AT&T 9311 User Manual

900 MHz Cordless

Telephone 9311

Please also read

Part 1 — Important

Product Information

USER’S MANUAL

Par t 2

AT&T and the globe symbol are registered trademarks of AT&TCorp.licensed to Advanced American Telephones.

© 2000 Advanced American Telephones. All rights reserved.

Printed in China. 850001975 Issue 1AT&T 5/00

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . 3

Before You Install ...........................3

Ta ble/Desk Installation...................5

Wall Installation..............................6

TELEPHONE OPERATION . . . . . . . 8

Make or Answer a Call ...................8

End a Call.......................................8

Change Channel.............................8

Redial .............................................8

Handset Volume.............................8

Flash/Call Waiting...........................8

Page/Handset Locator....................9

Temporary Tone Dialing...............10

Handset Ringer Style....................10

Ringer Off/Battery Save ...............10

Headset Jack.................................11

Operating Range..........................11

TELEPHONE MEMORY . . . . . . . . . .12

Store Memory Numbers ...............12

Change/Replace a Stored

Memory Number......................12

Dial Memory Numbers.................12

Store a Pause in a

Memory Number......................12

Directory Label ............................12

BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Charging the Handset

Battery Pack ..............................13

Replacing the Handset

Battery Pack ..............................14

IN CASE OF DIFFICULTY . . . . . . . . .15

CONTENTS

1

Before You Install

1 Choose a location for the base near an electrical outlet and a

telephone jack.

This phone requires a modular telephone jack and a standard electrical
outlet (110v AC) not controlled by a wall switch.

2 Install the handset battery.

INSTALLATION

3

b) Align two holes in

plug with socket
pins,and snap the
plug into place.

d) Replace

cover by
sliding it up
into place.

a) Remove battery

compartment
cover by pressing
on the
indentation
and sliding
downward.

c) Place battery pack

in compartment
with the wires in
the lower left
corner,along the
bottom of the
battery pack.

INSTALLATION

4

3 Attach the belt clip to the cordless handset (optional).

To attach

To remove