SELECTRONIC® SENSOR OPERATED
CONCEALED TOILET FLUSH VALVE
FOR FLOOR-MOUNT, BACK SPUD BOWLS
BASE MODEL: (Does Not include Power Supply)
GENERAL DESCRIPTION:
Concealed, Sensor Operated Selectronic Toilet
Flush Valve (Rear Access) for floor mount bowls with 1-1/2" exposed back spud.
PRODUCT FEATURES:
•Self-Cleaning Piston with integral wiper spring significantly reduces clogging and maintenance
606B.211 Base Model, 1.1 gpf/4.2 Lpf
FRONT ACCESS
Fully mechanical manual override Chrome-plated metal wall plate
606B.221 Base Model, 1.28 gpf/4.8 Lpf
SAME AS ABOVE
606B.261 Base Model, 1.6 gpf/6.0 Lpf
SAME AS ABOVE
POWER KITS: (Must be Purchased Separately)
PK00.CRP CR-P2 lithium battery and holder
PK00.WRK PWRX™ 10-Year battery pack and holder
PK00.PAC Plug-In AC transformer and Single AC adapter
PK00.HAC Hard-Wired AC transformer,
10' extension cable and Single AC adapter
PK00.MAC Multi-AC adapter and 10" extension cable
OPERATING PRESSURE:
25 psi (flowing) - 80 psi (static)
•Selectronic Proximity System with universal sensor provides hygienic, "hands free" operation
•State-of-the-Art Electronics prevent ghost flushing
•Dezincification Resistant brass alloy
•Fully Mechanical Manual Override Button can flush the valve without power
•Fail-Safe: Valve automatically closes upon loss of power or water pressure and does not need to be reset
•Adjustable Sanitary Flush cleans the fixture & maintains the trap seal.
•Chemical resistant EPDM Seals for extended life
•Adjustable tailpiece for rough-in flexibility
•Can be installed left or right handed
•All exposed parts are chrome-plated
INCLUDES:
•1" I.P.S. angle stop with back-flow protection and hand wheel
FLOW REQUIREMENT:
25 gpm/94.6 L/min
160 mm (6-1/4")
160 |
mm |
(6-1/4") |
•1" Sweat solder adapter
•1-1/2" Vacuum breaker with spud coupling and flange
ADA COMPLIANT
SUGGESTED SPECIFICATION
Electronic, sensor activated toilet flush valve for floor-mount bowls (with 1-1/2" exposed back spud) shall feature self-cleaning piston valve with integral wiper spring in refill orifice to prevent clogging. Shall feature a fully mechanical manual override that can flush the valve without power. Shall also feature a dezincification-resistant brass valve body and vandal-resistant chrome-plated metal wall plate that includes the sensor and manual override button. Includes angle stop with back-flow protection and hand wheel. Sweat solder adapter and vacuum breaker also included. Must be installed and maintained from the rear. Flush Valve shall be American Standard Model # 606B_2_1.007.
© 2018 AS America Inc. |
6/18 |