SELECTRONIC® SENSOR-OPERATED TOILET FLUSH VALVE, 1.28 GPF
BATTERY POWERED
GENERAL DESCRIPTION:
Exposed, sensor-operated Selectronic® Toilet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls. CR-P2 lithium battery powered.
PRODUCT FEATURES:
•Factory-Installed CR-P2 Lithium Battery
•Self-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance
•No Routine Maintenance: no diaphragms to replace; no filters to clean
•Selectronic® Proximity System with universal sensor provides hygienic, "hands free" operation
•State-of-the-Art Electronics prevent ghost flushing
•Dezincification Resistant brass alloy
•Fully Mechanical Manual Override Button can flush the valve without power
•Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset
•Adjustable Sanitary Flush cleans the fixture & maintains the trap seal.
•Chemical Resistant EPDM Seals for extended life
•High Back Pressure Vacuum Breaker
•Adjustable Tailpiece
•Range can be adjusted manually or with optional remote control
•No external volume adjustment.
•Can be installed left or right handed
MODEL NUMBER:
6065.121.002 Exposed, sensor-operated flush valve for 1-1/2" top spud flushometer bowls, 1.28 gpf.
Inlet includes 1" sweat solder kit and angle stop with back flow protection and vandal-resistant cap.
Outlet includes 1-1/2" high back pressure vacuum breaker with spud coupling and flange.
OPERATING PRESSURE:
25 psi (flowing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
BATTERY LIFE:
4 years @ 4,000 flushes per month
OPTIONAL ACCESSORIES:
•Cast wall flange: 1" (6065.810)
•Split ring pipe supports: 2-1/2" C-E (6065.822) & 6" C-E (6065.862)
ADA WATER CLOSET INSTALLATION:
AFWALL® TOILET SHOWN
|
Finished Wall |
|
|
ø51 mm |
|
|
(ø2") Grab Bar Diameter |
|
|
38 mm |
|
|
(1-1/2") Clearance |
|
406 mm |
|
|
(16") |
|
|
|
-C-L- |
|
293 mm |
|
|
(11-1/2") |
|
|
914 mm |
|
|
(36") |
419 mm |
|
Height to |
||
(16-1/2") |
||
Top of Grab Bar |
||
Rim Height |
||
|
||
|
Finished Floor |
**Flush Valve can be installed to meet ADA 2010 Section 609 when installed as shown
RECOMMENDED SPECIFICATION:
Electronic, sensor activated toilet flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging.
Includes a factory-installed CR-P2 lithium battery and fully mechanical manual override that can flush the valve without power. Includes dezincification-resistant brass valve body and metal cover with chrome finish. Includes angle stop with back-flow protection & vandal-resistant cap. Sweat solder kit and high back pressure vacuum breaker also included. 1.28 gpf / 4.8 Lpf flush valve shall be American Standard Model #
6065.121.002.
© 2019 AS America Inc. |
4/19 |