Alpine INE-W957HD, X008U Owners Manual
R
R
8-INCH ADVANCED NAVI STATION
EN
X0 08U
7-INCH ADVANCED NAVI STATION
FR
INE-W957HD
ES
This HD Radio receiver enables:
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
•MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
Thank you for purchasing this Alpine product. Please take a moment to protect your purchase by
registering your product now at the following address: www.alpine-usa.com/registration
You will be informed of product and software updates (if applicable), special promotions, news
about Alpine, and entered for a chance to win prizes.
Merci d’avoir acheté ce produit Alpine. Nous vous invitons à consacrer un moment à la protection
de votre achat en enregistrant votre produit dès maintenant à l’adresse suivante :
www.alpine-usa.com/registration
Vous serez tenu informé des mises à jour des produits et des logiciels (le cas échéant), des
promotions spéciales, de l’actualité d’Alpine, et vous aurez une chance de remporter des prix.
Gracias por adquirir este producto Alpine. Con solo unos pocos pasos podrá proteger su producto,
registrándolo a través de la siguiente dirección: www.alpine-usa.com/registration
Recibirá información sobre nuevos productos y software, promociones especiales, novedades sobre
Alpine y participará en el sorteo de premios.
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
.
.
.
Designed by ALPINE Japan
68-24567Z41-A
ALPINE ELECTRONICS MARKETIN G, INC.
1-7, Yukigaya-Otsukamachi, Ota- ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, Fra nce
Phone 01-48638989
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
Wilhelm-Wagenfeld-Str. 1-3, 80807 München, Germany
ALPINE ELECTRONICS GmbH
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Alpine House
Phone 0870-33 33 763
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ENGLISH
Contents
Operating
Instructions
PRECAUTIONS
IMPORTANT INFORMATION ....................... 8
WARNING
Points to Observe for Safe Usage ..................... 8
WARNING ................................................. 9
CAUTION .................................................. 9
NOTICE ................................................... 10
Discs Playable on This Unit ................. 11
Features
Auto user setting change ................................ 15
My Favorites ................................................... 15
Easy sound setting by car type
(i-Personalize) ............................................. 16
About Dual Screen ......................................... 16
Dual Screen Display Position ..................... 17
Getting Started
Accessory List ................................................ 18
Location of Controls ...................................... 18
Turning Power On or Off ............................... 18
Turning the System On ................................... 19
Initial System Start-Up ................................... 19
Inserting/Ejecting a Disc ................................ 19
Inserting the Disc ........................................ 19
Removing the Disc ...................................... 19
Adjusting the Screen Viewing Angle ............. 20
Adjusting the Volume ..................................... 20
Lowering Volume Quickly ............................. 20
Common Operations
Using My Favorites .........................................20
User Registration ............................................21
Setting My Favorites .......................................22
Adding My Favorites ...................................22
Editing My Favorites ...................................22
Displaying the Camera Image .....................23
i-Personalize Setup ......................................23
Easy Sound Setup mode/BASS ENGINE SQ
mode ............................................................24
Easy Sound Setup mode ..............................24
BASS ENGINE SQ mode ...........................24
Access to iDataLink Mode .............................25
Applying TuneIt ..............................................25
Adjusting the sound via the Smartphone .....25
Facebook Notification Function ..................25
Settings When Switching Users ......................27
How to Input Characters and Numbers
(Keypad) ......................................................27
Top banner and Bottom banner Fade Out
Setting ..........................................................28
Switching Sources ...........................................28
Screen Off Function .....................................28
Rear Entertainment Function ..........................29
Switching the Dual Screen Display ................29
Touch operation ..............................................29
Selecting an Item in a List ..............................29
About the Indicator Display ............................30
Radio/HD RadioTM/ RBDS
Listening to the Radio .....................................31
Presetting Stations Manually ..........................31
Presetting Stations Automatically ...................32
Tuning to Preset Stations ................................32
Forced Analog Mode ......................................32
Receiving a Multicast (HD Radio mode
only) .............................................................32
PTY (Program Type) Tuning (Analog
Broadcasts only) ..........................................32
Displaying Radio Text ....................................33
Storing the tag information (HD Radio mode
only) .............................................................33
About the Feature Logos .................................33
3-EN
CD/MP3/WMA/AAC
Playback .......................................................... 34
Repeat Play .....................................................34
M.I.X. (Random Play) .................................... 34
Selecting Folders (Concerning MP3/WMA/
AAC) ...........................................................35
Searching from CD Text ................................. 35
File/Folder Name Search (Concerning MP3/
WMA/AAC) ................................................ 35
About MP3/WMA/AAC .................................35
DVD
Playing a Disc ................................................ 37
If a Menu Screen Appears ........................... 38
Numeric Keypad Input Operations .............38
Displaying the Top Menu Screen ...............39
Displaying the Menu Screen ...................... 39
Stopping Playback (PRE STOP) ................... 39
Stopping Playback .........................................39
Fast-forwarding/Fast-reversing ...................... 39
Finding the Beginnings of Chapters/Tracks/
Files ............................................................ 39
Playing Still Frames (Pausing) ...................... 40
Forward frame-by-frame Playback ................40
Slow Motion Playback ...................................40
Selecting Folders ........................................... 40
Repeat Playback ............................................ 40
Searching by Title Number ............................ 41
Searching Directly by Chapter Number ........41
Searching for a Desired Video File ................ 41
Switching the Angle ...................................... 41
Switching the Audio Tracks ..........................42
Switching the Subtitles (Subtitle
Language) ................................................... 42
About DivX
®
..................................................42
Setup
Setup Operation
General Setup
General Setup Operation ................................43
iDataLink Setup .............................................. 43
Setting the Source Category ........................ 43
Setting the Hands-free Connection .............44
Setting the Default Vehicle Screen .............. 44
Setting the Maestro Module ........................ 44
Text Display Setting .......................................44
Setting the Scroll .........................................44
Format settings ............................................ 44
Setting the Menu Language ........................ 44
Remote Sensor Setting .................................... 44
Setting Top banner and Bottom banner
Display ........................................................44
Screen/LED Customize .................................. 45
Setting the Brightness of the
Backlighting .............................................45
Adjusting the Minimum Level of
Backlight ..................................................45
Adjusting the Dimmer of Button Lighting at
Night ........................................................45
Switching the Display Color ....................... 45
Adjusting the Touch Panel ..........................45
Initializing the Touch Panel Corrected
Values ....................................................... 45
Visual Setting ..................................................45
Switching Display Modes ........................... 46
Adjusting the Live Contrast ........................ 46
Selecting the Visual EQ Mode
(Factory’s setting) ....................................46
Adjusting Brightness ................................... 46
Adjusting Color of Picture .......................... 46
Adjusting Tint of Picture .............................46
Adjusting Image Contrast ...........................47
Adjusting Picture Quality ............................47
Saving and calling the adjusted picture
quality ......................................................47
About X008U/INE-W957HD ......................... 47
Displaying the Product Information ............ 47
Checking the DivX
Initializing the System .................................47
Installation Setup ............................................48
Setting the External Audio Processor
On/Off ......................................................... 48
Setting the Digital Output ............................... 48
®
Registration ............... 47
4-EN
Sound Setup
Sound Setup Operation ................................... 48
Setting the Balance/Fader/Subwoofer ............ 49
Setting the Balance/Fader ............................ 49
Rear Speaker Setting ................................... 49
Turning Subwoofer ON/OFF ...................... 49
Adjusting the Subwoofer Level ................... 49
Setting the Subwoofer Phase ....................... 49
Setting the MX (Media Xpander) ...................49
Equalizer Presets ............................................. 50
Adjusting the Parametric Equalizer Curve
(Parametric EQ) ........................................... 50
Adjusting the Time Correction (Time
Correction) ..................................................51
Adjusting the Crossover Settings
(X-Over) ...................................................... 52
Setting Defeat .................................................52
Volume Setting ................................................ 52
Setting the Volume for Each Source ............... 52
About Time Correction ...................................53
About the Crossover ....................................... 54
Source Setup
Source Setup Operation .................................. 55
Source Layout Setting .................................... 55
Setting the Slide Source Change ................. 55
Setting the Easy Sound Setup Position ....... 55
