Alpine INE-W92xR-Tru Installation Manual

INE-W92xR-Tru

Installation Manual

Trucking Software for

INE-W920R / INE-W925R / INE-W928R

August 2012, Version 1.0

Installation instructions for INE-W920R / INE-W925R / INE-W928R*:

1) Insert the Micro SD card into the card slot below the detachable face plate.
*INE-W928R: Insert the Micro SD card adapter including the Micro SD card
into the SD card slot located below the display.

2) Power the unit on. Contents will be copied.
Caution: The Micro SD card MUST remain in the unit!

3) Make sure to insert the Micro SD card BEFORE you access
https://alpine.naviextras.com for map and content updates!

After the Micro SD card is inserted and contents copied trucking specific map
and content updates will be available at https://alpine.naviextras.com.

How to adjust truck specific settings in the Navigation Software
of INE-W920R / INE-W925R / INE-W928R:

1) Press hard key “Navigation” and touch the “Settings” symbol
from the Navigation Main Menu.

2) Touch “Route Settings”, and then touch “Vehicle”.

3) Scroll down and select “Default Lorry”.

4) Touch the “Settings” symbol in the “Default Lorry” selection bar to access
the settings menus for the trucking feature allowing you to customize and
adjust values applicable to your vehicle.