"Schematic Diagram (ECU P.W.Board / ASSY,FPC SHEET SW) cannot use a reference function"
INA-N333RS/
(INA-N333RS)
TO ALPINE Home Page
<Cautions for Safe Repair Work>
r
s
.
- 2 -
The following cautions will prevent accidents in the workplace and will ensure safe products.
*The symbols indicate caution is needed to prevent injuries and damage to property.
The symbols and their meanings follow.
Warning
Caution
*The following symbols indicate two levels of cautions.
When you see this symbol, you have to be very careful.
When you see this symbol, you have to follow the instructions there.
If you ignore this symbol and handle the product incorrectly or unsafely,
serious injury or death may result.
If you ignore this symbol and handle the product incorrectly or unsafely,
injury or only material damage may result.
Warning
Do not look squarely into the laser light
coming from the pickup.
You may loose you sight.Use of an incorrect fuse may result in a fire.
Caution
Do not allow wiring to be caught in the Battery Caution
screw/chassis.Use the designated battery.
If wiring is caught in the screw/chassis, it mayConfirm the correct polarity and seat of the battery.
cause a short circuit, resulting in a fire.An incorrect battery or an improperly connected or
Fuse Caution
Always use a designated fuse.
seated battery may result in a fire.
High Temperature CautionDesignated Parts Caution
Touching the heat sink may cause severe burns.Look up the part list and ensure that only
designated parts are used to prevent problems or
accidents.
Reverse Power Supply Connections o
Misconnections Caution
Reverse power supply connections orprevent problems with ignition/breakdown.
misconnections may cause ignition problems and
smoke may result.
Soldering CautionWear Glove
Hot solder from solder splash may cause severe Wear gloves to prevent electrical shocks or injury
burns.from the end face of the metal.
For the FDA laser standard, the following CAUTION label is stuck on each product
Please be careful for repair.
CAUTION-Laser radiation when open, DO NOT STARE INTO BEAM
Wiring Caution
Ensure that the wiring is correct when rewiring to
Contents
- 3 -
INA-N333RS/INA-N333RRS
Packing Assembly Parts List
Packing Method View
System Connection
Specifications
I/O Interface
5 to 7
8 , 9
10 to 16
Extension Cable
Adjustment Procedures
Block Diagram
Parts Layout on P.W.Boards and Wiring Diagram
Schematic Diagram
Terminal Voltage of IC/ TR
18 , 19
20, 21
22 to 26
27 to 40
41 to 48
4
4
17
Description of IC Terminal
Exploded View (Cabinet)
Exploded View (DVD Deck Mechanism) (DV33M01B)
49 to 55
56 , 57
58
NOTE : Due to continuing product improvement, specifications and designs are subject to
change without notice.
To amplifier or equalizer
To the instrument cluster
illumination lead
To power antenna
Ignition Key
Battery
To the vehicle speed pulse line
CD Changer
(Ai-NET)
(Sold Separately)
Speakers
18
Ai-NET
NORMEQ/DIV
24
19
22
20
17
21
16
(Green)
(Green/Black)
(White)
(White/Black)
(Gray/Black)
(Gray)
(Violet/Black)
(Violet)
-
25
26
27
28
29
30
31
32
22
22
Amplifier
Amplifier
Amplifier
Rear Left
Front Left
Speakers
Front Right
Rear Right
Front
Rear
Subwoofer
23
INA-N333RS/INA-N333RRS
- 6 -
TO CONTENTS
1
Antenna Receptacle
Connect to the supplied ISO antenna converter plug.
2
king Brak
Par
Connect this lead to the power supply side of the parking
brake switch to transmit the parking brake status signals to
the INA-N333RR.
3
Audio Interrupt In Lead (Pink/Blac
Connect this lead to the Audio Interface output of a cellular
phone which pro
received.
4
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
5
Dimmer Lead (Or
This lead may be connected to the vehicle's instrument
cluster illumination lead. This will enable the vehicle's
dimmer control to dim the backlighting of the unit.
6
Switched Power
Connect this lead to an open terminal on the vehicle's fuse
box or another unused power source which provides (+) 12V
only when the ignition is turned on or in the accessory
position.
7
Ground Lead (Black)
Connect this lead to a good chassis gr
Mak
e sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
8
wer Antenna Lead (Blue)
Po
Connect this lead to the +B terminal of your po
if applicable.
e Lead (Yello
vides ground shorting w
ange)
Lead (Ignition) (Red)
w/Blue)
k)
hen a call is
ound on the v
wer antenna,
NOTE
This lead should be used only for controlling the vehicle's power
antenna. Do not use this lead to turn on an amplif
processor,
9
Batter
Connect this lead to the positive
battery.
10
Fuse Holder (10A)
11
ISO Power Supply Connector
Speed Sensor (Green/White)
12
Connect to
Improper connection of the speed pulse line may cause
important safety fe
brakes or air bags). Such failures may result in an accident
and loss of life. We strongly recommend that the installation
be performed by a tr
* If the connectors of the vehicle are not ISO type or they
etc.
w)
y Lead (Y
are ISO type but not equipped with the speed sensor
terminal on the v
supplied speed sensor auxiliary cable to connect to the
speed sensor cable of the vehicle.
ello
VSS (Digital or Analog 0V - 3V)
atures of the v
ained
ehicle side ISO connector
(+) post of the v
ehic
ized Alpine dealer.
