|
SELECTRONIC® SENSOR OPERATED |
|
CONCEALED TOILET FLUSH VALVE |
|
WITH WALL BOX FOR WALL-HUNG, BACK SPUD BOWLS |
|
BASE MODEL: (Does Not include Power Supply) |
|
606B.312 Base Model, 1.1 gpf |
|
FRONT ACCESS |
|
Fully mechanical manual override |
|
Vandal-resistant, stainless steel wall box |
|
606B.322 Base Model, 1.28 gpf |
|
SAME AS ABOVE |
|
606B.362 Base Model, 1.6 gpf |
|
SAME AS ABOVE |
|
POWER KITS: (Must be Purchased Separately) |
|
PK00.CRP CR-P2 lithium battery and holder |
|
PK00.WRK PWRX 10-Year battery pack and holder |
GENERAL DESCRIPTION: |
PK00.PAC Plug-In AC transformer and capacitor |
Concealed, Sensor Operated Selectronic® Toilet Flush |
module |
|
|
Valve with Wall Box (Front Access) for wall-hung bowls |
PK00.HAC Hard-Wired AC transformer, 10' |
with 1-1/2" back spud. |
extension cable and capacitor module |
PRODUCT FEATURES: |
PK00.MAC Multi-AC adapter and 10" extension |
||
cable |
|
|
|
• Self-Cleaning Piston with integral wiper spring |
OPERATING PRESSURE: |
|
|
significantly reduces clogging and maintenance |
|
||
• Selectronic® Proximity System with universal |
25 psi (flowing) - 80 psi (static) |
|
|
sensor provides hygienic, "hands free" operation |
FLOW REQUIREMENT: |
|
|
• State-of-the-Art Electronics prevent ghost flushing |
|
||
25 gpm (94.6 L/min.) |
|
||
• Dezincification Resistant semi-red brass alloy |
|
||
|
|
|
|
• Fully Mechanical Manual Override Button |
|
|
|
can flush the valve without power |
|
|
|
• Fail-Safe: Valve automatically closes upon loss of power |
|
|
|
or water pressure and does not need to be reset |
|
|
mm |
• Adjustable Sanitary Flush cleans the fixture & |
|
403 |
|
|
(15- |
|
|
|
|
7/8") |
|
maintains the trap seal. |
|
|
|
• Chemical resistant EPDM Seals for extended life |
|
|
|
• Adjustable tailpiece for rough-in flexibility |
|
|
|
• Can be installed left or right handed |
|
|
|
• All exposed parts are chrome-plated |
|
|
|
INCLUDES: |
279 |
mm |
|
(11") |
|
||
|
|
||
• 1" I.P.S. angle stop with back-flow protection and |
|
|
|
hand wheel |
|
|
|
• 1" Sweat solder adapter |
|
|
|
• 1-1/2" Vacuum breaker with spud coupling and flange |
|
|
|
SUGGESTED SPECIFICATION
Electronic, sensor activated toilet flush valve for wall-hung bowls (with 1-1/2" back spud) shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Shall feature a fully mechanical manual override that can flush the valve without power. Shall also feature a semi-red brass valve body and vandal-resistant stainless steel wall box that includes the sensor and manual override button. Includes angle stop with back-flow protection and hand wheel. Sweat solder adapter and vacuum breaker also included. Must be installed and maintained from the front. Flush Valve shall be American Standard Model # 606B_3_2.007.
© 2016 AS America Inc. |
(9/16) |