SELECTRONIC® SENSOR-OPERATED TOILET FLUSH VALVE, 1.1 GPF
BATTERY POWERED
GENERAL DESCRIPTION:
Exposed, sensor-operated Selectronic® Toilet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls. CR-P2 lithium battery powered.
PRODUCT FEATURES:
•Factory-Installed CR-P2 Lithium Battery
•Selectronic® Proximity System with universal sensor provides hygienic, "hands free" operation
•State-of-the-Art Electronics prevent ghost flushing
•Dezincification Resistant semi-red brass alloy
•Fully Mechanical Manual Override Button can flush the valve without power
MODEL NUMBER:
6065.111.002 Exposed, sensor-operated flush valve for 1-1/2" top spud flushometer bowls, 1.1 gpf.
Inlet includes 1" sweat solder kit and angle stop with back flow protection and vandal-resistant cap.
Outlet includes 1-1/2" high back pressure vacuum breaker with spud coupling and flange.
OPERATING PRESSURE:
25 psi (flowing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.)
BATTERY LIFE:
4 years
OPTIONAL ACCESSORIES:
•Cast wall flanges: 1" (6065.810) & 1-1/2" (6065.815)
•Solid ring pipe supports: 2-1/2" C-E (6065.821) & 6" C-E (6065.861)
•Split ring pipe supports: 2-1/2" C-E (6065.822) & 6" C-E (6065.862)
TYPICAL WATER CLOSET INSTALLATION:
AFWALL™ TOILET SHOWN
•Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset
•Adjustable Sanitary Flush cleans the fixture & maintains the trap seal.
•Stadium Feature: Valve automatically switches to water savings mode during periods of heavy usage
•Chemical Resistant EPDM Seals for extended life
•High Back Pressure Vacuum Breaker
•Adjustable Tailpiece
•Range can be adjusted manually or with optional remote control
•No external volume adjustment.
•Can be installed left or right handed
FINISHED WALL |
|
|
|
73 mm |
|
|
(2-7/8") |
|
419 mm |
|
|
(16-1/2") |
|
SUPPLY |
|
CRITICAL |
|
|
DN 25 mm |
|
-C-L- |
LEVEL |
(1" I.P.S.) |
293 mm |
SEE ROUGH-IN |
108 - 134 mm |
(11-1/2") |
ON BACK |
(4-1/4" - 5-1/4") |
|
|
|
|
FINISHED |
|
|
FLOOR |
|
RECOMMENDED SPECIFICATION:
Electronic, sensor activated toilet flush valve shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging.
Includes a factory-installed CR-P2 lithium battery and fully mechanical manual override that can flush the valve without power. Includes semi-red brass valve body and metal cover with chrome finish. Includes angle stop with back-flow protection & vandal-resistant cap. Sweat solder kit and high back pressure vacuum breaker also included. 1.1 gpf / 4.2 Lpf flush valve shall be American Standard Model # 6065.111.002.
© 2016 AS America Inc. |
Revised 5/16 |