Atlas Welded Desk Top Cabinets 400, 400-5, 400-7, 400-12, 400-17 Specifications

Specifications subject to change without notice

©1997 Atlas/Sound Printed in U.S.A. 01001 SL10-1099

Ten

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]

FEATURES

• Completely Assembled and All-Welded Construction

• 16-Ga. CRS Cabinet

• 5/8" - 5/8" - 1/2" EIA Standard Panel Mount Spacing

• 5/8" Offset Rails for Panel Mount

• 11-Ga. CRS Tapped Mounting. Rails

• 10-32 Pan-Head Screws for Panel Mount Supplied

• Spring-Loaded Hinge for Easy Removal of Rear Door, Except 400-5 and 400-7

• Keyed Cylinder Lock on Rear Door, Except 400-5 and 400-7

• Internal Louvers on Each Side, Except 400-5 and 400-7

• Wide Choice of Standard Paint Colors (No Additional Cost)

• Rubber Feet Provided on Models 400-5 and 400-7

• Optional Front Surface Door Available on Models 400-12 through 400-31 has
Right or Left-Hand Hinging Capability

GENERAL DESCRIPTION

Atlas/Sound 400 Series cabinets are designed for “desk top” installations accom­modating 19" (483mm) wide panel-mounted equipment. They are available in
seven popular panel space sizes (see chart on back).

These compact cabinets are constructed of welded 16-ga. CRS throughout. A
locking rear door mounted on a spring-loaded hinge for easy removal is standard
on all except 400-5 and 400-7. (These smaller models have a removable rear
panel secured with “U” clips and bolts.)

Models 400-12 through 400-31 include vents on each side for air circulation. They
are also available with optional front surface door Model Series 400-XXFD (ex:
400-12FD). [Order separately.] Door has right or left-hand hinging capability and
must be customer-installed following simple drilling template (included).

External wiring is easily strung into the cabinet through the wire entry space below
the rear door or panel. Panel mounting rails are recessed 5/8” to provide a flush
appearance.

Series 400 cabinets are shipped completely assembled. Equipment panels and
accessories are mounted with 10-32 x 3/4" (19mm) pan-head screws (supplied).
Rails are formed 11-ga. CRS with tapped mounting holes.

Standard finish is textured black epoxy unless otherwise specified; consult Paint
Chart (SL# 10-1239) for other standard colors available at no additional cost.

A wide variety of convenience and electronic accessories are available for Standard
Series cabinets.

Shown with locking front door

400 Series

WELDED DESK TOP CABINETS

381.1