Contents....................................................................................................... |
7 |
Device Design ............................................................................................................. |
7 |
Pairing the Device................................................................................................................... |
9 |
How to Use Simple Connect ................................................................................................ |
10 |
Resetting the Private Network Name ............................................................................ |
10 |
Creating a Secured HomePlug AV Network .................................................................. |
11 |
Joining an Existing Secured HomePlug AV Network.................................................... |
17 |
Less than 30 Mbps between 30 to 80 Mbps more than 80 Mbps ............................ |
22 |
Power Saving Mode ............................................................................................................... |
22 |
Getting Started ....................................................................... |
24 |
Plan Your Network ................................................................................................... |
25 |
Local Network........................................................................................................................ |
25 |
Gaming Network.................................................................................................................... |
25 |
Entertainment Network ....................................................................................................... |
26 |
Media Network....................................................................................................................... |
27 |
Setup the HomePlug AVs.......................................................................................... |
27 |
For Twin Pack ........................................................................................................................ |
27 |
For Single Pack ...................................................................................................................... |
28 |
About HomePlug AV Utility ..................................................... |
29 |
Requirements ........................................................................................................... |
29 |
Installation ............................................................................................................... |
30 |
Opening HomePlug AV Utility................................................................................... |
31 |
The User Interface ................................................................................................... |
31 |
Home ....................................................................................................................................... |
32 |
Private Network Name ......................................................................................................... |
33 |
Local Private Network Name........................................................................................... |
34 |
Remote Private Network Name ...................................................................................... |
34 |
Simulate Simple Connect Button.................................................................................... |
35 |
Page 3 of 40
User Manual
Devices .................................................................................................................................... |
36 |
Firmware Upgrade ................................................................................................................ |
37 |
Appendix ................................................................................. |
39 |
FCC Statement .......................................................................................................... |
39 |
Page 4 of 40
User Manual
About the Product
HomePlug AV is ready to use out of the box and does not require the installation of driver software to work. It can be connected to computers, routers, gaming consoles, hubs, IPTV set-top boxes, and other Ethernet devices regardless of operating system.
How Does It Work?
HomePlug AV utilizes the existing electrical wiring in the house as a path to create a secured network of computers and Ethernet devices. With a maximum data rate of up to 200 Mbps, HomePlug AV can reliably handle high requirement applications like broadband Internet, high definition video streaming, and Voice over IP.
HomePlug AV converts digital signals to a complex analog signal that traverses along the electrical wires. When receiving the analog signal, HomePlug AV converts the analog signal back to digital. To make the signal secured, a 128-bit AES encryption is applied.
A HomePlug AV device can only communicate with other HomePlug AV devices that use the same Private Network Name. The Private Network Name can be changed manually using the HomePlug AV Utility software on a computer with a Windows operating system. When you use the software, you have to manually type the Private Network Name for the device. Another way to change the Private Network Name is to use the Simple Connect button. Simple Connect automatically creates an encrypted Private Network Name. It can also be used to reset the Private Network Name or to add a device into an existing HomePlug AV network.
Note: HomePlug AV devices from the Twin Pack are already configured to use a common Private Network Name unique for that pair and are ready to use. The HomePlug AV from a Single Pack, on the other hand, uses a random Private Network Name. You still need to change its Private Network Name to allow it to communicate with an existing HomePlug AV network.
When a HomePlug AV communicates with another device, the Powerline Activity LED 
color will give you an idea about the connection rate: Red means below 30 Mbps; Amber means 30 to 80 Mbps; and Green means more than 80 Mbps.
Page 5 of 40
User Manual
Direct Connection
For best performance, connect HomePlug AV directly to a wall outlet. Avoid connecting it to a power strip where other electrical devices are connected. Other devices create electrical noise that may affect the performance of HomePlug AV.
Page 6 of 40
User Manual
Package Contents
The package contains the following items:
∙1 HomePlug AV for Single Pack or 2 HomePlug AVs for Twin Pack
∙1 Ethernet cable for Single Pack or 2 Ethernet cables for Twin Pack
∙Resource CD that contains the HomePlug AV Utility installer and the User Manual.
