Quick Start Guide
VectorStar™ ME7838D4/G4
Multiport Broadband/Banded
Millimeter-Wave System
High Performance Modular Broadband/Banded Millimeter-Wave Vector Network Analyzer (VNA) Multiport Measurement System
ME7838D4, 70 kHz to 145 (150) GHz
ME7838G4, 70 kHz to 220 (226) GHz
Anritsu Company |
Part Number: 10410-00770 |
490 Jarvis Drive |
Revision: C |
Morgan Hill, CA 95037-2809 |
Published: February 2021 |
USA |
Copyright 2021 Anritsu Company, USA. All Rights Reserved. |
http://www.anritsu.com |
|
High Performance Modular Broadband/Banded Millimeter-Wave Vector Network Analyzer (VNA) Measurement System
This guide provides quick setup instructions for the ME7838D4 and ME7838G4 Multiport Broadband/Banded mm-Wave VNA System assemblies. For additional safety and compliance information, and for more details about the assembly, configuration, setup, and initial testing of the equipment, refer to the VectorStar™ ME7838x4 Series Multiport Broadband Vector Network Analyzers Installation Guide – 10410-00734.
This and all other documentation that supports the ME7838D4 and ME7838G4 is available on the VectorStar product web page:
http://www.anritsu.com/test-measurement/products/me7838a4
On this web page, you can select various tabs for more information about your instrument. Included is a Library tab which contains links to all the latest technical documentation related to this instrument.
1.ME7838D4 and ME7838G4 Main Components
The ME7838D4 Multiport Broadband system consists of the following components:
•MS4647A or MS4647B VNA with Option 007 (Receiver Offset) and Option 08x (Modular Broadband Connection Capability)
•MN4697C Multiport Test Set
•3736B Broadband Test Set
•3739C Broadband Test Set
•Four MA25300A Millimeter-Wave Modules
•Front and rear panel cables
The ME7838G4 Multiport Broadband system consists of the following components:
•MS4647B VNA with Option 007 (Receiver Offset) and Option 08x (Modular Broadband Connection Capability)
•MN4697C Multiport Test Set
•3736B Broadband Test Set
•3739C Broadband Test Set
•Four MA25400A Millimeter-Wave Modules
•Front and rear panel cables
The ME7838D4 Multiport Banded system consists of the following components:
•MS464xA/B VNA with Option 08x
•MN4694C Multiport Test Set
•3736B Broadband Test Set
•3739C Broadband Test Set
•Four 3744A-EE, 3744A-EW, or four OML/VDI Millimeter-Wave Modules
•Front and rear panel cables
QSG-2 |
PN: 10410-00770 Rev. C |
VectorStar ME7838D4/G4 QSG |
1. ME7838D4 and ME7838G4 Main Components
The ME7838G4 Multiport Banded system consists of the following components:
•MS464xB VNA with Option 08x
•MN4694C Multiport Test Set
•3736B Broadband Test Set
•3739C Broadband Test Set
•Four 3744A-EE, 3744A-EW, or four OML/VDI Millimeter-Wave Modules
|
A MS464xA/B VNA unit is heavy. To avoid personal injury, it must be lifted and |
|
maneuvered by at least two people during installation. |
Caution |
If mounting on a workbench surface, first position the 3739C Broadband Test Set |
|
with access to its front and rear panels. Stack the remaining test sets on top of one |
|
another, then finally the VNA. |
|
If mounting into rack or console, make sure the Test Sets have been installed, and |
|
that the rack/console is carefully positioned on a flat and level surface. If equipped, |
|
make sure any casters are locked. Use two people to lift the VNA unit and two to |
|
guide it into its shelf rails. |
|
The test loops on the front and rear panels of the VNA are delicate. Be careful not to |
|
bump or bend the test loops. |
|
|
VectorStar ME7838D4/G4 QSG |
PN: 10410-00770 Rev. C |
QSG-3 |
2.Rear Panel Connections Between System Components (MS464xA VNA)
In this section, connect the cables between the VNA and the Test Sets as shown in Figure 1 and Table 1.
