IMPORTANT SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
The mains plug is the main disconnect device. It shall remain readily
accessible and operable.
The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
WARNING: Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
See label on bottom of unit for additional markings.
During Transportation to the Subscriber Home
Transport the cable terminal in its shipping box or an equally padded
container.
Do not expose the terminal to rain or moisture.
During Installation
Do not place the terminal in an enclosed area where the cooling vents are
blocked or impede the flow of air through the ventilation openings.
Install the terminal so that its position does not interfere with its proper
ventilation. For example, do not place the terminal on a bed, sofa, rug, or
similar surface that could block the ventilation openings.
Install the terminal so that there is a minimum of two inches of space
between surrounding surfaces and the top, left, and right sides of the
terminal to ensure proper ventilation.
Install the terminal away from heat sources such as radiators, heat registers
and stoves. Installation of the terminal near consumer electronics devices,
such as stereo receiver/amplifiers and televisions, is permitted as long as
the air surrounding the terminal does not exceed 40º C (104º F).
Place the terminal on a flat surface not prone to vibration or impact.
Do not place the terminal on top of another electronic device.
Do not install the terminal in an area where condensation occurs.
To prevent the temporary loss of guide data and cause a temporarily non-
responding terminal, do not plug the AC power cord into a switched power
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
To avoid shock and vibration damage to the internal hard drive, do not
move the terminal while it is plugged in.
To allow the hard drive to spin down and park its heads, wait at least 10
seconds after disconnecting power before moving the terminal.
Install the terminal so that there is a minimum of 3 inches of space between
surrounding surfaces and the back of the terminal to ensure proper
ventilation.
FCC Certification
This product contains a radio transmitter and accordingly has been certified
as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC
RF exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles)
must be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC DECLARATION OF CONFORMITY
ARRIS International, PLC., 3871 Lakefield Drive, Suwanee, GA 30024, 1-866-
36-ARRIS, declares that this Class B digital device complies with 47 CFR Parts
2 and 15 of the FCC rules.
INDUSTRY CANADA (IC)
This Class B digital device complies with CAN ICES-3 B/NMB-3 B.
Cet appareil numérique de la classe B est conforme à la norme CAN ICES-3
B/NMB-3 B.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence
standard RSS (s). Son fonctionnement est soumis aux deux conditions
suivantes: (1) cet appareil ne doit pas provoquer d'interférences et (2) cet
appareil doit accepter toute interférence, y compris celles pouvant causer un
mauvais fonctionnement de l'appareil.
IP900 FVIN: 20.7.4.silver.2017.06.10-0437
RADIATION EXPOSURE STATEMENT
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformité de rf.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé
et actionné avec une distance minimum de 20 centimètres entre le radiateur
et votre corps.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
The exclamation point, within an equilateral triangle, is intended to
alert the user to the presence of important installation, servicing,
and operating instructions in the documents accompanying the
equipment.
This symbol indicates that dangerous voltage levels are present
within the equipment. These voltages are not insulated and may be
of sufficient strength to cause serious bodily injury when touched.
The symbol may also appear on schematics.
1
CARING FOR THE ENVIRONMENT BY RECYCLING
When you see this symbol on an ARRIS product, do not dispose of
the product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for
information about practices established for your region. If collection
systems are not available, call ARRIS Customer Service for
assistance.
SOFTWARE LICENSE, SAFETY, AND REGULATORY INFORMATION
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY
BEFORE YOU USE ANY SOFTWARE, FIRMWARE AND RELATED
DOCUMENTATION (“SOFTWARE”) PROVIDED WITH THE ARRIS DIGITAL CABLE
RECEIVER OR HOME THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS
LICENSE AS A “RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF
THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS
OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY
BINDING AGREEMENT BETWEEN YOU AND ARRIS. THE TERMS OF THIS
LICENSE APPLY TO YOU AND TO ANY SUBSEQUENT USER OF THIS
SOFTWARE.
IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THIS LICENSE (I) DO NOT
USE THE SOFTWARE AND (II) RETURN THE RECEIVER AND THE SOFTWARE
(COLLECTIVELY, “PRODUCT”), INCLUDING ALL COMPONENTS,
DOCUMENTATION AND ANY OTHER MATERIALS PROVIDED WITH THE
PRODUCT, TO YOUR POINT OF PURCHASE OR SERVICE PROVIDER, AS THE
CASE MAY BE, FOR A FULL REFUND.
The Software includes associated media, any printed materials, and any
“on-line” or electronic documentation. Software provided by third parties
may be subject to separate end-user license agreements from the
manufacturers of such Software. The Software is never sold. ARRIS licenses
the Software to the original customer and to any subsequent licensee for
personal use only on the terms of this License. ARRIS and its third party
licensors retain the ownership of the Software.
You may:
USE the Software only in connection with the operation of the Product.
