SELECTRONIC® SENSOR-OPERATED TOILET FLUSH VALVE, 1.28 GPF
HARD-WIRED AC POWERED
GENERAL DESCRIPTION:
Exposed, sensor-operated Selectronic® Toilet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls, 1.28 gpf. Hard-Wired AC powered.
Inlet includes 1" sweat solder kit and angle stop with back flow protection and vandal-resistant cap.
Outlet includes 1-1/2" high back pressure vacuum breaker with spud coupling and flange.
PRODUCT FEATURES:
•Universal Input Voltage: 100-240 VAC, 50/60 Hz
•Optional Chrome Cover Plate: Only required if AC transformer must be installed from the front
MODEL NUMBER:
6067.121.002 Hard-Wired AC Powered:
Includes Class 2 UL certified universal hard-wired AC transformer (electrical box by others).
6068.121.002 Multi-AC Powered:
Includes 10' extension cable and Y-connector. One transformer can power up to 15 faucets and/ or flush valves in a daisy chain configuration
TRANSFORMER NOT INCLUDED.
OPERATING PRESSURE:
Overall Range: 20-125 psi**
Recommended: 25 psi (flowing)-80 psi (static)
** Water pressure over 80 psi is not recommended for most plumbing fixtures.
FLOW REQUIREMENT:
25gpm (94.6 L/min.)
ACCESSORIES:
•Cast wall flanges: 1" (6065.810) & 1-1/2" (6065.815)
•Solid ring pipe supports: 2-1/2" C-E (6065.821) & 6" C-E (6065.861)
•Split ring pipe supports: 2-1/2" C-E (6065.822) & 6" C-E (6065.862)
•Self-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance
•Selectronic® Proximity System with universal sensor provides hygienic, "hands free" operation
•State-of-the-Art Electronics prevent ghost flushing
•Dezincification Resistant semi-red brass alloy
•Fully Mechanical Manual Override Button can flush the valve without power
•Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset
•Adjustable Sanitary Flush cleans the fixture & maintains the trap seal.
•Stadium Feature: Valve automatically switches to water savings mode during periods of heavy usage
•Chemical Resistant EPDM Seals for extended life
•High Back Pressure Vacuum Breaker
•Adjustable Tailpiece
•Range can be adjusted manually or with optional remote control
•No external volume adjustment.
•Can be installed left or right handed
|
TYPICAL WATER CLOSET INSTALLATION: |
|
|
AFWALL™TOILET SHOWN |
|
|
FINISHED WALL |
|
|
73mm |
160mm |
86mm |
(6-1/4") |
|
(2-7/8") |
|
|
(3-3/8") |
|
|
|
COVER & |
|
|
ELECTRICAL |
|
|
BOX |
|
409mm |
|
SUPPLY |
(16-1/8") |
-C-L- |
DN 25mm |
|
(1" I.P.S.) |
|
|
|
|
293mm |
|
|
(11-1/2") |
|
108mm - 134mm |
|
|
(4-1/4" - 5-1/4") |
|
|
FINISHED |
|
|
FLOOR |
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES-CHECK LOCAL CODES
RECOMMENDED SPECIFICATION:
Electronic, sensor activated toilet flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clog - ging. Powered by Class 2 UL certified hard-wired AC transformer with universal input voltage of 100 - 240 VAC, 50/60 HZ. Includes a fully mechanical manual override that can flush the valve without power. Includes semi-red brass valve body and metal cover with chrome finish.
Includes angle stop with back-flow protection & vandal-resistant cap. Sweat solder kit and high back pressure vacuum breaker also included. 1.28 gpf / 4.8 Lpf flush valve shall be American Standard Model # 606_.121.002.
L321
© 2014 AS America Inc. |
11/14 |
Loading...