|
7 |
|
7 |
7 |
1 |
2 |
|
|
7 |
|
|||
|
|
|
|
|
|
19 |
|
|
|
|
|
|
MS464xA |
|
|
|
|
|
|
VNA |
|
|
|
|
|
|
8 |
|
|
|
|
|
|
9 |
|
12 |
14 |
|
16 |
18 |
|
11 |
13 |
|
15 |
17 |
|
|
|
|
|
|
20 |
|
|
|
|
MN469xC |
|
|
|
|
Test Set |
|
|
|
|
9 |
8 |
7 |
7 |
7 |
7 |
2 |
|
|
|
21 |
|
|
|
|
3736B |
1 |
|
|
|
Test Set |
|
|
|
|
|
4 |
6 |
|
|
|
3 |
|
|
|
|
6 |
6 |
|
|
|
5 |
|
|
|
|
|
IF Outputs |
6 |
|
CAUTION |
a1 |
b |
a2 |
b2 |
Do not operate with |
|
|
power cord ungrounded. |
|
|
||||
Ext |
|
|
|
|
22 |
|
Alc |
|
|
|
|
|
|
Out |
|
External I/O |
WARNING |
85-240 VAC |
3739C |
|
|
|
able parts inside. |
||||
|
|
|
No operator service- |
~ LINE INPUT |
|
|
|
|
|
47-63 Hz |
|
|
|
|
|
|
Refer servicing to |
150 VA Max |
|
Test Set |
Ext |
|
|
qualified personnel. |
Fuse 250V 2A T |
|
|
|
|
Module Interface |
|
|
||
Analog |
|
|
Cable Length |
|
|
|
In |
|
|
|
CAUTION |
|
|
For continued fire protection Standard Extended replace only with specified
type and rated fuse.
Figure 1 ME7838D4 – Rear Panel Cable Connections (MS464xA VNA)
QSG-4 |
PN: 10410-00770 Rev. C |
VectorStar ME7838D4/G4 QSG |
2. Rear Panel Connections Between System Components (MS464xA VNA)
Table 1. |
ME7838D4 Multiport Rear Panel Cable Connections (1 of 2) |
|
|||
|
|
|
|
|
|
Index |
|
Part Number |
Cable Description |
Connection From |
Connection To |
|
|
|
|
|
|
1 |
|
3-806-225 |
BNC (male-male), 24 in |
MS464xA port labeled: |
3736B port labeled: |
|
Ext Analog Out |
EXT ANALOG IN |
|||
2 |
|
3-806-225 |
BNC (male-male), 24 in |
MS464xA port labeled: |
3736B port labeled: |
|
Ext ALC |
EXT ALC OUT |
|||
|
|
|
|
3736B port labeled: |
3739C port labeled: |
3 |
|
3-806-225 |
BNC (male-male), 24 in |
(To Test Set) EXT ANALOG |
|
|
EXT ANALOG IN |
||||
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
3-806-225 |
BNC (male-male), 24 in |
3736B port labeled: |
3739C port labeled: |
|
(To Test Set) EXT ALC IN |
EXT ALC OUT |
|||
5 |
|
|
DB-25 |
3736B port labeled: |
3739C port labeled: |
|
|
TO TEST SET EXTERNAL I/O |
EXTERNAL I/O |
||
|
|
|
|
||
|
|
a |
SMA male-male flexible: |
3736B ports labeled: |
3739C ports labeled: |
|
|
3-73598-1 |
3-72243-1 |
(IF INPUTS) |
(IF OUTPUTS) |
|
|
(5 cable |
|||
6 |
|
bundle) |
3-72243-2 |
a1 |
a1 |
|
|
||||
|
|
|
3-72243-3 |
b1 |
b1 |
|
|
|
a2 |
a2 |
|
|
|
|
3-72243-4 |
||
|
|
|
b2 |
b2 |
|
|
|
|
|
|
|
|
|
|
SMA male-male flexible: |
MS464xA ports labeled: |
3736B ports labeled: |
|
|
|
