Network MasterTM Series MT1000A Network Master Pro
MU100020A/21A/22A/23A OTDR Module
MU100020A/21A/22A/23A
End
Installing Complex Mobile Networks
The worldwide spread of mobile devices, such as smartphones and tablets using SNS, video streaming, etc., is causing an
explosive increase in data traffic volumes. Mobile network base stations have various configurations; as well as shifting
towards using smaller remote radio head (RRH) installations, optical fiber fault-finding and transport quality tests are
required as the network environment evolves.
Installing the Transport Module MU100010A (10G Multirate)/MU100011A (100G Multirate) and OTDR Module MU100020A/
MU100021A/MU100022A/MU100023A in the Network Master Pro MT1000A supports all-in-one optical-fiber fault finding and
transport quality tests.
Using the MU100020A/MU100021A/MU100022A/MU100023A, scratched or dirty connectors at fiber cable connections can be
detected as fault locations from the excessive optical reflections to support fault finding and troubleshooting of Mobile
optical networks. Additionally, work efficiency is greatly improved using the Fiber Visualizer function supporting Easy-to-Use/
Easy-to-Report testing.
Network Master Pro MT1000A SeriesKey Applications
All in
One
Easy
All-in-One Optical/Transport Tester
Install OTDR Module and 10G/100G
Multirate Module in one main frame
Easy-to-Use Intuitive GUI Menus
to use
● Compact Lightweight Design for Onsite Testing
● Modular Design for Maximized Investment Efficiency
Mobile Network I&M
Mobile
Backhaul
Fronthaul
Easy
to use
Core and Metro Network Long Range I&M
● Measures Trunk Fibers of 100 km or more and PON Networks with up to 1 × 128 Splitters
● Supports three SM fiber (1310 nm/1550 nm) models (Standard, Enhanced, High-Performance)
● Supporting Construction using Multi-core Fiber Cables
● Supports other Mobile network applications
Mobile Fronthaul and Backhaul Optical Loss and Reflection
Attenuation Measurements
Mobile
・ Supports SM fiber (1310/1550/1625 nm, 1650 nm), MM fiber (850 nm/1300 nm) models
・ All-in-one OTDR, light source, optical power meter, visible light source (option)
・ High-accuracy event detection
・ CPRI/OBSAI measurement with simultaneously installed Multirate Module
MU100010A/MU100011A
Easy-to-Use, Easy-to-Report
・ Graphical summary and Pass/Fail evaluation display using Fiber Visualizer function
・ OTDR simple test mode operation using touch panel
・ One-touch button PDF report output
3
Network Master Pro MT1000A, OTDR Module MU100020A/21A/22A/23A
All-in-One
Network I&M is supported by installing the MU100020A/MU100021A/
MU100022A/MU100023A and MU100010A/MU100011A in the MT1000A.
The OTDR Module lineup includes the MU100021A for OTDR
measurements of both SM and MM fibers in high demand by the
Mobile network I&M, plus the MU100020A/MU100022A/MU100023A for
OTDR measurements of SM fiber used by PON networks and long- range
measurements in Core/Metro networks.
With 10G/100G Multirate Module and OTDR Module
Easy-to-Use GUI
The MT1000A GUI design simulates onsite operations to help increase
evaluation efficiency at network installation and to speed-up fault
troubleshooting and isolation. Additionally, the intuitive user interface
operations also help cut training time.
Portable
All test functions required for network verification are built into the
compact MT1000A cabinet for easy, all-in-one onsite support of most
communications standards; the standard soft carry bag accessory is also
ideal for carrying the MT1000A onsite.
Long Battery Life
Since AC power is not commonly available onsite, the MT1000A can run
for up to 6 hours (with OTDR Module) on just one battery charge. And
the optional car 12 Vdc adapter offers in-vehicle charging, helping
facilitate uninterrupted work when moving between sites.
All-in-One Functions Required by Physical Layer I&M Tests
The MU100020A/MU100021A/MU100022A/MU100023A built-in light
source and power meter functions can be used for optical loss tests in
addition to OTDR tests. An optional (Option 002) visible light source
can be installed as well.
Moreover, the presence of scratches and dirt on the fiber end face can
be checked using the Video Inspection Probe (VIP).
Easy-to-Read and Easy-to-Use 9-inch High-Resolution Touch
Screen
The large 9-inch high-resolution, full-color, touch screen is easy to use
and displays easy-to-read measurement results, helping improve onsite
work efficiency.
4
: Separately sold Video Inspection Probe (External G0382A/G0306B)
*
G0382AG0306B
Network Master Pro MT1000A, OTDR Module MU100020A/21A/22A/23A
Network Master Pro MT1000A, OTDR Module MU100020A/21A/22A/23A
OTDR Module Applications
Generally, depending on the optical fiber measurement environment, OTDR measurements require multiple settings such as distance range, pulse
width, measurement time, etc., making work difficult for technicians who do not generally use an OTDR. When performing Pass/Fail evaluation of an
optical network for a report, a simple intuitive GUI is key to improving work efficiency.
The MU100020A/MU100021A/MU100022A/MU100023A emphasizes easy-to-understand operability using four application measurement modes:
Standard OTDR Measurement, FTTA Measurement, Construction Mode and OLTS Measurement.
Standard OTDR Measurements
Graphical Display Based on Three-Window Operation: SETUP/TEST/RESULT
This sets the measurement wavelength.
Other conditions, such as distance range, measurement time, etc., are
measured at the Auto setting conditions.
One-Button Screen Switch
This sets the detection conditions for optical fiber connectors and
splices as well as the Pass/Fail evaluation threshold values, and starts
measurement.
This displays the Pass/Fail evaluation results for each event graphically
at the Fiber Visualizer screen.
Additionally, waveform analysis is supported by switching to the Trace
screen.
The measured data are output as a PDF report by an easy one-button
operation.
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.