Customizing the Source Banner .................. 55
Disc Setting ..................................................... 56
Changing the language setting .................... 56
Setting of the Menu Language .................... 56
Setting of the Audio Language ................... 56
Setting of the Subtitle Language ................. 56
Changing the Country Code Setting ........... 56
Setting the Rating Level (Parental Lock) .... 56
Setting the TV Screen Mode ....................... 57
SiriusXM Setting ............................................ 58
Managing Artist, Song and Sports Team
Alerts ........................................................58
Setting the Favorite Sports Team Alerts ...... 58
Setting the Parental Lock ............................ 59
Signal Strength Information ........................59
Auxiliary (AUX) Setting ................................60
Setting the Auxiliary (AUX) Mode ............. 60
Setting the Primary Auxiliary (AUX) Name
(AUX 1 Setup) ......................................... 60
Setting the AUX3 ........................................60
Setting the AUX 3 Source Select (Switching
the Visual Input Signal System) ...............60
Rear Seat Entertainment (RSE) Setting .......... 60
Setting the Rear Seat Entertainment
System ......................................................60
Setting the Bluetooth Pandora
TuneIt Setting .................................................61
Setting the Communication Mode with a
Smartphone ..............................................61
Bluetooth Setup
Bluetooth Setup Operation ............................. 61
Setting Hands-free Connection of
iDataLink .....................................................62
Bluetooth Setting ............................................ 62
Displaying Bluetooth Information .................. 62
Registering the Bluetooth Device ................... 62
Automatic Connection setting ........................ 63
Setting the Passcode ....................................... 63
Changing the Character Code of the Phone
Book ............................................................63
Selecting the Output Speaker ......................... 63
Adjusting the Caller Volume .......................... 63
Adjusting the Microphone Level .................... 63
Adjusting the Ring Tone Volume ................... 63
Deleting All the Histories ............................... 63
Camera Setup
Camera Setup Operation .................................64
Direct Camera Setting ....................................64
Setting the Camera Input .............................64
AUX Camera Setting ...................................... 65
Setting the Camera Input .............................65
Camera Interrupt Setting (Power OFF
Mode) ..........................................................66
Reverse Mute Setting ...................................... 66
®
......................61
Bluetooth Operation
Setup Before Using ......................................... 67
About Bluetooth ..........................................67
About the Hands-Free Phone ......................67
Before Using Bluetooth ............................... 67
5-EN
Hands-Free Phone Control
Connecting a Bluetooth Device ...................... 67
Disconnecting the Bluetooth
Connection ...............................................67
Changing the connecting Bluetooth
Device .......................................................... 68
Answering a Call ............................................68
Adjusting ringtone volume ..........................68
Hanging up the Telephone ..............................68
Calling ............................................................68
Using Short Cut Dialing to Make a Call ..... 68
Dialing a Number In Call History ............... 68
Dialing a Number In the Phone Book ......... 69
Entering a Phone Number to Make a Call ...69
Redial Function ........................................... 69
Using Voice Recognition function .................. 69
Using Siri ....................................................69
Voice Dial Function ..................................... 70
Operations During a Conversation ................. 70
Adjusting the Speech Volume ..................... 70
Changing the Voice Output ......................... 70
DTMF (Touch-Tone) Function .................... 70
Phone Book Function .....................................71
Synchronizing the Phone Book ................... 71
Adding the Phone Book .............................. 71
Deleting the Phone Book Entries ................ 71
Assigning as a Short Cut Dialing Number .....72
Bluetooth Audio
Playback .......................................................... 72
Repeat Play .....................................................73
M.I.X. (Random Play) .................................... 73
Selecting Groups .............................................73
Search Function ..............................................73
Playing the iDataLink Bluetooth Audio
Auxiliary Device (Optional)
Operating Auxiliary Devices (Optional) ........74
Operating an External DVD Player ................ 74
Change to the External DVD Mode ............74
About the DVD Operation Screen ............... 74
Operating an External DVD Changer ............. 75
Change to the External DVD Changer
Mode ........................................................75
About the DVD Changer Operation
Screen .......................................................75
Operating the Mobile Digital TV Receiver
(DVB-T) ...................................................... 76
Changing to the Mobile Digital TV Receiver
(DVB-T) Mode ........................................76
About the DVB-T operation screen .............76
Operating a TV ...............................................76
Change to the TV mode .............................. 76
About the TV operation screen ................... 76
Camera Operation (Optional)
Rear Camera Operation ..................................77
Displaying the rear view video while the car
is in reverse ..............................................77
Switching the Image Pattern for the Rear
Camera .....................................................77
Guide Display ON/OFF Setting .................. 77
Adjusting the Caution Display Location ..... 77
About the Rear Camera Guide ........................ 78
Front Camera Operation ................................. 80
Displaying the Front View Video
Manually ..................................................80
Switching the Image Pattern for the Front
Camera .....................................................80
About the adjustment of guide display
ON/OFF setting and adjustment of Caution
display location ........................................80
Other Camera Operation .................................80
About the adjustment of the Caution display
location ....................................................80
SiriusXM Satellite Radio Operation
(Optional)
Receiving Channels with the SiriusXM
Tuner ...........................................................81
Tuning Channels by Category ........................ 81
Changing the Display ..................................... 81
Checking the SiriusXM Radio ID Number ....82
Storing Channel Presets ..................................82
Tuning Channels using Presets .......................82
Tune Start Function ........................................82
Tune Scan Function ........................................82
Search Function ..............................................83
Selecting the Channel directly ........................83
Storing the desired Song/Artist ....................... 83
Receiving and Tuning to an Alert ................... 84
Replay Function .............................................. 84
Parental Lock Function ...................................84
Using Jump Memory and Jump Recall
function .......................................................84
Storing the Tag information ............................85
6-EN
Playing the iDataLink SiriusXM .................... 85
Flash Memory (Optional)
Playback .......................................................... 86
Repeat Play .....................................................87
Random Play (M.I.X.) ....................................87
Random Play (M.I.X. ALL) ........................... 87
Searching for a Desired Song ......................... 87
File/Folder Name Search .............................87
Tag Search ...................................................88
Direct Up/Down Function .............................. 88
Select the desired Folder (Folder up/down) .... 88
Playing the iDataLink USB/iPod .................... 88
END USER LICENSE AGREEMENT
(NAVTEQ) ................................................107
Installation and
Connections
Warning ................................................ 108
Caution ................................................. 108
Precautions .......................................... 108
Installation ....................................................109
Connections ..................................................112
System Example ...........................................115
iPod/iPhone (Optional)
Playback .......................................................... 90
Searching for a Music File .............................. 90
Searching for a Desired Video File ................. 91
Alphabet Skip Function ..................................91
Direct Up/Down Function .............................. 91
Search Position Memory ................................91
Repeat Play .....................................................92
Random Play (Shuffle) ...................................92
Random Play (Shuffle All) ............................. 92
HDMI Device (Optional)
Pandora® internet radio (optional)
Listening to Pandora® ..................................... 93
iPhone Pandora
Bluetooth Pandora
“Thumbs” Feedback .......................................94
Searching for a Desired Station ...................... 94
Creating a New Station ................................... 94
QuickMix ........................................................94
Bookmarking a Desired Track or Artist .........95
®
......................................... 93
®
..................................... 93
LIMITED WARRANTY
Information
Product Software Update ................................95
About DVDs ...................................................95
List of Language Codes .................................. 97
List of Country Codes .....................................98
In Case of Difficulty .....................................100
If this Message Appears ...............................101
Specifications ................................................104
END USER LICENSE AGREEMENT
(Microsoft) ................................................105
7-EN
Operating Instructions
If there is anything in the manual about the operation of
PRECAUTIONS
IMPORTANT INFORMATION
PLEASE READ CAREFULLY BEFORE USING THIS
PRODUCT
This product is intended to provide turn by turn instructions to
get you to a desired destination. Please make certain that all
persons using this navigation system carefully read these
precautions and the following instructions fully.