3-72243-21 |
(Inputs/Outputs) |
(IF OUTPUTS) |
7 |
|
3-80734a |
3-72243-22 |
a1 IF |
a1 IF |
|
|
(5 cable |
3-72243-23 |
b1 IF |
b1 IF |
|
|
a2 IF |
a2 IF |
||
|
|
bundle) |
3-72243-24 |
||
|
|
b2 IF |
b2 IF |
||
|
|
|
|||
|
|
|
|
|
|
8 |
|
|
DB-25 |
MS464xA port labeled: |
3736B port labeled: |
|
|
External I/O |
TO VNA EXTERNAL I/O |
||
|
|
|
|
||
|
|
|
|
|
|
9 |
|
2100-1-R |
GPIB, 1 m |
MS464xA port labeled: |
MN469xC port labeled: |
|
Dedicated GPIB |
IEEE 488.2 GPIB |
|||
|
|
|
|
||
|
|
|
|
|
|
11 |
|
3-62112-81a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
b2 loop out |
TO VNA b2 OUTPUT |
|||
|
|
|
semi-rigid |
||
12 |
|
3-62112-80a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
b2 loop in |
TO VNA b2 INPUT |
|||
|
|
|
semi-rigid |
||
13 |
|
3-62112-81a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
P2 source loop out |
TO VNA Port 2 Src OUTPUT |
|||
|
|
|
semi-rigid |
||
14 |
|
3-62112-80a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
P2 source loop in |
TO VNA Port 2 Src INPUT |
|||
|
|
|
semi-rigid |
||
15 |
|
3-62112-81a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
b1 loop out |
TO VNA b1 OUTPUT |
|||
|
|
|
semi-rigid |
||
16 |
|
3-62112-80a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
b1 loop in |
TO VNA b1 INPUT |
|||
|
|
|
semi-rigid |
||
17 |
|
3-62112-81a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
P1 source loop out |
TO VNA Port 1 Src OUTPUT |
|||
|
|
|
semi-rigid |
VectorStar ME7838D4/G4 QSG |
PN: 10410-00770 Rev. C |
QSG-5 |
2. Rear Panel Connections Between System Components (MS464xA VNA)
Table 1. |
ME7838D4 Multiport Rear Panel Cable Connections (2 of 2) |
|
|||
|
|
|
|
|
|
Index |
|
Part Number |
Cable Description |
Connection From |
Connection To |
|
|
|
|
|
|
18 |
|
3-62112-80a |
SMA male-male |
MS464xA port labeled: |
MN469xC port labeled: |
|
P1 source loop in |
TO VNA Port 1 Src INPUT |
|||
|
|
|
semi-rigid |
||
19 |
|
MS464xA VNA |
|
|
|
|
|
|
|
|
|
20 |
|
MN469xC Test Set |
|
|
|
|
|
|
|
|
|
21 |
|
3736B Test Set |
|
|
|
|
|
|
|
|
|
22 |
|
3739C Test Set |
|
|
|
|
|
|
|
|
|
a. Tighten each cable in this group using an 8 mm (5/16 in) torque end wrench set to 0.9 N·m (8 lbf·in).
QSG-6 |
PN: 10410-00770 Rev. C |
VectorStar ME7838D4/G4 QSG |
3.Rear Panel Connections Between Components (MS464xB VNA)
In this section, connect the cables between the VNA and the Test Sets as shown in Figure 2 or Figure 3, and Table 2.