∙Easy Start Guide
Device Design
Page 7 of 40
User Manual
|
|
|
|
Label |
|
Status |
|
Description/ Function |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off |
|
∙ No power. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On |
|
∙ When LED is on steady green color, and |
|
|
|
|
|
Power LED |
|
|
|
Powerline Activity and Ethernet LED is |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ON/OFF (Ethernet is connected / |
|
|
|
|
|
|
|
|
|
disconnected), HomePlugAV is on a Power |
|
|
|
|
|
|
|
|
|
Saving Status. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off |
|
Device is not connected to a HomePlug AV network. |
|
|
|
|
|
Powerline Activity |
|
|
|
|
|
|
|
|
|
|
On |
|
∙ After Simple Connect is pressed for 2-4 |
||
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
seconds, this LED will blink to confirm the |
|
|
|
|
|
|
|
|
|
button press. |
|
|
|
|
|
|
|
|
|
∙ When Simple Connect is pressed for 5-8 |
|
|
|
|
|
|
|
|
|
seconds, this LED will turn OFF and turn ON |
|
|
|
|
|
|
|
|
|
to confirm the Private Network Name reset. |
|
|
|
B |
|
|
|
|
|
∙ This LED is blinking in green color when the |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
device is part of a HomePlug AV network. |
|
|
|
|
|
|
|
|
|
∙ The LED colors represents the connection |
|
|
|
|
|
|
|
|
|
rate within the HomePlug AV network |
|
|
|
|
|
|
|
|
|
whether it is good (red), better (amber), or |
|
|
|
|
|
|
|
|
|
best (green). |
|
|
|
|
|
|
|
|
|
∙ The LED flashes to indicate network |
|
|
|
|
|
|
|
|
|
activity. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Off |
|
An Ethernet device is not connected. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
On |
|
∙ This LED is blinking when an Ethernet |
|
|
|
|
|
|
|
|
|
device is connected. |
|
|
|
C |
|
Ethernet Activity |
|
|
|
∙ When Simple Connect is pressed for 5-8 |
|
|
|
|
|
|
|
|
|
seconds, this LED will turn OFF and turn ON |
|
|
|
|
|
|
|
|
|
to confirm the Private Network Name reset. |
|
|
|
|
|
|
|
|
|
∙ The LED flashes to indicate Ethernet |
|
|
|
|
|
|
|
|
|
activity. |
|
|
|
|
|
|
|
|
|
|
|
|
|
D |
|
Ethernet Port |
|
|
|
Accepts either cross or straight Ethernet cable. |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simple Connect |
|
|
|
Press to create or join a HomePlug AV network. It |
|
|
|
|
|
Button / |
|
|
|
can also be used to reset the Private Network Name |
|
|
|
|
|
Reset Button |
|
|
|
to a random key. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
When Simple Connect is pressed for 5-8 seconds, it |
|
|
|
E |
|
|
|
|
|
will randomize the Private Network Name. |
|
|
|
|
|
|
|
|
|
Press for 10-13 seconds to reset to the factory |
|
|
|
|
|
|
|
|
|
default settings. When you reset to the factory |
|
|
|
|
|
|
|
|
|
default, all your configuration changes will be |
|
|
|
|
|
|
|
|
|
removed. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Page 8 of 40
User Manual
Pairing the Device
Your HomePlug AV devices by default are preconfigured to have a common Private Network Name.
Setting up your HomePlugAV network is as easy as 1, 2 and 3.
1.Plug in your HomePlugAV devices side by side to easily observe the LED behavior. Wait until the Power and PL-ACT LED turns ON to confirm that the connection has been established.
Location A |
Location B |
2.In Location A plug in your HomePlugAV into the wall socket then connect it to your Modem/Router’s Ethernet LAN port using an Ethernet cable.
3.In Location B plug in your HomePlugAV into the wall socket then connect it to your computer’s Ethernet Port using an Ethernet cable. Your HomePlugAV is now ready to use.
Page 9 of 40
User Manual
How to Use Simple Connect
Simple Connect provides a more convenient way of creating your HomePlug AV network without the need to open the HomePlug AV Utility software from a computer. The button has three main functions which includes:
∙Resetting the Private Network Name
∙Creating a Secured HomePlug AV Network
∙Joining an existing Secured HomePlug AV Network
Resetting the Private Network Name
Simple Connect allows you to reset the HomePlug AV’s Private Network Name to a random key. When a HomePlug AV is reset to a random key, it will not be able to communicate with any other device.
Note: Resetting the Private Network Name is different from resetting the device to its factory default settings. If you intend to reset the device to its factory default settings, press RESET on the device.
Page 10 of 40
User Manual
To reset the Private Network Name using Simple Connect:
Step 1
Press Simple Connect button for 5-8 seconds and release after press. The Power LED remains steady green. The Powerline Activity LED and Ethernet will switch OFF and ON (Ethernet is connected).
Step 2
On the second adapter, Press the Simple Connect button for 2 seconds and do it on the first adapter to pair the devices. The Powerline Activity LED will blink to indicate that the button is pressed.
Creating a Secured HomePlug AV Network
To create a HomePlug AV network, you need at least two HomePlug AV devices using random Private Network Names. When you press Simple Connect for 10-13 seconds on both devices, a common Private Network Name will be automatically generated to enable them to communicate with each other.
Note: New HomePlug AV can already communicate with each other out of the box. However, if you intend to create a new Private Network Name using Simple Connect for both devices, you need to reset their Private Network Names to a random key before proceeding.
Page 11 of 40
User Manual
To create a Secured HomePlug AV network using Simple Connect:
Step 1
Plug your HomePlug AVs side by side where you can easily observe the LED behavior.
Upon connection, the Powerline Activity and Ethernet LEDs will blink simultaneously and then the Power LED lights on steadily.
Press the Simple Connect button of the HomePlug AV X for 5-8 seconds. Powerline Activity LED will turn OFF and ON indicating that the Private Network Name has been randomize.
Page 12 of 40
Loading...