• This product is not a substitute for your personal judgment. Any
route suggestions made by this navigation system may never
supersede any local traffic regulations or your personal judgment
and/or knowledge of safe driving practices. Do not follow route
suggestions if the navigation system instructs you to perform an
unsafe or illegal maneuver, places you in an unsafe situation, or
routes you into an area which you consider unsafe.
• Glance at the screen only when necessary and safe to do so. If
prolonged viewing of the screen is necessary, pull over in a safe
and legal manner and location.
• Do not input destinations, change settings, or access any
functions requiring a prolonged view of the monitor and/or
remote control while you are driving. Pull over in a safe and
legal manner and location before attempting to access the
system.
• Do not use the navigation system to route you to emergency
services. Not all locations of emergency services such as police
and fire stations, hospitals and clinics are contained in the
database. Please use your own judgment and ask for directions in
these situations.
• The map database used in the navigation system is the most
recent map data available at the time of production. Because of
changes in streets and neighborhoods, there may be situations
where the navigation system is not able to route you to your
desired destination. In these cases, use your own judgment.
• The map database is designed to provide you with route
suggestions and does not take into account the relative safety of a
suggested route or of factors which may affect the time required
to reach your destination. The system does not reflect road
closures or construction, road characteristics (i.e. type of road
surface, slope or grade, weight or height restrictions, etc.), traffic
congestion, weather conditions, or any other factors which may
affect the safety or timing of your driving experience. Use your
own personal judgment if the navigation system is unable to
provide you with an alternate route.
• There may be situations where the navigation system displays
the vehicle’s location erroneously. Use your own driving
judgment in this situation, taking into account current driving
conditions. Please be aware that in this situation the navigation
system should correct the vehicle’s position automatically.
However, there may be times where you may have to correct the
position yourself. If this is the case, pull over in a safe and legal
manner and location before attempting operation.
• Make certain that the volume level of the navigation system is set
to a level which still allows you to hear outside traffic and
emergency vehicles.
the navigation system which you are uncertain about,
please contact your local Alpine authorized navigation
dealer or Alpine at 1-888-NAV-HELP (1-888-628-4357)
before using the navigation system.
FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide more reasonable
protection against harmful interference in a residential
installation, and are more stringent than “outdoor” requirements.
Operation is subjected to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference
by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult an experienced radio/TV technician.
WARNING
Points to Observe for Safe Usage
• Read this manual carefully before using this disc and the system
components. They contain instructions on how to use this
product in a safe and effective manner. Alpine cannot be
responsible for problems resulting from failure to observe the
instructions in this manual.
• This manual uses various pictorial displays to show you how to
use this product safely and to alert you to potential dangers
resulting from improper connections and operation. Following
are the meanings of these pictorial displays. It is important to
fully understand the meanings of these pictorial displays in order
to use this manual and the system properly.
8-EN
WARNING
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
• Operation of the system while driving is dangerous. Users
should stop vehicle before operating the software.
• Road conditions and regulations take precedence over
information contained on the map display: observe actual
traffic restrictions and circumstances while driving.
• This software is designed for use exclusively in the
X008U/INE-W957HD. It cannot and may not be used in
conjunction with other hardware.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
INSTALL THE PRODUCT CORRECTLY SO THAT THE DRIVER
CANNOT WATCH TV/VIDEO UNLESS THE VEHICLE IS
STOPPED AND THE EMERGENCY BRAKE IS APPLIED.
It is dangerous (and illegal in many states) for the driver to watch
TV/Video while driving a vehicle. Installing this product
incorrectly enables the driver to watch TV/Video while driving.
This may cause a distraction, preventing the driver from looking
ahead, thus causing an accident. The driver or other people could be
severely injured.
DO NOT WATCH VIDEO WHILE DRIVING.
Watching the video may distract the driver from looking ahead of
the vehicle and cause an accident.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
KEEP SMALL OBJECTS SUCH AS SCREWS OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
DO NOT FOLLOW ROUTE SUGGESTIONS IF THE
NAVIGATION SYSTEM INSTRUCTS YOU TO PERFORM AN
UNSAFE OR ILLEGAL MANEUVER, OR PLACES YOU IN AN
UNSAFE SITUATION OR AREA.
This product is not a substitute for your personal judgment. Any
route suggestions by this system should never supersede any local
traffic regulations or your personal judgment or knowledge of safe
driving practice.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
KEEP FINGERS AWAY WHILE THE MOTORIZED FRONT
PANEL OR MOVING MONITOR IS IN MOTION.
Failure to do so may result in personal injury or damage to the
product.
9-EN
NOTICE
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
Be sure the temperature inside the vehicle is between +45°C
(+113°F) and 0°C (+32°F) before turning your unit on.
Moisture Condensation
You may notice the disc playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
New Discs
To prevent the disc from jamming, “Disc error” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Center Hole
Bumps
Center Hole
New Disc
Outside
(Bumps)
Damaged Disc
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
Maintenance
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
Never Attempt the Following
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“Disc error” will be displayed on your player if you insert a disc
incorrectly. If “Disc error” continues to be displayed even though
the disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
Irregular Shaped Discs
Be sure to use round shaped discs only for this unit and never use
any special shaped discs.
Use of special shaped discs may cause damage to the mechanism.
Installation Location
Make sure the X008U/INE-W957HD will not be installed in a
location subjected to:
• Direct sun and heat
• High humidity and water
• Excessive dust
• Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
INCORRECT CORRECT
Disc Cleaning
Fingerprints, dust, or soil on the surface of the disc could cause the
DVD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
10-EN
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause operational problems. We recommend
not using these accessories on discs played in Alpine DVD players.
Transparent Sheet Disc Stabilizer
Operation of some of the functions of this unit is very complex.
Because of this, it was deemed necessary to place these functions
into a special screen. This will restrict operation of these functions
to times when the vehicle is parked. This ensures the focus of the
driver’s attention will be on the road and not on the
X008U/INE-W957HD. This has been done for the safety of the
driver and passengers.
Setup operations cannot be made if the car is moving. The car must
be parked and the parking brake must be engaged for the procedure
described in the Owner’s Manual to be valid. The warning “If you
are driving, Please pull over before using this function.” will be
displayed if any attempts are made to perform these operations
while driving.
• The X008U/INE-W957HD draws minimal current even when its
power switch is turned off. If the switched power (ignition) lead of the
X008U/INE-W957HD is connected directly to the positive (+) post of
the vehicle’s battery, the battery may be discharged.
An SPST (Single-Pole, Single-Throw) switch (sold separately) can be
added to simplify this procedure. Then, you can simply place it in the
OFF position when you leave the vehicle. Turn the SPST switch back
ON before using the X008U/INE-W957HD. For connecting the SPST
switch, refer to the “Connection Diagram of SPST Switch (sold
separately)” (page 111). If the power (ignition) lead is unswitched, it
must be disconnected from the battery post should the vehicle be left
unused for an extended period of time.
Discs Playable on This Unit
Playable Discs
The discs listed below can be played on this unit.
Mark (logo) Recorded Content Disc size
DVD Video Audio + Video 12 cm*
Music CD Audio 12 cm
®
DivX
* Two-layer DVD disc compatible
The formatted discs listed below can be played on this unit.
CD Format
MP3 Format (“mp3”)
WMA Format (“wma”)
AAC Format (“aac”, “m4a”)
DVD Video Format
Audio + Video 12 cm
CD-R/
CD-RW
DVD-R/
DVD-RW
DVD+R/
DVD+RW
DivX Format (“avi”, “divx”)
• Discs that are not finalized cannot be played back.
11-EN
Discs that cannot be played
DVD-ROMs, DVD-RAMs, CD-ROMs (excluding MP3/WMA/
AAC files), photo CDs, etc.
DualDisc
This unit is not compatible with DualDisc.
Using a DualDisc may cause unit malfunction, and may cause disc
damage when the disc is inserted/ejected.
