Atlas Clamping Rack Shelves SH, SH15-2, SH15-3, SH15-4, SH22-2 Specifications

...

0 (0)

SH15-2

(w/o Accessories)

SH15-2

(with optional SHRSB2

and SHCK)

SH SERIES CLAMPING RACK SHELVES

FEATURES

• Designed to rack mount consumer electronics into standard Atlas Sound equipment racks

• 3 vertical heights available, 2, 3, and 4RU

• 2 depths @ 15" and 22" mounts most equipment

• Sturdy 16 gauge construction with generous ventilation slots on the bottom and sides

• Optional clamping brackets secures equipment from the top of the shelf

• Optional rear rack rail support available for heavy equipment loads

APPLICATION

The new Atlas Sound clamping rack shelf systems are designed to rack mount consumer and "prosumer" electronics into standard Atlas Sound vertical equipment racks. Offering sturdy side, rear, top and side support, the Atlas Sound SH Series rack shelves will support VCRs, surround sound receivers, RF modulators, etc. Optional adjustable clamping brackets secure equipment from the top and include "L" brackets to provide a component stop from the rear. For heavier loads needing rear support, the Atlas Sound SHRSB bracket kits securely attach the SH shelf to the rear rack rail of your rack.

MODEL DESCRIPTION SH15-2 SH15-3 SH15-4 SH22-2 SH22-3 SH22-4 SHRSB2 SHRSB3 SHRSB4 SHCK

2 SP 15" Deep Rack Shelf 3 SP 15" Deep Rack Shelf 4 SP 15" Deep Rack Shelf 2 SP 22" Deep Rack Shelf 3 SP 22" Deep Rack Shelf 4 SP 22" Deep Rack Shelf Optional 2 SP Rear Support Bracket for SH15-2 & SH22-2 Optional 3 SP Rear Support Bracket for SH15-3 & SH22-3 Optional 4 SP Rear Support Bracket for SH15-4 & SH22-4 Optional Clamping Kit for All Models

SH Series

SH22-3

(w/o Accessories)

SH22-3

(with SHRSB3)

ARCHITECH AND ENGINEER SPECIFICATIONS

Rack mount equipment tray shall be Atlas Sound SH Series Clamping rack shelf. Clamping shelf to be constructed of 16 gauge steel finished in black and in 3 standard EIA compliant heights (2, 3, and 4RU) and two depths measuring 15" and 22". Equipment ventilation slots shall located on the bottom rear portion and in each vertical side member. Wire lacing slots shall be located on the rear 90˚ vertical bend. Three optional rear support brackets shall be Atlas Sound SHRSB-2, -3, and -4. Optional equipment clamping kit shall be Atlas Sound model SHCK which shall fit all three models.

Specifications subject to change without notice

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 / FAX (800) 765-3435

TEN

AtlasSound.com

435