Atlas FEST-IH, SEST-IH, FEST-18S, SEA-18S, SEA-18SC Specifications

INFORMACAST® IP COMPLIANT LOUDSPEAKER SYSTEM

11.50

11.50

4.07

4.21

POWERED BY CISCO® POE NETWORK SWITCHES

I8S

I8S

(3/4 View)

FEATURES

• Use with Berbee InformaCast® software, Cisco® POE networks
& Cisco® IP Telephones to create extremely versatile paging and
messaging systems

• Highly efficient 10oz dual cone loudspeaker system provides 94dB
average SPL @ 1W/1M and is capable of 103dB @ 1 meter via the
rated power of the internal IP addressable amplifier

• 105˚ dispersion in the 2kHz octave band (-6dB)

• Wide frequency response of 86Hz to 8kHz (-3dB) is perfect for speech
and general messaging playback

APPLICATIONS

The perfect choice for education, military/government, and large scale
corporate applications, Berbee’s InformaCast IP Broadcasting Solution
revolutionizes communication, clock/bell and message playback
functionality. It provides the capability to simultaneously send a multicast
audio stream and text messages to any combination of Cisco IP phones,
Atlas Sound IP speakers, and PCs. With the push of a single button on
the phone or a single click from a PC, a user can send a live, recorded,
or scheduled broadcast to one or more paging groups. With InformaCast
compliant loudspeaker products from Atlas Sound, system designers
and integrators will have the ability to deploy extremely large scale and
complex paging systems over new or existing Cisco networks with the
convenience of centralized administration by IT personnel.

Extreme cost savings can also be realized from the elimination of
separate “stand alone” paging systems when InformaCast is utilized in
education applications in conjunction with the model I8S speaker baffle
system.

One

GENERAL DESCRIPTION

I8S

(Back View)

I8S

(Side View)

Specifications subject to change without notice

Model I8S from Atlas Sound consists of a factory assembled loudspeaker/
baffle with PCB amp/control board securely mounted to the rear of the
baffle via concealed weld studs. The amp/control board is capable of
producing 9 Watts RMS into the 8 Ohm loudspeaker with 9VDC minimum
power provided by Cisco IEEE 802.3AF compliant POE switches.
(local 12-18VDC PSUs may also be used instead of POE switches).
Interconnection is via a board mounted female RJ-45 connector. The
industry standard C10A loudspeaker used in the I8S is a dual cone 8”
(205mm) loudspeaker with a 10oz (260g) ceramic magnet. It includes a
curvelinear paper cone for lower harmonic distortion. The loudspeaker
is also equipped with a full 1” (25mm) diameter copper voice coil with
aluminum former for better heat dissipation. The 18 gauge construction
of the metal baffle provides security and durability in commercial
applications. The baffle is finished in neutral white electrostatic powder
coat and is packaged with all necessary mounting screws.

ENCLOSURE IS NOT INCLUDED. Available optional enclosures:

MODEL DESCRIPTION

SEA-I8S

SEST-I8S

FEST-I8S

Surface mount, angled enclosure for I8S, neutral white finish

Surface mount, straight enclosure for I8S, neutral white finish

Flush mount straight enclosure for I8S, reclaimed powder coat
finish

© 2006 Atlas Sound LP Printed in U.S.A. 01106 ATS002380 RevB 11/06 SL1-2086

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone] / FAX [phone]

AtlasSound.com

49