DVD region number (playable region number)
This DVD player will play back any disc whose region number is 1
(or All). DVDs with a region number other than those listed below,
cannot be played on this DVD player.
1
ALL
Using compact discs (CD/CD-R/CD-RW)
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
formatted audio files.
• Some of the following discs may not play on this unit:
Flawed discs, discs with fingerprints, discs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), discs
recorded under unstable conditions, discs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA/AAC files written in a format
compliant with this unit. For details, see pages 35 and 36.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
Tips for making your own discs
The X008U/INE-W957HD plays DVD Video, DivX®, Audio CD
and has a built in MP3/WMA/AAC decoder.
The following information is designed to help you create your own
music CDs (either Audio CD or MP3/WMA/AAC encoded CD-R/
RW files).
What is the difference between an Audio and MP3/WMA/AAC
CD?
An Audio CD is the same format as the commercial CDs you buy
in the store (also known as CD-DA). MP3 (MPEG Audio Layer 3)/
WMA (Windows Media Audio)/AAC (Advanced Audio Coding) is
a data file that uses a compression scheme to reduce the size of the
music file*.
* If the first session on a disc containing both CD-DA data and
MP3/WMA/AAC data is a CD-DA file, only CD-DA files will
be played.
Multisession CD-R/RW:
Once a recording has been stopped, this is considered one session.
If the disc is not closed (finalized), additional data may be added.
Once this additional data has been recorded, this becomes a
“multisession” CD.
Properly formatted MP3/WMA/AAC Discs:
Use ISO9660 formatting to insure proper playback. You may use
standard ISO naming Level 1 (8.3 DOS standard), Level 2
(32 characters) or Joliet (Windows or Macintosh long filenames)
file naming conventions*.
* Please consult the Owner’s manual for additional information.
On handling compact discs (CD/CD-R/CD-RW)
• Do not touch the surface.
• Do not expose the disc to direct sunlight.
• Do not affix stickers or labels.
• Clean the disc when it is dusty.
• Make sure that the disc is smooth and flat.
• Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time.
Never expose the disc to direct sunlight.
Heat and humidity may damage the disc and you may not be
able to play it again.
12-EN
Using DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs
• This unit is compatible with discs recorded in the standard
DVD-Video format.
• Note that discs not finalized (processed to enable to play on
playback-only DVD players) cannot be played on this DVD
player.
• Some discs may not play back, depending on the recording
device and disc format.
• Discs or files utilizing copy protection, may not be playable.
Some recording systems may not properly format copied files to
enable proper playback.
• In the following cases, the disc may not play on this unit:
discs recorded by certain DVD recorders, certain irregular discs,
flawed discs, dirty discs, when the pickup lens of this DVD
player is dirty, or when moisture condensation has occurred
inside the unit.
• Be sure to follow all cautions included with your DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs discs.
• Do not put stickers, seals, or tape on the label side of DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs.
• Compared to the regular discs, DVD-Rs/DVD-RWs/DVD+Rs/
DVD+RWs are more affected by heat, moisture, and direct
sunlight. If left in a car, etc., damage may occur and it might not
play on this unit.
• The operable temperature range for disc playback is as follows:
DVD-R/DVD-RW: -25 ~ +70°C
DVD+R/DVD+RW: +5 ~ +55°C
Disc terminology
Title
If titles are programmed for the DVD, these are the largest units of
division of the information recorded on the disc.
Chapter
Each Title may also be divided into smaller divisions, called
chapters. These can be specific scenes or musical selections.
Protecting the USB connector
• Only an iPod/iPhone or Flash memory can be connected to the
USB connector on this unit. Correct performance using other
USB products cannot be guaranteed.
• If the USB connector is used, be sure to use only the supplied
connector cable with the unit. A USB hub is not supported.
• Depending on the connected Flash memory device, the unit may
not function or some functions may not be performed.
• The audio file format that can be played back on the unit is
MP3/WMA/AAC.
• The video file format that can be played back on the unit is
®
.
DivX
• Artist/song name, etc., can be displayed. Certain, special
characters may not be correctly displayed.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.,
is lost while using this product.
On Handling Flash memory
• This unit can control a memory storage device that supports the
USB Mass Storage Class (MSC) protocol. Playable audio file
formats are MP3, WMA and AAC.
• Flash memory function is not guaranteed. Use Flash memory
according to the terms of agreement. Read the Flash memory
Owner’s Manual thoroughly.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
• Fix the Flash memory in a location where driver operation will
not be hindered.
• Flash memory may not function correctly at high or low
temperature.
• Use only certified Flash memory. Note that even certified Flash
memory, may not function correctly depending on its type or
state.
• Depending on the settings of the Flash memory type, memory
state or encoding software, the unit may not play back or display
properly.
• Files protected by DRM (Digital Rights Management), cannot be
played back on this unit. These include AAC formatted files
purchased from the iTunes Store and WMA or other files with
some form of copyright protection.
• Flash memory may take time to start playback. If there is a
particular file other than audio in the Flash memory, it may take
considerable time before the file is played back or searched.
• The unit can play back “mp3”, “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognized. The resulting
playback may contain noise that can damage speakers and/or
amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
13-EN
• This item incorporates copy protection technology that is
protected by U.S. patents and other intellectual property rights
of Rovi Corporation. Reverse engineering and disassembly are
prohibited.
• Manufactured under license from Dolby Laboratories. Dolby
and the double-D symbol are trademarks of Dolby Laboratories.
• Windows Media, and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• iPhone, iPod, iPod classic, iPod nano, iPod touch, and iTunes
are trademarks of Apple Inc., registered in the U.S. and other
countries.
• “Made for iPod,” and “Made for iPhone,” mean that an
electronic accessory has been designed to connect specifically to
iPod, or iPhone, respectively, and has been certified by the
developer to meet Apple performance standards. Apple is not
responsible for the operation of this device or its compliance
with safety and regulatory standards. Please note that the use of
this accessory with iPod, or iPhone may affect wireless
performance.
• Pandora, the Pandora logo, and the Pandora trade dress are
trademarks or registered trademarks of Pandora Media, Inc.,
used with permission. Pandora is currently available in the U.S.,
Australia and New Zealand.
• HD Radio Technology manufactured under license from iBiquity
Digital Corporation. U.S. and Foreign Patents. HD Radio™ and
the HD, HD Radio, and “Arc” logos are proprietary trademarks
of iBiquity Digital Corp.
• Sirius, XM and all related marks and logos are trademarks of
Sirius XM Radio Inc. All rights reserved.
• BlackBerry
trademarks, names and logos are the property of Research In
Motion Limited and are registered and/or used in the U.S. and
countries around the world. Used under license from Research
In Motion Limited.
• Android is a trademark of Google Inc.
• DivX
Rovi Corporation or its subsidiaries and are used under license.
• The Bluetooth
owned by the Bluetooth SIG, Inc. and any use of such marks by
Alpine Electronics, Inc. is under license.
• The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
• MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson. Supply of this product only
conveys a license for private,non-commercial use and does not
convey a license nor imply any right to use this product in any
commercial (i.e. revenue-generation) real time broadcasting
(terrestrial, satellite, cable and/or any other media),
broadcasting/streaming via internet, intranets and/or other
networks or in other electronic content distribution systems, such
as pay-audio or audio-on-demand applications. An independent
license for such use is required. For details, please visit
http://www.mp3licensing.com
©2014 NAVTEQ. All rights reserved.
Portions ©2014, Microsoft Corporation. All Rights Reserved.
®
, RIM®, Research In Motion® and related
®
, DivX Certified® and associated logos are trademarks of
®
word mark and logos are registered trademarks
14-EN
Features
Auto user setting change
With the X008U/INE-W957HD, you can register up to two users.
Each user can configure their own preferred settings.
By registering their respective Bluetooth devices to the unit, each user can be identified automatically.
USER1 USER2
USER2
USER1
• For details of how to register a Bluetooth device, refer to “User Registration” (page 21).
• If USER2 is recognized while USER1 is using the system, a confirmation message is displayed.
