Avocent AMX5130 Quick Installation Manual
The following instructions will help you
The Power of Being There®
Quick Installation Guide
AMX™
Switching System
to connect your AMX switching system.
For more detailed information, please consult
your installer/user guide.
Initial setup
Place your AMX switch and AMX5130 user
station in the desired locations. Rack mounting
brackets for the AMX switch are included for
easy rack installation.
Connecting power
1
Power down your systems. Attach one end
of each appropriate power cord to your AMX
switch and to your AMX5130 user station. Plug
the other end of each cord into an appropriate
AC wall outlet.
2
Connecting to the LAN
Insert one end of a UTP cable attached to your
LAN into the network port on the back of the
AMX switch.
To install the AMX switch and the
AMX5130 user station
1
Connecting power
to the switch
AMIQDM
Module
1
3
Connecting the
user station
AMX5130
User Station
AMIQDM
Module
2
Connecting
to a LAN
AMX Switch
4
Connecting the
switch to servers
Connecting the AMX5130 user station
3
to the AMX switch
Insert one end of a UTP cable attached to the
user station into a numbered user port on the
AMX switch for each user in your system.
4
Connecting the AMX switch to a server
Insert one end of a UTP cable into one of the
numbered server ports on the switch, and fas-
ten the opposite end into the RJ-45 port on an
Connecting power to
the user station
AMIQDM (dual port/multimedia) module. Plug the
AMIQDM module connectors into the appropriately
labeled ports on your server for each computer to be
connected to your AMX switch.
NOTE: AMIQDM-PS2, AMIQDM-USB and
AMIQDM-VSN modules are available.
Serial
Port
To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com
Avocent, the Avocent logo, AMX and The Power of Being There are trademarks or registered trademarks of Avocent Corporation. All other marks are the property of their respective owners. ©2005 Avocent Corporation. All rights reserved. 590-487-501A
The following instructions will help you
The Power of Being There®
Quick Installation Guide
AMX™
Switching System
to connect your AMX switching system.
For more detailed information, please consult
your installer/user guide.
5
Connecting the user station to a
local CPU
Insert one end of a UTP cable into one of the
RJ-45 ports on the back of the AMX5130
user station. Fasten the opposite end into the
RJ-45 port on an AMIQDM module.
Connecting the keyboard, monitor
6
and mouse
Connect the monitor to the VGA con-
nector on the back of the AMX5130 user
station. Plug your keyboard, monitor and
mouse cables into the appropriately labeled
PS/2 or USB connectors on the back of the
AMX5130 user station.
7
Connecting the stereo speakers
and microphone
Plug your stereo speakers/headphones in the
appropriately labeled connectors on the back
of the AMX5130 user station.
NOTE: The AMX5130 user station supports
the connection of local serial devices.
Powering up
8
Power up your AMX switching system.
To install the AMX switch and the
AMX5130 user station (continued)
AMIQDM
Module
5
Connecting to a
local CPU
6
Connecting the
monitor
For additional information
For further information on AMX hardware connection,
software setup and security confi guration, please
Connecting the PS/2
keyboard and mouse
AMX5130
User Station
6
AMIQDM
Module
Serial
Port
Connecting the
stereo speakers
and microphone
refer to the installer/user guide included with the
appliance. Visit http://www.avocent.com for the
latest AMX switch updates.
AMX Switch
6
Connecting the
USB keyboard
and mouse
7
To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com
Avocent, the Avocent logo, AMX and The Power of Being There are trademarks or registered trademarks of Avocent Corporatiion. All other marks are the property of their respective owners. ©2005 Avocent Corporation. All rights reserved. 590-487-501A
Loading...