, author
le to fail (suc
ier or a signal
ehicle's
, use the
ehic
h as the
le.
Remote Control Interf
13
To remote control interf
14
To RDS-TMC Receiv
ace Connector
ace box.
er (Optional)
NOTE
To connect an
dealer.
15
GPS Antenna (Included)
Power Supply Connector
16
Ai-NET Connector
17
Connect this to the output or input connector of other
product (CD chang
NET.
Ai-
System Switch
18
When connecting a pr
switch in the EQ/DIV position.
connected
Alpine RDS-TMC Recei
er
, Equalizer
ocessor using
, leave the
switch
in the NORM position.
consult your
ver,
.) equipped with
, etc
Ai-NET
When no de
Alpine
, place this
vice is
NOTE
Be sur
e to turn the power of
h position.
switc
Front Output RCA Connectors
19
RED is right and WHITE is left.
Rear Output RCA Connectors
20
-
RED is right and WHITE is left.
21
Subwoofer Output RCA Connectors
RED is right and WHITE is left.
22
RCA Extension Cab
23
Ai-NET Cable (Included with CD Changer)
24
ISO Connector (Speaker Output)
25
Left Rear (+) Speak
26
Left Rear (
27
Left Front (+) Speak
28
Left F
29
Right F
Right F
30
Right Rear (–) Speak
31
Right Rear (+) Speaker Output Lead (Violet)
32
–) Speaker Output Lead (Green/Black)
ront (–) Speaker Output Lead (White/Blac
ront (–) Speaker Output Lead (Gra
ront (+) Speak
f to the unit befor
le (Sold Separately)
er Output Lead (Green)
er Output Lead (White)
er Output Lead (Gra
er Output Lead (Violet/Blac
e c
y/Blac
y)
hang
ing the
k)
k)
k)
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at
• Keep
• Connect the gr
• If you add an optional noise suppressor
suppressors, contact them for further information.
• Y
the battery power
ound lead securely to a bare metal spot (remove any paint, dirt or gr
our Alpine dealer knows best a
leads as far
least 10 cm away
away from other leads as possible.
, connect it as far away
bout noise prevention measures so consult your dealer for
from the car harness.
r
from the unit as possible.
ease if necessary) of the car c
hassis.
Alpine dealer carries various noise
Y
our
further information.
<Connection with optional RDS-TMC Receiver Box TMC-001P>
- 7 -
TO CONTENTS
<INA-N333RS/INA-N333RRS>
INA-N333RS/INA-N333RRS
TMC-001P
Attached
antenna
ACC (Ignition) (Red)
Battery lead (Yellow)
Ground (Black)
TMC-001P
TMC Receiver Box
(Sold Separately)
For further information about the connection and
installation of TMC-001P, refer to the owner's manual of
TMC-001P.
NOTE
* Matching the optional Navig
to part of
the b
uilt-in
ation Disc (NVD-T334) with the RDS-TMC Receiver Bo
TMC tuner.
Ignition Key
Battery
x (TMC-001P) may cause function failure
INA-N333RS/INA-N333RRS
- 8 -
TO CONTENTS
Specifications
<FM RADIO>
Intermediate Frequency ......................................................................................................................... 10.7±0.1MHz
Frequency Range ............................................................................................................................... 87.5 to 108MHz
Usable Sensitivity (Mono, 30dB S/N, at 98.1MHz) .......................................................................................... 20.2dBf
Intermediate Frequency ....................................................................................................................... 1st. : 10.7MHz
2nd. : 450kHz
Frequency Range .............................................................................................................................. 531 to 1,602kHz
Usable Sensitivity (20dB S/N, at 999kHz) ........................................................................................................... 36dB
S/N Ratio (at 999kHz) ......................................................................................................................................... 44dB
Frequency Response (Ref. 400Hz, at 999kHz) .................................................................................. 100Hz : -3±4dB
2.5kHz : -5+3, -5dB
<LW RADIO>
Intermediate Frequency ....................................................................................................................... 1st. : 10.7MHz
2nd. : 450kHz
Frequency Range ................................................................................................................................. 153 to 281kHz
Usable Sensitivity (20dB S/N, at 216kHz) ........................................................................................................... 42dB
S/N Ratio (at 216kHz) ......................................................................................................................................... 44dB
Frequency Response (TCD-782, Ref. 997Hz) ....................................................................................... 17Hz : 0±3dB
127Hz : 0±2dB
10.007kHz : 0±2dB
19.997kHz : 0±4dB
S/N Ratio (TCD-782) ........................................................................................................................................... 80dB
Laser Power .................................................................................................................................................. CLASS II
Back-Up Current .................................................................................................................................................. 5mA
Dimensions (W x H x D) ................................................................................................. Chassis : 178 x 50 x 158mm