|
2 |
|
|
|
|
19 |
Ext In ALC 1 |
|
|
|
|
MS464xB |
|
and |
|
|
|
|
|
VNA |
Ext In ALC 2 |
2 |
|
|
|
|
|
(With Option 031) |
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
12 |
14 |
|
16 |
18 |
|
11 |
13 |
|
15 |
17 |
|
|
|
|
|
|
20 |
|
|
|
|
|
MN469xC |
|
|
|
|
|
Test Set |
Ext ALC 2 |
|
|
|
|
9 |
|
|
|
|
|
|
(With |
|
|
|
|
|
Option 031) |
|
|
|
|
|
|
8 |
7 |
7 |
7 |
7 |
2 |
|
|
|
|
21 |
|
|
|
|
|
3736B |
1 |
|
|
|
|
Test Set |
|
|
|
|
|
|
4 |
3 |
6 |
|
|
|
|
|
|
|
||
|
5 |
6 |
6 |
|
|
|
|
IF Outputs |
6 |
|
CAUTION |
|
a1 |
b |
a2 |
b2 |
|
Do not operate with |
|
|
|
|
power cord ungrounded. |
|
|
||||
2 |
Ext |
|
|
|
|
|
22 |
|
Alc |
|
|
|
|
|
|
||
Out |
|
External I/O |
|
WARNING |
~ LINE INPUT |
3739C |
||
Ext ALC |
|
|
|
able parts inside. |
85-240 VAC |
|
||
|
|
|
|
|
No operator service- |
47-63 Hz |
|
|
(With |
Ext |
|
|
|
Refer servicing to |
150 VA Max |
|
Test Set |
|
|
Module Interface |
Fuse 250V 2A T |
|
||||
|
|
|
|
|
qualified personnel. |
|
|
|
Option 031) |
Analog |
|
|
Cable Length |
|
|
|
|
In |
|
|
|
|
CAUTION |
|
|
|
|
|
|
|
Standard |
Extended |
For continued fire protection |
|
|
|
|
|
|
replace only with specified |
|
|
||
|
|
|
|
|
|
type and rated fuse. |
|
|
Figure 2 ME7838D4/G4 Multiport BB/mmW VNA System – Rear Panel Cables (With Option 031)
VectorStar ME7838D4/G4 QSG |
PN: 10410-00770 Rev. C |
QSG-7 |
3. Rear Panel Connections Between Components (MS464xB VNA)
|
|
|
|
|
19 |
|
|
|
|
|
MS464xB |
|
|
|
|
|
VNA |
2 |
|
|
|
|
|
1 |
|
|
|
|
|
|
12 |
14 |
|
16 |
18 |
11 |
13 |
|
15 |
17 |
|
|
|
|
|
|
20 |
|
|
|
|
|
MN469xC |
|
|
|
|
|
Test Set |
|
|
|
|
|
9 |
|
8 |
7 |
7 |
7 |
7 |
2 |
|
|
|
|
21 |
|
|
|
|
|
3736B |
1 |
|
|
|
|
Test Set |
|
|
|
|
|
|
4 |
3 |
6 |
|
|
|
|
5 |
6 |
6 |
|
|
|
|
IF Outputs |
6 |
|
CAUTION |
a1 |
b |
a2 |
b2 |
|
Do not operate with |
|
|
|
power cord ungrounded. |
|
|
||||
Ext |
|
|
|
|
|
22 |
|
Alc |
|
|
|
|
|
|
|
Out |
|
External I/O |
|
WARNING |
85-240 VAC |
3739C |
|
|
|
|
able parts inside. |
||||
|
|
|
|
No operator service- |
~ LINE INPUT |
|
|
|
|
|
|
47-63 Hz |
|
|
|
|
|
|
|
Refer servicing to |
150 VA Max |
|
Test Set |
Ext |
|
|
|
qualified personnel. |
Fuse 250V 2A T |
|
|
|
|
Module Interface |
|
|
|||
Analog |
|
|
Cable Length |
|
|
|
|
In |
|
|
|
|
CAUTION |
|
|
|
|
|
Standard |
Extended |
For continued fire protection |
|
|
|
|
|
replace only with specified |
|
|
||
|
|
|
|
|
type and rated fuse. |
|
|
Figure 3 ME7838D4/G4 Multiport BB/mmW VNA System – Rear Panel Cables (No Option 031)
QSG-8 |
PN: 10410-00770 Rev. C |
VectorStar ME7838D4/G4 QSG |
3. Rear Panel Connections Between Components (MS464xB VNA)
Table 2. |
ME7838D4/G4 Multiport Rear Panel Cable Connections (MS464xB) (1 of 2) |
||||
