SELECTRONIC® SENSOR-OPERATED TOILET FLUSH VALVE
HARD-WIRED AC POWER, BASE MODEL
GENERAL DESCRIPTION:
Exposed, Sensor Operated Selectronic® Water Closet Flush Valve for floor-mounted or wall-hung 1-1/2" top spud bowls.
Inlet includes 1" I.P.S. angle stop with back-flow protection, vandal-resistant cap, sweat solder kit, cover tube and wall flange.
Outlet includes 1-1/2" vacuum breaker, spud coupling and flange.
PRODUCT FEATURES:
•Electronic flush valve with Selectronic® proximity system for “Hands Free” operation
•Self-Cleaning Piston operation with integral wiper spring prevents clogging and reduces maintenance
•Piston operation delivers superior flush accuracy and repeatability
•Adjustable tailpiece
•Chemical resistant EPDM seals are unaffected by chloramines and ammonia
•Valve remains closed and does not need to be reset after loss of power or water pressure
•Stadium Feature: Valve automatically switches to water conservation mode during periods of heavy usage
•Fully Mechanical Manual Override Button can flush toilet during a power outage
•Vandal-resistant metal cover plate (for 2-gang electric box supplied by others) with no visible fasteners
•Sensor & electronic controls are fully enclosed and water resistant
•Range can be adjusted manually or by remote control
•Sanitary Flush - Valve automatically flushes after 24 hours of non-use to clean fixture & maintain trap seal
•No external volume adjustment
•5 second Arming Delay prevents unintentional flushing
•3-second Flush Delay
•Can be installed left or right-handed
BASE MODEL: (Does Not Include Power Supply)
606B.161 Base Model, 1.6 gpf
For use with Hard-Wired AC or Multi-AC power kits. 11-1/2" rough-in
606B.121 Base Model, 1.28 gpf
SAME AS ABOVE
606B.111 Base Model, 1.1 gpf
SAME AS ABOVE
606B.761 Base Model, Dual Flush 1.6 / 1.1 gpf
SAME AS ABOVE
606B.721 Base Model, Dual Flush 1.28 / 1.1 gpf
SAME AS ABOVE
POWER KITS: (Must be Purchased Separately)
PK00.HAC Hard-Wired AC transformer, 10’ extension cable and capacitor module
PK00.MAC Multi-AC adapter and 10” extension cable
OPERATING PRESSURE:
25 psi (flowing) - 80 psi (static)
FLOW REQUIREMENT:
25 gpm (94.6 L/min.) |
|
|
|
TYPICAL WATER CLOSET INSTALLATION: |
|
|
AFWALL® TOILET SHOWN |
|
|
FINISHED WALL |
|
|
73 mm |
160 mm |
86 mm |
(6-1/4") |
|
(2-7/8") |
|
|
(3-3/8") |
|
|
|
COVER & |
|
|
ELECTRICAL |
|
|
BOX |
|
409 mm |
|
SUPPLY |
(16-1/8") |
-C-L- |
DN 25mm |
|
(1" I.P.S.) |
|
|
|
|
293 mm |
|
|
(11-1/2") |
|
108 mm - 134 mm |
|
|
(4-1/4" - 5-1/4") |
|
|
FINISHED |
|
|
FLOOR |
Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for accessible
and usable building facilities - check local codes
RECOMMENDED SPECIFICATION:
Electronic proximity infrared sensor activated toilet flush valve shall feature self-cleaning piston valve. Includes a UL listed hard-wired power supply that provides 6 VDC power to run system. Includes a fully mechanical manual over-ride that can provide a complete flush without power. Includes cast brass valve body and metal cover with chrome finish and vandal resistant stop cap. Angle stop with back-flow protection and vacuum breaker included. Flush valve shall be American Standard Model # 606B.___.002
© 2016 AS America Inc. |
9/16 |