TRANSFER the Software (including all component parts and printed
materials) permanently to another person, but only if the person agrees to
accept all of the terms of this License. If you transfer the Software, you must
at the same time transfer the Product and all copies of the Software (if
applicable) to the same person or destroy any copies not transferred.
TERMINATE this License by destroying the original and all copies of the
Software (if applicable) in whatever form.
You may not:
(1) Loan, distribute, rent, lease, give, sublicense or otherwise transfer the
Software, in whole or in part, to any other person, except as permitted
under the TRANSFER paragraph above. (2) Copy or translate the User Guide
included with the Software, other than for personal use. (3) Copy, alter,
translate, decompile, disassemble or reverse engineer the Software,
including but not limited to, modifying the Software to make it operate on
non-compatible hardware. (4) Remove, alter or cause not to be displayed,
any copyright notices or startup message contained in the Software
programs or documentation. (5) Export the Software or the Product
components in violation of any United States export laws.
The Product is not designed or intended for use in on-line control of
aircraft, air traffic, aircraft navigation or aircraft communications; or in
design, construction, operation or maintenance of any nuclear facility.
ARRIS AND ITS THIRD PARTY LICENSORS DISCLAIM ANY EXPRESS OR
IMPLIED WARRANTY OF FITNESS FOR SUCH USES. YOU REPRESENT AND
WARRANT THAT YOU SHALL NOT USE THE PRODUCT FOR SUCH PURPOSES.
Title to this Software, including the ownership of all copyrights, mask work
rights, patents, trademarks and all other intellectual property rights
subsisting in the foregoing, and all adaptations to and modifications of the
foregoing shall at all times remain with ARRIS and its third party licensors.
ARRIS retains all rights not expressly licensed under this License. The
Software, including any images, graphics, photographs, animation, video,
INSTRUCCIONES DE SEGURIDAD IMPORTANTES
Lea estas instrucciones.
Guarde estas instrucciones.
Considere todas las advertencias.
Siga todas las instrucciones.
audio, music and text incorporated therein is owned by ARRIS or its third
party licensors and is protected by United States copyright laws and
international treaty provisions. Except as otherwise expressly provided in
this License, the copying, reproduction, distribution or preparation of
derivative works of the Software, any portion of the Product or the
documentation is strictly prohibited by such laws and treaty provisions.
Nothing in this License constitutes a waiver of the ARRIS rights under
United States copyright law.
This License and your rights regarding any matter it addresses are
governed by the laws of the State of Georgia, without reference to conflict
of laws principles. THIS LICENSE SHALL TERMINATE AUTOMATICALLY if you
fail to comply with the terms of this License.
ARRIS is not responsible for any third party software that is provided as a
bundled application, or otherwise, with the Software or that is downloaded
to, or otherwise installed on, the Product.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and set-top.
Connect the equipment into an outlet on a circuit different from that to
which the set-top is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by ARRIS for
compliance could void the user’s authority to operate the equipment.
U.S. GOVERNMENT RESTRICTED RIGHTS
The Product and documentation is provided with RESTRICTED RIGHTS. The
use, duplication or disclosure by the Government is subject to restrictions
as set forth in subdivision (c)(1)(ii) of The Rights in Technical Data and
Computer Software clause at 52.227-7013. The contractor/manufacturer is
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024.
Open Source Software Information
For instructions on how to obtain a copy of any source code being made
publicly available by ARRIS related to software used in this ARRIS product
you may send your request in writing to:
ARRIS Enterprises, LLC.
Software Pedigree Operations
2450 Walsh Avenue
Santa Clara, CA 95051 USA
The ARRIS website opensource.arrisi.com also contains information
regarding use of open source. ARRIS has created the opensource.arrisi.com
to serve as a portal for interaction with the software community-at-large.
This document contains additional information regarding licenses,
acknowledgments and required copyright notices for open source
packages used in this ARRIS product.
© 2017 ARRIS Enterprises, LLC. All rights reserved.
No part of this publication may be reproduced in any form or by any means or used to
make any derivative work (such as translation, transformation, or adaptation) without
written permission from ARRIS Enterprises, Inc. (“ARRIS”). ARRIS reserves the right to
revise this publication and to make changes in content from time to time without
obligation on the part of ARRIS to provide notification of such revision or change.
ARRIS and the ARRIS logo are all trademarks of ARRIS Enterprises, Inc. Other trademarks
and trade names may be used in this document to refer to either the entities claiming the
marks and the names of their products. ARRIS disclaims proprietary interest in the marks
and names of others. This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Rovi, and is intended for home and other
limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or
disassembly is prohibited.
No use este aparato cerca del agua.
Limpie sólo con un paño seco.
No bloquee las aberturas de ventilación. Instale siguiendo las instrucciones
del fabricante.
2