Alpine i207-WRA Installation Manual

Jeep Wrangler

i207-WRA Restyle Installation Manual

 Model: Wrangler  Model Year: 2007-2017

Jeep Wrangler

WRANGLER  1/16

Jeep

* The speciﬁed vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is

not guaranteed if the manufacturer has made production changes to the listed vehicles above.

Warning: Before you begin wiring, remove the ground wire from the negative

Model Year

Wrangler 2007-2017

terminal of the battery. Failing to do so can lead to electric shock, injury or damage to equipment.

Introduction

Congratulations on purchasing the i207-WRA. This installation manual is designed to take you through the

step-by-step installation of the i207-WRA into a 2007 and 2017 Jeep Wrangler. Please familiarize yourself with the owners manual and if you still have additional questions please call 1-800-TECH-101.

Note:

Design and speciﬁcations are subject to change without notice for improvement.

To Ensure Safe Use, Always Follow These Precautions

The installation of this product requires specialized skills and experience. We recommend that you have the

product installed by an Alpine authorized dealer.

Before you use this product, be sure to carefully read this installation manual and the separate user's manual

so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as a result of failure to follow the instructions in the manuals.

This manual includes a number of symbols that are intended to help you use the product safely, to prevent

harm to you and others, and to protect against damage to property. These symbols and their meanings are listed below. Make sure you fully understand these symbols before you begin reading the main text.

Explanations of Injury and Damage That May Result from Incorrect Use

Warning

Caution

Ignoring the content marked by this indication and using the product incorrectly is expected to lead to death or serious injury.

Ignoring the content marked by this indication and using the product incorrectly is only expected to lead to injury or property damage.

Types of Precautions

Forbidden

Mandatory

Forbidden

Mandatory

Forbidden

Jeep Wrangler

WRANGLER  2/16

Indicates actions that are forbidden (must not be performed)

Indicates that disassembly is forbidden.

Indicates actions that are mandatory (must be performed)

Marks content that should receive your full attention.

Warning

Do not disassemble or modify the product. Doing so could lead to an accident, fire, or electric shock.

Store screws and other small objects where small children cannot reach them. If one of these small objects is swallowed, consult with a doctor immediately.

When replacing fuses, be sure to use fuses with the specified current rating. Failing to do so could lead to an accident or fire.

Only connect the product to a 12 VDC negative ground car. Failing to do so could lead to an accident or fire.

Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so could lead to electric shock or injury.

Do not cut the insulation on a cord and take power from another device. Doing so could lead to fire or electric shock.

Do not install the product in a location where it will obstruct the driver’s forward view; interfere with the operation of the steering wheel, gearshift, or the like; or pose a threat to passengers. Doing so could lead to an accident or injury.

When making a hole in the vehicle body, be careful to avoid damaging pipes, the fuel tank, electrical wiring, and the like. This kind of damage could lead to an accident or fire.

Jeep Wrangler

Forbidden

WRANGLER  3/16

When installing and grounding the product, do not use any of the bolts or nuts of the steering wheel, brakes, fuel tank, or the like. Doing so could make the brakes stop working or lead to fire.

Do not install the product near the passenger-side airbag. Doing so could interfere with the operation of the airbag and lead to an accident or injury.

Bundle cords so that they don’t interfere with driving. Wrapping cords around the steering wheel, gearshift, brake pedal, or the like, could lead to an accident or damage equipment.

Caution

Connect the product properly according to the instructions. Failing to do so could lead to fire or an accident.

Do not sandwich cords between the seat railing or allow them to touch protrusions. Resulting breaks or shorts could lead to electric shock or fire.

Do not block vents or heat sinks. Doing so could lead to fire or damage equipment.

Use the accessories according to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment.

Do not install the product where it may be exposed to water or in a place with high levels of humidity or dust. Doing so could lead to fire or damage equipment.

The installation and wiring of this product requires specialized skills and experience. Have the product installed by an Alpine authorized dealer.

Tools Required

Panel Removing Tool 7mm Sockets #2 Phillips Screwdriver

Wire Cutters Extension Ratchet

T20 Torx

Jeep Wrangler

WRANGLER  4/16

Accessory List

Installation Kit Parts

Rear Support Bracket

(only for 2011-2017)

Side Mounting Brackets Add-on Microphone

Accessory List

Head Unit Box Parts (i207-WRA)

Jeep Wrangler

WRANGLER  5/16

iLX-207 Head Unit

AUX/Pre Out Harness GPS Antenna & Wire Hooks Documents

Direct Camera Adapter Source Unit HDMI Bracket USB Extension Cable

Round Head Screws (4pcs)

Flat Head Screws

(4pcs Not Used)

OM QR Card

Alpine

Registration Card

Installation

Manual

iDatalink Maestro Box Parts (ALP-MRR2/ALP-HRN-WRA2)

Maestro Flashing Cable FM/AM Antenna Adapter iDatalink Maestro Module

Main Harness

SiriusXM Radio Antenna Adapter

(only for vehicles with factory

SiriusXM)

(For Vehicles With Uconnect®)

USB Adapter

+ 11 hidden pages