• If no Bluetooth device has been registered or if you want to switch users manually, touch the user tab key on the top of the screen.
• For details of which settings are affected by switching users, refer to “Settings When Switching Users” (page 27).
My Favorites
Up to 80 My Favorites can be registered as shortcut keys for each registered user.
Frequently used functions and handy functions can be customized for your convenience.
USER1 USER2
For details of how to register or add My Favorites, how to change the name, etc., refer to “Using My Favorites” (page 20).
15-EN
Easy sound setting by car type (i-Personalize)
This function lets you set the best audio environment for your car.
On the unit, select and set the car category/steering wheel position/speaker type and size/seat material.
For details of how to configure the settings, refer to “Car Specific Sound Setup” (page 23).
Display example when setting is completed
About Dual Screen
If you want to display the music playback screen while route guidance is displayed, etc., you can display the Navigation and Audio/Visual screens
simultaneously.
Navigation Full screen
Touch the Navigation screen portion.
or
Press the (MAP) button.
Dual Screen
Touch
Audio/Visual Full screen
Touch *
Press the button.
1
*
During video playback, [Dual Wide], [Dual Full] and [Full Screen] appear on the screen for selecting the screen size. For details, refer to
“Switching the Dual Screen Display” (page 29).
1
or
16-EN
Dual Screen Display Position
You can switch the Audio/Visual and Navigation screens using drag & drop.
To switch the screens, touch the middle of the Audio/Visual screen and drag it to the navigation screen. The screens will switch positions when you
remove your finger.
• Drag and drop the navigation screen will change to navigation full screen.
17-EN
Getting Started
Accessory List
• X008U/INE-W957HD............................................................1
• Power cable .........................................................................1
• Flush head screw (M5×8) (INE-W957HD only) ...................6
• Screw (M5×8) ......................................................................8
• GPS Antenna .......................................................................1
• Antenna mounting plate ......................................................1
• Cable clamp for antenna................................................1set
• AUX/PRE OUT cable ...........................................................1
• CAMERA/W.REMOTE cable ................................................1
• USB extension cable ...........................................................1
• Microphone..........................................................................1
• SD memory card..................................................................1
• Cushion (X008U only) ..........................................................1
• Mounting sleeve (INE-W957HD only) ..................................1
• Face plate (INE-W957HD only) ...........................................1
• Bracket key (INE-W957HD only) .........................................2
• Owner’s Manual ..............................................................1set
• To install the X008U, refer to the manual in the separately purchased
installation kit for each car type.
Location of Controls
Press and hold this button for at least 3 seconds to activate
the “Easy Sound Setup” mode (page 24). You can select
this menu to be displayed on the left or right of the screen.
For details, refer to “Setting the Easy Sound Setup Position”
(page 55).
(MAP) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 3 seconds to change
to Go Home route screen. If the Home is not set yet, it will
change to Home setting screen.
For details of navigation operations, refer to “Navigation
System OM” in the CD-ROM.
(PHONE) button
Recalls the Telephone Menu screen.
When a hands-free phone with Voice Recognition is
connected, press and hold for at least 3 seconds to switch
to the Voice Recognition mode.
/ button
Press to seek down/up station in radio mode or down/up
track, chapter, etc., in other audio/visual source.
c (Eject) button
Remote Sensor
Point the remote control transmitter towards the remote
sensor within a range of 2 meters.
Optional Remote Control Interface Box
This unit is operable using the vehicle’s secondary radio controls.
An Alpine Remote Control Interface Box (optional) is required. For
details, contact your Alpine dealer.
Controllable with Remote Control
This unit can be controlled with an optional Alpine remote control.
For details, consult your Alpine dealer. Point the optional remote
control transmitter at the remote control sensor.
• The illustration is for X008U.
RESET switch
The system of this unit is reset.
/ (My Favorites/iDataLink mode) button
The My Favorites screen for registered User1 or User2 is
displayed.
Press and hold this button for at least 3 seconds to switch to
iDataLink mode. You can check the car’s status, set the air
condition, etc,. when this unit is connected to the car’s
iDataLink module box.
/ (DOWN/UP) button
Press to adjust the volume.
MUTE/C button
Press to activate/deactivate the mute mode.
Press and hold this button for at least 3 seconds to turn the
power off.
/AUDIO button
Displays the Audio/Visual screen. If the Audio/Visual screen
is already displayed, changes the source.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in
bold (e.g. (My Favorites)). The buttons found on the
touch-screen display are shown in bold within brackets, [ ]
(e.g. []).
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last mode screen that
was displayed before the ignition key was turned off. For
example, if the unit is in radio mode when ignition is turned off,
it will remain in radio mode when ignition is turned back on.
2
Press and hold the C button for at least 3 seconds to
turn the power off.
• The unit can be turned on by pressing any button.
• The X008U/INE-W957HD is a precision device. Careful handling of
the unit should provide you with years of trouble-free operation.
18-EN
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
When the system is used for the first time, the
language selection menu is displayed. There are 24
languages to choose from. Touch [] or [] to
scroll the list, and then touch the desired language.
Inserting/Ejecting a Disc
Inserting the Disc
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [c Disc].
3
Insert the disc with the label side facing up.
SD memory
card slot*
Disc Slot
• You can also scroll through lists by touching the screen and
sliding your finger up and down.
2
Touch [OK].
The radio screen is displayed.
• Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press RESET switch with a ballpoint pen or similar
pointed object.
RESET switch
Insert the disc until it is automatically pulled into the unit.
The unit starts to play the disc.
* The SD memory card does not support Music/Video playback.
For details on how to use SD memory cards, refer to “Navigation
system OM” on the supplied CD-ROM.
• To remove the SD memory card, touch [ SD].
• Insert the SD memory card into the slot until it is locked.
If the SD memory card is not inserted properly, the monitor cannot be
closed.
Removing the Disc
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [c Disc].
The monitor will open. Then the disc is ejected.
When the disc has been ejected part way, take it out.
• Even if no disc is inserted, the monitor will open after touching
[c Disc].
3
Touch [Close], or press c (Eject).
• If the disc does not eject after touching [c Disc], press and hold
c (Eject) for at least 5 seconds.
• Do not apply shock to the monitor when it is open as it may result in
malfunction of the unit.
• The monitor will stop at the set tilt angle when closing.
CAUTION
Keep hands (or any other object) away from the monitor while it
is opening or closing to avoid damage or injury. The back of the
monitor tends to become very warm under normal operating
conditions. This is not a malfunction, but care should be taken to
avoid prolonged contact with it.
19-EN
Adjusting the Screen Viewing Angle
Adjust the screen’s angle for better visibility.
1
Press c (Eject).
The Open/Tilt screen is displayed.
2
Touch [Up] or [Down] of “Tilt” to adjust the
desired screen angle.
The screen angle can be adjusted in 5 stages.
3
Touch [] to return to the normal mode.
• The screen color will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
• If the voltage of the vehicle’s battery power is low, the screen may
blink when the screen angle is changed. This is normal and not a
malfunction.
Adjusting the Volume
Common Operations
Using My Favorites
Display example of My Favorites screen
Adjust the volume by pressing or .
Volume decreases/increases continuously by pressing and
holding or .
Volume: 0 - 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing MUTE again will bring the audio back to its
previous level.
User name: Displays the name of the user
My Favorites icon: Touching an icon on My Favorites
screen will switch to the screen for the selected
application
Add button: Use to add (register) My Favorites icons
(page 22)
Edit button: Use to edit My Favorites (page 22)
Camera button: Use to display the camera image
(page 23)
Notification List button: Use to display the Notification
List from Facebook in the connected Smartphone via
this unit (page 25)
i-Personalize button: Use to configure the i-Personalize
Setup (page 23)
20-EN
User Registration
You can register up to two users. Configure the User1 and User2
settings for each user.
1
Press the (My Favorites) button.
The My Favorites screen is displayed.
• You cannot access My Favorites screen while driving.
5
Touch [Search].
2
Touch [Start].
The user name input screen for the first user is displayed.
