Asus RS160-E5 Configuration Guide

RS160-E5
Conguration Guide
E4630
Third Edition V3
March 2009
Copyright © 2009 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
limited to the implied warranties or conditions of merchantability or tness for a particular purpose. In no event shall ASUS, its directors, ofcers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of prots, loss of business, loss of use or data,
interruption of business and the like), even if ASUS has been advised of the possibility of such damages arising from any defect or error in this manual or product.
Specications and information contained in this manual ae furnished for informational use only, and are
subject to change at any time without notice, and should not be construed as a commitment by ASUS. ASUS assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual, including the products and software described in it.
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
II

Contents

Contents ...................................................................................................... III
Revision history .......................................................................................... III
Safety information ...................................................................................... IV
Chapter 1: Product introduction
1.1 Key features .................................................................................. 1-2
1.2 System overview ..........................................................................
1.3 Front panel features .....................................................................
1.4 Rear panel features ......................................................................
1.5 Systemspecications .................................................................
Chapter 2: Components
2.1 Upgrading CPU and CPU heatsink ............................................. 2-2
2.2 Upgrading system memory .........................................................
2.3 Upgrading hard disk drives .........................................................
2.4 Installing ASUS PIKE 1064E/1078 RAID module .......................
2.5 Installing ASUS RAID card ..........................................................
2.6 Installing ASUS Server Management Board ..............................
2.7 OS support list .............................................................................
1-3
1-4
1-4
1-5
2-3
2-4
2-5
2-6
2-7
2-9

Revision history

Revision Revision history Date
V1 First release of RS160-E5 conguration guide August 2008
1. Add ASMB3-iKVM
V2
V3
2. Modify ASMB3-SOL PLUS to ASMB3-SOL PLUS (V3)
3. Add ASUS RAID card (8708)
4. Update PIKE 1064E order P/N
Update PIKE 1064E order P/N and description March 2009
October 2008
III

Safety information

Electrical Safety
Before installing or removing signal cables, ensure that the power cables for the system unit and all attached devices are unplugged.
To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
When adding or removing any additional devices to or from the system, contact
a qualied service technician or your dealer. Ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you service.
If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your dealer.
Operation Safety
Servicing of this product or units is to be performed by trained service personnel only.
Before operating the server, carefully read all the manuals included with the server package.
Before using the server, make sure all cables are correctly connected and the power cables are not damaged. If any damage is detected, contact your dealer as soon as possible.
To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
Avoid dust, humidity, and temperature extremes. Place the server on a stable surface.
This product is equipped with a three-wire power cable and plug for the user’s safety. Use the power cable with a properly grounded electrical outlet to avoid electrical shock.
Lithium-Ion Battery Warning
CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
CD-ROM Drive Safety Warning
CLASS 1 LASER PRODUCT
Heavy System
CAUTION! This server system is heavy. Ask for assistance when moving or carrying the system.
IV
Chapter 1
This chapter describes the key features of RS160-E5. It includes the product
overview and general specications.
Product introduction
1-

1.1 Key features

The ASUS RS160-E5 server wins the Best Choice of COMPUTEX
TAIPEI 2008 Award among the Green IT products.
ASUS PIKE Technology - Flexible Storage Interface Options
Optional PIKE 1064E SAS and PIKE 1078 SAS RAID are Supported
Flexible storage interface choice with high compatibility
No I/O expansion slot is sacriced for SAS/SAS RAID support
ASUS Quiet-System Technology – Lowest as 36 dBA
Provides excellent acoustic control in 1U dual-processor server system
Intelligent fan speed control for optimal thermal solution
Facilitate customers with quiet working environment
Excellent Performance/Watt
Equipped High power efciency power supply for reducing the power loss
Support DDR2 memory modules for power-saving
Save energy cost especially for IDC, HPC and Enterprise with 24x7 non-stop
server service
Chapter 1: Product introduction1-2
Loading...
+ 14 hidden pages