Page 1
Rack Power Distribution Unit—AP7530,
AP7540
General Information
Description
This booklet provides information on installing and operating the Rack
Power Distribution Units (PDUs) AP7530 and AP7540.
AP7530 AP7540
24 NEMA 5-20 outlets 20 IEC 320 C13 outlets,
NEMA L5-20 plug NEMA L6-20 plug
4 IEC 320 C19 outlets
Page 2
General Information
Inventory
Quantity Item
2 Cord retention tray (with 8 flat-head screws and
24 wire ties)
2 Mounting brackets (with 4 flat-head screws)
1 Warranty registration card
Receiving inspection
Please recycle
Inspect the package and contents for shipping damage, and make sure
that all parts were sent. Report any damage immediately to the shipping
agent, and report missing contents, damage, or other problems
immediately to APC or your APC reseller.
The shipping materials are recyclable. Please save them for
later use, or dispose of them appropriately.
2 Rack Power Distribution Unit — AP7530, AP7540
Page 3
How to Install the Rack PDU
Attach the cord retention trays
Attach cords to the tray
Attach the cord retention trays to the Rack PDU, using four flat-head
screws (provided) per tray.
Attach a cord to the tray by looping the cord and securing it to the tray,
using a wire tie (provided).
Note
Each cord must be secured to the tray so that you can
unplug it from the Rack PDU without removing the wire
tie.
Rack Power Distribution Unit — AP7530, AP7540 3
Page 4
How to Install the Rack PDU
Mounting options
Toolless mounting
You can install the Rack PDU in one of two ways: using toolless
mounting pegs (provided) or the mounting brackets (provided).
• To install the Rack PDU using the toolless mounting method,
install it in the rear of the NetShelter VX Enclosure, in the cable
channel directly behind the rear vertical mounting rails.
• To install the Rack PDU using the mounting brackets, install it on a
vertical mounting rail on your rack or enclosure.
1. Slide the mounting pegs into the holes located in the channel in the
rear panel of the enclosure.
2. Snap the Rack PDU into place by pushing it downward until it
locks into position.
You can mount two Rack PDUs on one side of the enclosure
by using the toolless mounting method.
Note
4 Rack Power Distribution Unit — AP7530, AP7540
Page 5
How to Install the Rack PDU
Bracket-mounting
To mount the Rack Rack PDU vertically in a NetShelter® or any
standard EIA-310 rack or enclosure:
1. Attach the vertical-mounting brackets to the Rack PDU.
Rack Power Distribution Unit — AP7530, AP7540 5
Page 6
How to Install the Rack PDU
2. Install the Rack PDU on a vertical mounting rail in your rack or
enclosure.
6 Rack Power Distribution Unit — AP7530, AP7540
Page 7
Specifications
Electrical
AP7530 AP7540
Nominal input voltage 120 V 208V
Acceptable input voltage ± 10% Nominal input voltage
Input frequency 47– 63 Hz
Cord length 10 ft
Input connectors NEMA L5-20 plug NEMA L6-20 plug
Output connectors
Maximum total current draw 16A
24 NEMA 5-20 outlets 20 IEC 320 C13;
Physical
Size (H × W × D)
Weight 10 lb (4.54 kg)
Shipping weight 17 lb (7.71 kg)
63.75 ×2.19 × 1.73 in
(161.92 ×5.56×4.39 cm)
Environmental
Elevation (above MSL)
Operating
Storage
Temperature
Operating
Storage
Humidity
Operating
Storage
0–15 000 ft (0–4500 m)
0–50 000 ft (0– 15 000 m)
–5 to 45° C (23 to 115° F)
–25 to 65° C (–13 to 149° F)
5–95%
5–95%
RH, Non-condensing
RH, Non-condensing
4 IEC 320 C19 outlets
Compliance
Safety verification UL, cUL 60950
Rack Power Distribution Unit — AP7530, AP7540 7
Page 8
Warranty and Service
Limited warranty
Warranty limitations
APC warrants the Rack PDU to be free from defects in materials and
workmanship for a period of two years from the date of purchase. Its
obligation under this warranty is limited to repairing or replacing, at its
own sole option, any such defective products. This warranty does not
apply to equipment that has been damaged by accident, negligence, or
misapplication or has been altered or modified in any way. This
warranty applies only to the original purchaser.