• After registering the first user, touch [USER2] to access to
USER2’s registration screen.
• Touching [Skip] registers the user name as “USER1” or
“USER2” and no Bluetooth device is registered. In this case,
the users will not be switched automatically.
• Touching [Cancel] or pressing the (My Favorites) button
returns to the original screen without registering a user.
3
Input the user name from the keypad and touch
[OK].
The system starts searching for Bluetooth devices.
When the search is completed, the Bluetooth Device List is
displayed.
• Set the Bluetooth setting on the preregistered Bluetooth device
side to [ON].
6
Touch a registered Bluetooth device and touch
[OK].
My Favorites screen for USER1 or USER2 is displayed.
• You can edit My Favorites icons.
For details of how to add, edit, delete or set My Favorites icons,
refer to “Adding My Favorites” (page 22).
7
Press the (My Favorites) button.
The My Favorites screen is exited and the display returns to
the original screen.
The Bluetooth Device Setup screen is displayed.
• Touch [ ] to edit the name.
For details of how to input characters from the keypad, refer to
“How to Input Characters and Numbers (Keypad)” (page 27).
4
Touch [Link], then touch [OK].
The Bluetooth Device List is displayed.
• The Bluetooth devices registered here are used to automatically
identify the user.
Also, a cellular phone can be used as a hands-free phone.
For details, see “Bluetooth Setting” (page 62).
• Touching [Do not Link] exits user registration without
registering a Bluetooth device.
21-EN
Setting My Favorites
Configure the My Favorites settings.
Press the (My Favorites) button.
My Favorites screen for USER1 is displayed.
• You cannot access My Favorites screen while driving.
• [ ] and [ ] are not available while driving.
• To configure My Favorites settings for USER2, touch [USER2]. The
My Favorites screen is displayed.
[SiriusXM] :
You can register presets No. 1-6 in SiriusXM1, SiriusXM2
and SiriusXM3.
Select presets No. 1-6 from SiriusXM1 preset/SiriusXM2
preset/SiriusXM3 preset.
[Disc]/[USB/iPod]/[iDataLink USB/iPod]/[HDMI]/[Pandora]/
[Bluetooth Pandora]/[iDataLink SiriusXM]/[AUX 1]/
[AUX 2]/[AUX 3]/[Bluetooth Audio]/[iDataLink Bluetooth
Audio] : You can switch directly to any of these audio
sources.
Editing My Favorites
You can delete names in My Favorites or change the layout.
Adding My Favorites
You can register up to 80 My Favorites for each user.
You cannot, however, register the same items (categories).
1
Touch [].
The addition items (categories) are displayed.
2
Touch the desired addition item (category).
Current position : Registers your current position in My Favorites
Current source
Favorites
• During Radio, CD, etc., main screen, you can directly register the
playing source to My Favorites by touching [ ]. The [ ] will not
display when the current source is already registered.
Navigation
search category in My Favorites
[Specific Place] : You can display the places registered in
My Favorites and set your destination.
Search for a place registered in My Favorites by Address/
Find Place/Address Book/History, then touch Add.
[Quick Place search] : Displays the address search keypad
[Help Nearby] : Displays the nearby search screen
[POI category] : Displays the selected POI category list
• For details of navigation operations, refer to “Navigation System
OM” in the CD-ROM.
Phone
My Favorites for shortcut dialing.
Select a name or phone number from the Phonebook list and touch
[Add].
• Touch [
• You can only select Phone when a mobile phone is connected.
Audio/Visual
[Radio] :
: Registers the audio source currently playing in My
: Registers the destination search category or nearby place
: Lets you register phone numbers stored in the phonebook in
b
] or [B] to switch phone numbers.
: Lets you switch directly to an audio source
HD Radio/RBDS: You can register presets No. 1-6 in FM1/
FM2/AM.
Select presets No. 1-6 from FM1 preset/FM2 preset/AM
preset.
Touch [].
“ ” appears and the mode switches to the Edit mode.
• Touching [Cancel] returns to the previous screen without executing
any changes.
Changing the name
1
Touch the icon you want to change
The Edit Text screen (Keypad) is displayed.
2
Enter the name and touch [OK]
The mode returns to the Edit mode.
3
Touch [OK].
The name is changed.
Deleting Icons
1
Touch “ ” by the icon you want to delete
The confirmation message is displayed.
2
Touch [OK].
The mode returns to the Edit mode.
3
Touch [OK].
My Favorites setup
You can change or delete the current registered user name or change the
registered phone number.
Touch [Setup].
The My Favorites Setup screen is displayed.
22-EN
Changing the User Name
1
Touch the [Name] of the current user.
The Input User Name screen (Keypad) is displayed.
2
Input the name and touch [OK].
The user name is changed.
• For details of how to input characters using the keypad, refer to
“How to Input Characters and Numbers (Keypad)” (page 27).
Changing a Bluetooth device
You can change the Bluetooth devices associated with the user.
1
Touch the [Phone].
The Bluetooth Device Setup screen is displayed.
2
Touch [Link], then touch [OK].
The Bluetooth Device list is displayed.
• The Bluetooth device set by User Registration is highlighted.
For detailed settings, touch [Search].
3
Select the device you want to change and touch
[OK].
The device is changed.
Deleting current Registered User
1
Touch [Delete].
The confirmation message is displayed.
2
Touch [OK].
• When the registered user is deleted, all the items affected by
switching users are returned to the default settings.
Displaying the Camera Image
When a separately purchased camera is connected to the system, you
can display the camera image.
Touch [] or [].
The camera image is displayed.
• For details of camera operations, refer to “Camera Operation
(Optional)” (page 77).
• When the front camera (direct camera) and rear camera or side
camera (AUX camera) are connected simultaneously, the screen for
selecting which camera image to display appears.
• Depending on the setting, the camera button may not be displayed.
For details, refer to “Setting the Camera Input” (page 64).
i-Personalize Setup
You can configure the audio settings by car type.
• You cannot access to i-Personalize screen while driving.
Touch [i-Personalize]*.
The i-Personalize Setup screen is displayed.
Changing the Layout
You can change the layout of the shortcut keys.
1
Drag and drop the icon to the desired location.
2
Touch [OK].
* This item cannot be adjusted when External Audio Processor is set to
On or BASS ENGINE SQ mode is selected, refer to “Setting the
External Audio Processor On/Off” (page 48) / “BASS ENGINE SQ”
mode (page 24).
Car Specific Sound Setup
You can set the best audio environment for your car.
1
Touch [Car Specific Sound Setup].
The vehicle type selection screen is displayed.
2
Touch the relevant Vehicle type.
• The selected Vehicle type is reflected in the “i-Personalize”
symbol on My Favorites screen.
3
Touch the position of the driver’s seat.
4
Touch the size of the front speaker.
5
Select whether or not there is a tweeter.
23-EN
6
Select the installation position of the rear speaker.
If you select “No rear speaker”, you cannot adjust the rear
speaker in Time Correction/X-Over in sound setup.
7
Select whether or not there is a subwoofer.
If you select “No”, you cannot adjust the subwoofer level/
subwoofer phase in sound setup.
• If Preset3 was already saved for Time Correction/X-Over/Parametric
EQ, the data will be overwritten.
Easy Sound Setup mode/BASS ENGINE SQ mode
8
Select the material of the car seats.
The settings confirmation screen is displayed.
• If the car seats are made of both leather and fabric, select
[Half leather].
9
Check the settings and touch [OK].
• If Preset3 was already saved for Time Correction/X-Over/Parametric
EQ, the data will be overwritten.
• The Easy sound settings are reflected in the following Audio Setup
items.
Setting the MX (Media Xpander)
- Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (Time Correction)
Adjusting the Crossover Settings (X-Over) (only when
Subwoofer is set to [On])
The Equalizer Presets settings are disabled.
Downloaded Sound Settings
Using a Flash memory device, the sound settings downloaded from the
ALPINE website can be used to configure Time Correction, X-Over and
Parametric EQ settings.
Setting item: Downloaded Sound Settings
The file name of download data shall be
“A_U*****.MP3”.