|
|
|
|
|
|
Index |
|
Part Number |
Cable Description |
Connection From |
Connection To |
|
|
|
|
|
|
1 |
|
3-806-225 |
BNC (male-male), 24 in |
MS464xB port labeled: |
3736B port labeled: |
|
Ext Analog Out |
EXT ANALOG IN |
|||
|
|
|
|
VNA port labeled: |
3736B port labeled: |
|
|
3-806-225 |
BNC (male-male), 24 in |
Ext In ALC 1 |
|
|
|
EXT ALC OUT |
|||
|
|
|
|
(No Option 031) (Figure 3) |
|
|
|
|
|
|
|
|
|
|
|
VNA port labeled: |
3739C port labeled: |
2 |
|
3-806-225 |
BNC (male-male), 24 in |
Ext In ALC 1 |
|
|
EXT ALC OUT |
||||
|
|
|
|
(With Option 031) (Figure 2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VNA port labeled: |
3736B port labeled: |
|
|
3-806-225 |
BNC (male-male), 24 in |
Ext In ALC 2 |
|
|
|
EXT ALC OUT |
|||
|
|
|
|
(With Option 031) (Figure 2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3736B port labeled: |
3739C port labeled: |
3 |
|
3-806-225 |
BNC (male-male), 24 in |
(To Test Set) EXT ANALOG |
|
|
EXT ANALOG IN |
||||
|
|
|
|
OUT |
|
|
|
|
|
|
|
|
|
|
|
3736B port labeled: |
|
4 |
|
3-806-225 |
BNC (male-male), 24 in |
(To Test Set) EXT ALC IN |
3739C port labeled: |
|
|
|
|
(Figure 3) |
EXT ALC OUT |
|
|
|
|
(Not used with Option 031) |
|
5 |
|
|
DB-25 |
3736B port labeled: |
3739C port labeled: |
|
|
TO TEST SET EXTERNAL I/O |
EXTERNAL I/O |
||
|
|
|
|
||
|
|
|
|
|
|
|
|
3-73598-1a |
SMA male-male flexible: |
3736B ports labeled: |
3739C ports labeled: |
|
|
(5 cable |
3-72243-1 |
(IF INPUTS) |
(IF OUTPUTS) |
6 |
|
bundle) |
3-72243-2 |
a1 |
a1 |
|
|
||||
|
|
|
3-72243-3 |
b1 |
b1 |
|
|
|
a2 |
a2 |
|
|
|
|
3-72243-4 |
||
|
|
|
b2 |
b2 |
|
|
|
|
SMA male-male flexible: |
MS464xB ports labeled: |
3736B ports labeled: |
|
|
|
3-72243-21 |
(Inputs/Outputs) |
(IF OUTPUTS) |
7 |
|
3-80734a |
3-72243-22 |
a1 IF |
a1 IF |
|
|
(5 cable |
3-72243-23 |
b1 IF |
b1 IF |
|
|
a2 IF |
a2 IF |
||
|
|
bundle) |
3-72243-24 |
||
|
|
b2 IF |
b2 IF |
||
|
|
|
|||
|
|
|
|
|
|
8 |
|
|
DB-25 |
MS464xB port labeled: |
3736B port labeled: |
|
|
External I/O |
TO VNA EXTERNAL I/O |
||
|
|
|
|
||
|
|
|
|
|
|
9 |
|
2100-1-R |
GPIB, 1 m |
MS464xB port labeled: |
MN469xC port labeled: |
|
Dedicated GPIB |
IEEE 488.2 GPIB |
|||
|
|
|
|
||
|
|
|
|
|
|
11 |
|
3-62112-81a |
SMA male-male |
MS464xB port labeled: |
MN469xC port labeled: |
|
b2 loop out |
TO VNA b2 OUTPUT |
|||
|
|
|
semi-rigid |
||
12 |
|
3-62112-80a |
SMA male-male |
MS464xB port labeled: |
MN469xC port labeled: |
|
b2 loop in |
TO VNA b2 INPUT |
|||
|
|
|
semi-rigid |
||
13 |
|
3-62112-81a |
SMA male-male |
MS464xB port labeled: |
MN469xC port labeled: |
|
P2 source loop out |
TO VNA Port 2 Src OUTPUT |
|||
|
|
|
semi-rigid |
VectorStar ME7838D4/G4 QSG |
PN: 10410-00770 Rev. C |
QSG-9 |