Page 1
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Pega 357 with 04PC Control Layout Drawings
Amada America I nc.
7025 Firestone Blvd.
Buena Park CA. 90621
Phone: (714) 739 2111
Fax: (714) 739 4099
Email info@amada.com
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 1 of 9
Page 2
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Warning
! Qualified personnel must complete all work.
! Do not apply power to the Pega 357 until an A.E.S.I. (Amada Engineering and
Service Incorporated) Engineer is present and has instructed you to do so.
! Not all information required for proper installation, of the Pega 357 is included with
this document. Specific details for proper installation are found in the document
Pega 357 with 04PC User Pre-installation Guide available at the Amada America
Internet web site at http://www.amada.com.
! Considerable effort has been made to ensure that this manual is free of
inaccuracies and omissions. However, as we are constantly improving our
product, some of the data contained herein may be out of date. Please check our
Internet site, http://www.amada.com, for the latest release of this document.
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 2 of 9
Page 3
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Table Of Contents
Planning the Location of the Machine..............................................................................................................................................4
Plan View - Pega 357.......................................................................................................................................................................5
Plan View - Pega 357 with V357hs Conveyor..................................................................................................................................6
Plan View - Pega 357 with V357hs Conveyor and MP1225 Loader ................................................................................................7
End View - Pega 357 .......................................................................................................................................................................8
Elevation View - Pega 357...............................................................................................................................................................9
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 3 of 9
Page 4
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
Planning the Location of the Machine
The following diagrams provide the details for positioning your new machine.
! Not all information required for proper installation, of the Pega 357 is included with this document. Specific details for
proper installation are found in the document Pega 357 with 04PC User Pre-installation Guide available at the Amada
America Internet web site at http://www.amada.com.
! No obstacles are allowed in the worksheet travel area and the ceiling must be at least 40" above the Pega 357.
! All of the Recommended Safety / Maintenance areas should be used, but you must at least ensure that the doors of the
04PC control unit can be opened. Any reduction of the Recommended Safety / Maintenance areas may increase the
possibility of personnel injury and increase the time and cost of installation or maintenance.
! The Pega 357 and 04PC control must be protected from direct sunlight or other heat sources. Exposure to direct heating
sources such as infrared heaters have been shown to affect punch and die alignment.
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 4 of 9
Page 5
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
88.00
l
0
C
g
g
39
5.04"
0
56"
Adjusta
ble 50" to
90"
h
s
y
Plan View - Pega 357
Electrical Requirements
Pega 357
E1
230 / 460 / 3 / 60 ±10% 18 kVA
46 amps @ 230 / 3 / 60 VAC
23 amps @ 460 / 3 / 60 VAC
Compressed Air Requirements
A1
Pega 357
80 psi @ 2.9 ft³/min.
Indicates Operator Control Station
12" 12" 12"
Scale
/ Maintenance Area 40" from all components
105.97"71.87"
Y axis origin
Optional Material
e
Support Tables Required
ran
.21"
"
1.
27.
4P
anuc
PEGA 357
0.00" workin
177.84" Pega 357 length
38.44" Recomended Safet
Optional Material
Support Tables Required
A1
Pega 357
Centerline
72.05" 76.69"
148.74" Pega 357 widt
" Maximum travel area 144" materia
368.00" Recomended Safety / Maintenance Area 40" from all component
2
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 5 of 9
Page 6
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
l
0
C
g
g
39
5.04"
0
56"
Adjusta
ble 50"
to
90"
y
h
s
Plan View - Pega 357 with V357hs Conveyor
Electrical Requirements
Pega 357
E1
230 / 460 / 3 / 60 ±10% 18 kVA
46 amps @ 230 / 3 / 60 VAC
23 amps @ 460 / 3 / 60 VAC
P357hs Conveyor
E2
208 - 230 / 460 / 3 / 60 ±10% .8 kVA
2.1 amps @ 208 / 3/ 60 VAC
2.0 amps @ 230 / 3 / 60 VAC
1.0 amps @ 460 / 3 / 60 VAC
Compressed Air Requirements
A1
Pega 357
80 psi @ 2.9 ft³/min.