Extender (fixed)
Identifier (alphabet or number
5 letters maximum)
Header (fixed)
During normal source play mode, you can activate Easy Sound Setup
mode by pressing and holding /AUDIO for at least 3 seconds. Fader/
Balance/Bass level/Treble level/Subwoofer level and BASS ENGINE
SQ can be adjusted in this mode.
Easy Sound Setup mode
Adjust the Fader/Balance/Bass level/Treble level.
Display example for Easy Sound Setup screen
• You can choose to display this menu on the left or right of the screen.
For details, refer to “Setting the Easy Sound Setup Position” on
page 55.
• Subwoofer level is not adjustable when SubW. is Off. (Page 49)
• The Fader/Balance setting is reflected to “Setting the Balance/
Fader” (page 49).
• In BASS ENGINE SQ mode, touch [BASS ENGINE SQ] to switch to
Easy Sound Setup screen.
BASS ENGINE SQ mode
With the BASS ENGINE SQ function on this unit, several parameters
affecting Bass performance are adjusted simultaneously. The Bass Level
adjustment varies these parameters uniformly for optimum Bass effect
at different levels.
Touch [BASS ENGINE SQ] to switch to BASS ENGINE
SQ mode.
Display example for BASS ENGINE SQ screen
• Save the setting data in the root folder.
• For details about procedures of download, see ALPINE’s web site.
1
Touch [Downloaded Sound Settings].
Setting data files are displayed in a list with a maximum of 5
items.
2
Touch the desired file.
3
Touch [OK].
The downloaded setting values are set as the Time
Correction/X-Over/Parametric EQ settings, and at the same
time saved as Preset3, respectively.
• When no downloaded file is detected in the connected Flash memory,
the “Downloaded Sound Settings” function is not available.
24-EN
Display the current BASS ENGINE SQ parameter.
BASS ENGINE SQ:
Adjust the relevant Bass parameters uniformly and
automatically.
Easy Sound Setup:
Adjust each audio effect setting separately and manually.
• You can set this item via TuneIt App on a Smartphone. Refer to
“Adjusting the sound via the Smartphone” on page 25.
Applying TuneIt
Select the Desired BASS ENGINE Type
You can select your preferable BASS ENGINE type within Standard
(Initial setting)/Punch/Rich/Mid Bass/Low Bass.
Adjusting the BASS ENGINE Level
With BASS ENGINE SQ ON, adjusting the Bass Level uniformly
effects various sound parameters for optimum Bass effect.
• Adjustable only when Defeat is Off.
• The Bass parameters affected contain Bass Level, Treble Level, EQ
PRESETS, Parametric EQ, SUBWOOFER (when set this item via
TuneIt App), Subwoofer Level, Media Xpander, X-Over, Car Specific
Sound Setup and Download Sound Setting. These items are set
automatically in BASS ENGINE SQ mode and cannot be adjusted
separately.
• From Level 0 to Level 6, the effect of BASS ENGINE SQ increases
level by level.
About Setup when the external power amplifier is connected.
In order to optimize the BASS ENGINE SQ, we recommend the
following power amplifier setup.
After setting up, you can adjust the BASS ENGINE SQ Level
according to the music.
1 Set gain of the power amplifier to “MIN”.
2 Set the Crossover Mode Sector switch to “OFF”.
3 Set the BASS ENGINE SQ of this unit to “ON”, and the
BASS ENGINE Level to “+3”.
4 Play a song of the genre you frequently listen to, and
adjust gain of the power amplifier.
Access to iDataLink Mode
When the unit is connected to the car’s equipped iDataLink module, you
can check the car’s status, set the air conditioning, etc.
1
Press and hold for at least 2 seconds to activate
iDataLink mode.
2
Touch the desired tag on the top of the screen.
3
Adjust or confirm the item/information accordingly.
This unit’s sound tuning is programmable from a connected
Smartphone. It is also possible to download specific parameters for
certain vehicles from Alpine’s TuneIt database stored in the Cloud.
Using the TuneIt App, customized parameters can also be uploaded for
others to share and rate.
Through this unit, it is also possible to receive and respond to
information from Alpine’s Social Network Service (SNS) available
through the connected Smartphone.
The installed TuneIt App should be launched on the Smartphone before
connection to the head unit.
TuneIt, is downloadable from Apple’s App Store; the Android user can
download it from Google Play. For details, consult your Alpine dealer.
Before these operations, set TuneIt to USB (iPhone) or Bluetooth
(Android) depending on the connected Smartphone. For details, refer to
“Setting the Communication Mode with a Smartphone” on page 61.
• The application program and related specifications and data may be
deleted or terminated without notice.
• Some TuneIt functions may not be available if the Smartphone is not
in a service area or receives no signal.
Adjusting the sound via the Smartphone
After setting the above procedure, you can adjust the unit’s sound
function on the Smartphone.
1
Make sure the unit is powered on.
2
Launch the TuneIt App on the Smartphone. Adjust
the unit’s sound accordingly on the Smartphone.
• You cannot adjust the sound via a Smartphone when External Audio
Processor is set to On. Refer to “Setting the External Audio
Processor On/Off” (page 48).
• Volume level cannot be adjusted via the Smartphone.
• The setting cannot be done on both the Smartphone and this unit at
the same time. While the sound function of this unit is set via the
Smartphone, sound function settings on X008U/INE-W957HD will
be displayed as “Sound APP Connected”.
• In some situations, such as the unit is powered off or during a call,
etc., sound setting cannot be done via the Smartphone.
• This function may not be available depending on the paired
Smartphone.
• Please obey all local traffic laws while using this function.
Display example for the air conditioning screen
• Depending on the car type, some functions may not be available even
though the iDataLink module is connected.
• You can set the iDataLink mode’s initial screen. For details, refer to
“Setting the Default Vehicle Screen” (page 44).
Facebook Notification Function
Some functions may be available in a future version of TuneIt.
• Depending on the paired Smartphone, the following functions may
not be available even though the TuneIt version is updated.
• Text information and Facebook screen are not displayed while
driving.
Receiving Notification
When the Smartphone connected to this unit receives notification from
Facebook, the incoming message pops up (depending on the TuneIt
settings on the phone).
25-EN
Display example for Notification incoming screen
Poster’s picture: Display poster’s picture. (Provided from
TuneIt App on Smartphone, displayed with a default
image when invalid.) Touch here to switch to Facebook
screen.
Poster’s name: Display poster’s name. (Provided from
TuneIt App on Smartphone, not displayed when invalid.)
Touching here can also switch to Facebook screen.
Notification List button: Touch to switch to Notification
List screen.
Text To Speech play/stop button: Touch to play received
notification (Depending on the status, operation may not
be available). During play mode, touch [] to stop play.
Like button: For “Like” operation. (Valid when Wall Posts
or Comments is received)
Close button: Close the notification screen.
Touch the desired button to operate.
• Touching Audio/Video screen will close the notification screen.
• While you play a Notification by TTS during iPod video mode, the
TTS volume is the same as iPod video source.
And adjust the TTS volume will reflect to iPod video source.
• While you play a Notification by TTS during iPod video mode, the
iPod VIDEO extension cable should be connected correctly.
Otherwise, you cannot hear the TTS. On how to connect an iPod/
iPhone, refer to “Connection of an iPod/iPhone” (page 115).
• The TTS volume is output via the car’s front right and left speakers.
Displaying Facebook Screen
During Notification incoming or Notification List screen, you can
switch to Facebook screen.
Display example for Facebook screen
Touch Poster’s picture or Poster’s name to switch to
Facebook screen.
The details information of Notification is displayed.
• Touch [ ] to return to previous screen.
• Depending on the status, contents of message and photo may not be
displayed.
• A new received Notification prompt will last for 15 seconds. If there
is no operation within 15 seconds, the unit will return to normal
mode.
• In some situations, such as the unit is powered off or during a call,
etc., Notification of the Smartphone will not be prompted by this unit.
Displaying Notification List
You can view the received Notification from Facebook in the connected
Smartphone via this unit.