Except as provided herein, APC makes no warranties, express or
implied, including warranties of merchantability and fitness for a
particular purpose. Some jurisdictions do not permit limitation or
exclusion of implied warranties; therefore, the aforesaid limitation(s) or
exclusion(s) may not apply to the purchaser.
Except as provided above, in no event will APC be liable for direct,
indirect, special, incidental, or consequential damages arising out of
the use of this product, even if advised of the possibility of such
damage.
Specifically, APC is not liable for any costs, such as lost profits or
revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
This warranty gives you specific legal rights and you may also have
other rights, which vary according to jurisdiction.
Obtaining service
To obtain support for problems with your Rack PDU:
0
1. Note the serial number and date of purchase. The serial number is
located on the bottom of the Rack PDU.
2. Contact Customer Support at a phone number located on the back
cover. A technician will try to help you solve the problem by
phone.
3. If you must return the product, the technician will give you a return
material authorization (RMA) number. If the warranty expired, you
will be charged for repair or replacement.
4. Pack the unit carefully. The warranty does not cover damage
sustained in transit. Enclose a letter with your name, address, RMA
number and daytime phone number; a copy of the sales receipt;
and a check as payment, if applicable.
5. Mark the RMA number clearly on the outside of the shipping
carton.
6. Ship by insured, prepaid carrier to the address provided by the
Customer Support technician.
8 Rack Power Distribution Unit — AP7530, AP7540
Page 9
Life-Support Policy
General policy
Examples of life-support devices
American Power Conversion (APC) does not recommend the use of any
of its products in the following situations:
• In life-support applications where failure or malfunction of the
APC product can be reasonably expected to cause failure of the
life-support device or to affect significantly its safety or
effectiveness.
• In direct patient care.
APC will not knowingly sell its products for use in such applications
unless it receives in writing assurances satisfactory to APC that (a) the
risks of injury or damage have been minimized, (b) the customer
assumes all such risks, and (c) the liability of American Power
Conversion is adequately protected under the circumstances.
The term life-support device includes but is not limited to neonatal
oxygen analyzers, nerve stimulators (whether used for anesthesia, pain
relief, or other purposes), autotransfusion devices, blood pumps,
defibrillators, arrhythmia detectors and alarms, pacemakers,
hemodialysis systems, peritoneal dialysis systems, neonatal ventilator
incubators, ventilators (for adults and infants), anesthesia ventilators,
infusion pumps, and any other devices designated as “critical” by the
U.S. FDA.
Hospital-grade wiring devices and leakage current protection may be
ordered as options on many APC UPS systems. APC does not claim that
units with these modifications are certified or listed as hospital-grade by
APC or any other organization. Therefore these units do not meet the
requirements for use in direct patient care.
Rack Power Distribution Unit — AP7530, AP7540 9
Page 10
APC Worldwide Customer Support
Customer support for this or any other APC product is available at no charge in any of the following ways:
• Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer support
requests.
– www.apc.com (Corporate Headquarters)
Connect to localized APC Web sites for specific countries, each of which provides customer support
information.
– www.apc.com/support/
Global support searching APC Knowledge Base and using e-support.
• Contact an APC Customer Support center by telephone or e-mail.
– Regional centers:
Direct InfraStruXure Customer Support
Line
APC headquarters U.S., Canada (1)(800)800-4272 (toll free)
Latin America (1)(401)789-5735 (USA)
Europe, Middle East, Africa
Japan (0) 35434-2021
Australia, New Zealand, South Pacific
area
– Local, country-specific centers: go to www.apc.com/support/contact for contact information.
Contact the
how to obtain local customer support.
APC representative or other distributor from whom you purchased your APC product for information on
Entire contents copyright © 2004 American Power Conversion. All rights reserved.
Reproduction in whole or in part without permission is prohibited. APC, the APC logo,
InfraStruXure, and NetShelter are trademarks of American Power Conversion Corporation and
may be registered in some jurisdictions. All other trademarks, product names, and corporate
names are the property of their respective owners and are used for informational purposes only.
(1)(877)537-0607 (toll free)
(353)(91)702000 (Ireland)
(61) (2) 9955 9366 (Australia)
990-1417A 03/2004
*990-1417A*
Loading...