Installation Manual Double DIN Kit
APF-F291320VW
VW Amarok (Type 2H
•
• VW Beetle (Type 16)
• VW Caddy (Type 2K)
• VW CC (Type 3CC)
• VW Eos (Type 1F)
VW Golf V/IV
•
VW Jetta V/VI
•
Compatible with these Alpine double DIN devices
Alpine Navigation
)
VW Passat (Type 3C/CC)
•
VW Polo (Type 6R)
•
VW Scirocco III (Type 13)
•
VW Sharan II (Type 7N)
•
VW Tiguan (Type 5N)
•
VW Touran (Type 1T/GP/GP2
•
VW T5 facelift
•
2
© 2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
1
Double DIN Kit contents:
• (1) Facia Plate
• (2) Metal Brackets • (3) Fixing Screws
4 x
3
4 x
Installation Manual Double DIN Kit APF-F291320-10 VW
VW Golf V only:
VW Golf V only
Pull up the aircone unit (xed by clips).
Remove two Torx (TX20) screws
(see arrows) which become visible.
1. Remove the original trim
frame, surrounding the radio
(xed by clips).
2. Remove the 4 Torx (TX20) screws
(These screws will be used again
later).
4. Mount both metal brackets at the
facia plate as shown in the sample
picture on the left.
5. Push the Double DIN head unit
into the facia plate and x the sides of the head unit with 2 screws
on each side.
6. Connect all wires and x the
Double DIN head unit with the
original Torx (TX20) screws.
Remove the OEM head unit.
All installation work must be performed by a qualied professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
7. Reinstall everything in reverse
order to nish installation.
Loading...