Display example for Notification List screen
1
Press the (My Favorites) button.
My Favorites screen for User1 or User2 is displayed.
2
Touch [ ] (Notification List icon).
The received Notification will be displayed according to
when it was posted.
3
Then operate it the same as “Receiving
Notification”.
• Touch [ ALL]/[ ALL] to play/stop all Notifications.
• Touch [ ] to return to My Favorites screen.
• You can also access to Notification List screen by touching [ ] on
Notification incoming screen. However, [ ] will not be displayed
in Notification List.
• Depending on the status, some functions may not be available.
• When there is no Notification, “No Notifications.” will be displayed.
• The displayable amount of the Notification list depends on the
connected Smartphone.
A part content of message
Poster’s photo
Close button: Close the Facebook screen.
26-EN
Settings When Switching Users
The functions/settings that are affected when switching users are as
shown below.
Item Ref. page
User Registration 21
My Favorites
HD Radio/RBDS Displaying Radio Text 33
General Setup
Sound Setup
Source Setup
Hands-Free
Phone Control
Camera
Operation
BASS ENGINE
SQ mode
1
Except POI category/i-Personalize Setup
*
2
The display pattern can be set when a camera equipped with a switch
*
function on the Camera screen is connected.
Setting My Favorites*
Displaying the Camera Image*
Setting Top banner and Bottom banner
Display
Switching the Display Color 45
Turning Subwoofer ON/OFF 49
Adjusting the Subwoofer Level 49
Setting the Slide Source change 55
Setting the Easy Sound Setup Position 55
Assigning as a Short Cut Dialing
Number
Redial Function 69
Phone Book Function 71
Switching the Image Pattern for the
Rear Camera*
Switching the Image Pattern for the
Front Camera*
Guide Display ON/OFF Setting 77, 80
Adjusting the Caution Display Location 77, 80
Select the desired BASS ENGINE
Ty pe
Adjusting the BASS ENGINE Level 25
1
2
2
2
22
23
44
72
77
80
25
How to Input Characters and Numbers (Keypad)
Character input is required for user registration, place searches, etc.
The displayed screens and procedures may vary slightly depending on
the function used, but the basic input method is the same.
Input screen area.
(Delete)
Returns to the previous character and erases it.
Touching here for more than 2 seconds will erase all
input characters.
Character keypad
Special character selector switch
Character keypad Special character keypad
Symbol keypad Character keypad
(Space)
Input number is confirmed.
Items whose settings are affected when switching
registered users, are indicated by
“ ” in this manual.
Example:
“Source Setup Operation” (page 56).
27-EN
Top banner and Bottom banner Fade Out Setting
When “Top/Bottom Banner Fade Out” is set to ON, the Top banner and
Bottom banner on the Audio/Visual Playback screen fade out after
5 seconds if no operation is performed. To display the keys again, touch
the middle of the screen.
Top banner
Bottom banner
Switching Sources
During audio/visual playback, press the button or touch a source
button in the top banner to switch to the desired source.
Switching Sources Using the Button
During audio/visual playback, press the button repeatedly to switch
to the desired source.
1
Radio Disc*
HDMI*
iDataLink SiriusXM*
AUX 3*
Radio…
1
When no disc is inserted or no Flash memory/iPod/HDMI device/
*
Smartphone/SiriusXM Tuner/Bluetooth compatible device is
connected, this option is not available.
2
Displayed only when the unit is connected to the car’s iDataLink
*
module and the iDataLink related setting item is set to “OEM” or
“Both” on the unit. (Page 43)
3
When Bluetooth Pandora is set to “Off”, this option is not available.
*
(Page 61)
4
When AUX 1 In is set to “Off”, this option is not available. (Page 60)
*
5
When AUX 3 Source Select is set to “iPod Video”, this option is not
*
available. (Page 60)
Switching Sources Using the Top banner
Touch the source button for the Top banner at the top of the Audio/
Visual Playback screen and select the desired source.
USB/iPod*1 iDataLink USB/iPod*2
1
Pandora*1 Bluetooth Pandora*3 SiriusXM*1
5
Bluetooth Audio*1 iDataLink Bluetooth Audio*2
2
AUX 1*4 AUX 2*4
Source button
• For details of how to set Top/Bottom Banner Fade Out, refer to
“Setting Top banner and Bottom banner Display” (page 44).
Top banner
Swipe here
to switch
source
If the source button is hidden, touch [b] [B].
• When “Slide Source Change” (page 55) is set to “On”, you can
switch sources by swiping from the middle of the marked area from
right to left or from left to right.
• For USB/iPod / SiriusXM / Bluetooth Audio, you can select the
source from this unit or from iDataLink module. Refer to “Setting the
Source Category” (page 43).
• The Source display order can be changed. For details, refer to
“Customizing the Source Banner” (page 55).
Screen Off Function
This mode is useful if you feel the unit’s display is too bright at night.
To cancel Screen OFF mode, touch the screen or press any button.
• Screen OFF mode is canceled when the power or ACC is turned off.
• When the gear lever is shifted to the reverse (R) position while the
rear camera is connected, the rear camera im age is displayed.
• When a call is received while a Bluetooth device is connected, the
incoming call screen is displayed.
28-EN
Rear Entertainment Function
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
1
Press the button.
2
Touch [Rear]* of Top banner.
Rear source Select display appears.
* Displayed only when Rear Seat Entertainment (RSE) is On
(page 60).
• Touching [ ] on the Rear selection screen will change to the main
source screen.
3
Touch the desired visual source (such as auxiliary
input, built-in DVD) to select.
• To uc h [OFF] to cancel the rear entertainment function.
• When the “Setting the AUX Mode” (page 60) is set to Off, the
auxiliary source is not displayed.
• Depending on the status, some Rear source items may not be
available in some case. (For example, when there is no DVD disc
inserted on this unit, you cannot set “Disc” as Rear source.)
• Touch [AUTO] to set the rear source the same as the X008U/
INE-W957HD’s playing visual source.
• When iPhone Pandora
you cannot select iPod Video or enjoy iPod Video on rear monitor.
• Select iPod audio on X008U/INE-W957HD may impact the iPod
video playing on the rear monitor.
• You cannot make the AUX 1 and AUX 2 to play on the main unit and
rear monitor at the same time.
®
source is selected on X008U/INE-W957HD,
Full Screen
Touch operation
You can operate the system by using the touch panel on the screen.
• Be sure to touch the onscreen button lightly with the pad of your
finger to protect the display.
• If you touch a button and there is no reaction, remove your finger
from the display once, and try again.
• Onscreen buttons that cannot be operated appear dull in color.
Common onscreen buttons
[]:Returns to the previous screen. Depending on the
function, this button may cancel the operations
performed on the screen.
[]:Closes the window.
Switching the Dual Screen Display
When you touch [MODE] on the dual screen during video playback,
the screen size selection message is displayed.
Dual Wide (Initial setting)
Dual Full
Selecting an Item in a List
To scroll through a list, perform the following operations.
Touch the screen and slide your finger up and down.
The screen will scroll along with your finger movement.
Also, you can touch [] and [].
• After touching the screen, move your finger away from the screen
before dragging and that item will be selected.
29-EN
About the Indicator Display
The Indicator Bar at the bottom of the screen displays various types of
information, like the current time.
The display will differ depending on the source. For
details, refer to the display example of each source.
Lights up when connected to a Bluetooth compatible
device. (Does not display when connection is set to
OFF.)
: Bluetooth connection to audio device
: Bluetooth connection to Hands Free Phone
Blinks while reconnecting.
Indicates the battery level of the connected Bluetooth
device.
Battery
Level
Icon
This may not be displayed depending on the connected
Bluetooth device.
Indicates the signal strength level of the connected
Bluetooth compatible device.
Displayed when Bluetooth setting is ON.
No Battery Level 1 Level 2 Level 3
0123No Service
The clock display
You can switch between the 12 hour display and 24 hour
display options.
For details of the clock display settings, refer to “Navigation
System OM” in the CD-ROM.
30-EN
Loading...