Indicates Operator Control Station
12" 12" 12"
Scale
105.97"71.87"
Y-axis Origin
Optional Material
e
Support Tables Required
ran
.21"
"
1.
27.
4P
anuc
PEGA 357
/ Maintenance Area 40" from all components
177.84" Pega 357 length
08.44" Recommended Safet
0.00" workin
Optional Material
Support Tables Required
A1
P357hs Conveyor
Pega 357 Centerline
70.01"
E2
44.70"
Access required this
area for slug removal
72.05" 76.69"
148.74" Pega 357 widt
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 6 of 9
368.00" Recommended Safety / Maintenance Area 40" from all component
288.00" Maximum travel area 144" materia
Page 7
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
s
5
g
88.00
l
g
g
39
5.04"
0
56"
Adjustable 50" to 90"
y
y
h
Plan View - Pega 357 with V357hs Conveyor and MP1225 Loader
Electrical Requirements
Pega 357
E1
230 / 460 / 3 / 60 ±10% 18 kVA
46 amps @ 230 / 3 / 60 VAC
23 amps @ 460 / 3 / 60 VAC
P357hs Conveyor
E2
208 - 230 / 460 / 3 / 60 ±10% .8 kVA
2.1 amps @ 208 / 3/ 60 VAC
2.0 amps @ 230 / 3 / 60 VAC
1.0 amps @ 460 / 3 / 60 VAC
MP1225 Loader
E3
200 / 3 / 60 ±10%, 10 Kva
To operate at 230 / 460 VAC a step up
transformer is required with the following
service is required
29 amps @ 200 / 3 / 60 VAC
26 amps @ 230 / 3 / 60 VAC
13 amps @ 460 / 3 / 60 VAC
Compressed Air Requirements
Pega 357
A1
MP1225 Loader 75 psi @ 31.8 ft³/min.
A2
80 psi @ 2.9 ft³/min.
Indicates Operator Control Station
12" 12" 12"
Scale
105.97"71.87"
Y-axis load position
Optional Material
e
Support Tables Required
ran
Power Suppl
.21"
"
1.
27.
PEGA 357
MP1225
E3
Xformer
A2
4"123.10"
.
th
/ Maintenance Area 40" from all components
177.84" Pega 357 length
408.44" Recomended Safet
0.00" workin
89.63" MP1225 Loader Len
Optional Material
Support Tables Required
A1
MP1225 Loader
Access required this area
for material loading / unloading
P357hs Conveyor
Pega 357 Centerline
E2
44.70"
Access required this
area for slug removal
72.05" 76.69"
148.74" Pega 357 widt
2
" Maximum travel area 144" materia
441.79" Recomended Safety / Maintenance Area 40" from all component
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 7 of 9
70.01"
141.74" MP1225 Loader width
Page 8
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
"
30
"
e
05"
s
End View - Pega 357
37.68"*
Material
Pass Line
17.32
14.76"
76.69" 72.
.71
12"
119.84"*
85.59"*
cal
*Dimension varies with installed option
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 8 of 9
Page 9
Pega 357 with 04PC Control Layout Drawings ©Amada America, Inc.
"
"
"
50"
"
"
"103.15"
6"
s
Elevation View - Pega 357
Center T rac k 200
51.77" Throat Depth
37.68"*
Material
Pass Line
33.47
*Dimension subject to change with installed option
2.87
50.00" Track 200
Working Range
.84
11.02
.
177.84
7.7
.47
27.56"
12"
Scale
85.59"
62.99"
12"
Print Date 03/02/2001 Revision 4. 0 This document availabl e on t he World Wide Web at http://www.amada.com Page 9 of 9
Loading...