Allied Telesis AT-iBG910 User Manual

Datasheet | intelligent Business Gateways
AT-iBG910
ADSL Business Gateway with Analog and Digital VoIP Ports
Time Applications Optimization
AT-iBG910A/B
1 x annex A/B ADSL2+, 8 x 10/100TX, 4 x FXS, 2 x ISDN BRI
Broadband Business Gate
Small-Medium Enterprise
The AT-iBG910 is the family of Business Gateways for small-medium enterprise applications.The AT-iBG910 combines a broadband ADSL2/2+ connection to the WAN with Layer 3 capabilities and enhanced VoIP features set for both analog and digital terminal connections.
Voice over IP
The AT-iBG910 lev protocols such as H.323, SIP and MGCP on both FXS and ISDN BRI interfaces.VoIP interoperability has been established with major softswitch vendors. Furthermore, the AT-iBG910 allows the connection of modems and faxes to its voice ports. Quality of Service is provided through mechanisms such as the Type of Service (ToS), priority tagging of voice traffic using IEEE 802.1p, as well as silence suppression and local gener noise; the result is an excellent voice quality.
Within a SIP environment, the AT-iBG910 also
ts IP PBX functionality that guar
suppor local switching of calls among FXS and ISDN BRI interfaces as w to the LAN ev not a
vailable.
erages Voice over IP signaling
ation of comf
VoIP phones connected
ell as
en when central VoIP service is
ort
antees
Real
The AT-iBG910 supports industr y leading Quality of Service (QoS) through ISO Layer 2 and 3 prioritization techniques including priority tagging with IEEE 802.1p,Type of Service and DSCP fields.
The AT-iBG910 is optimized for IP video streaming.The iBG ‘snoops’ IGMP packets in-
ansit allowing simultaneous delivery of
tr different multicast transmissions such as different movies or TV channels. multiple high-quality, high bit-rate video streams without impacting data traffic or IP telephony while delivering the fast channel change that users expect from video services.
MPEG video service management and diagnosis is possible through dedicated commands and video quality can be monitored using Allied Telesis’ unique MPEG stream monitoring tool.
This enab
les
Data Delivery and Security
The extensive support for per por t rate-limiting in the AT-iBG910 enables service providers to
er tiered data services for the wide
deliv spectrum of end-customer profiles, providing
um flexibility in ser
maxim
Secur
ity is assured by an integral Stateful Inspection Firewall with NAT and an Intrusion Detection System (IDS) to protect end-users’ networks from Denial of Service (DoS), port scanning and Web spoofing.
vice differentiation.
Management and Deployment
AT-iBG910 is designed to be easy to
The deploy and manage. With the Zero Touch Conf
igur
ator (ZTC) software platform, this family of products can be remotely provisioned and managed. ZTC is a distributed configuration system pro registration plus intelligent, automatic conf based str with service providers’ existing OSS platforms.
viding secure authentication and
ation of remote iBG units.
igur
ucture enab
les seamless integration
Its XML-
Key Features
ADSL2+ or WAN interface
H.323, SIP and MGCP VoIP protocol support
Integrated SIP proxy server
Major softswitch manufacturer compatibility
Support for analog (FXS), digital (ISDN BRI)
terminal connection and VoIP phones
Triple Play ready
Stateful Inspection Firewall / NAT
DMZ support
Intrusion Detection System: DoS, port scanning
and Web spoofing protection
Zero Touch Configurator and TR-069 support
Service specific management and monitoring –
ensures Quality of Service to customers
RoHS compliant
y standard
y services.
iety of
the industr
iple Pla
r
T
In addition, integrated and provides efficient, scalable and secure provisioning and support for a wide var
Allied Telesis www.alliedtelesis.com
TR-069 is full
y
AT-iBG910 | ADSL Business Gateway with Analog and Digital VoIP Ports
Specifications
Hardware
8 x 10/100TX (RJ-45) 4 x FXS (RJ-11) 2 x ISDN BRI (RJ45) 1 x annex A ADSL2/2+ (RJ-11) (AT-iBG910A) 1 x annex B ADSL2/2+ (RJ-45) (AT-iBG910B)
Ethernet
Layer 2 wirespeed packet switching Tag-based IEEE 802.1Q VLANs (max 16) IEEE 802.1Q tag insertion and stripping Port mirroring of ingress/egress traffic DHCP client, server and relay 2K MAC address FDB
WAN Protocols
PPPoE, PPPoA, IPoA (PAP/CHAP authentication) RFC 1483 routed and bridged Global IP address pool DNS client, relay Static and dynamic IP address assignment
Routing and Multicast
PPP and IP routing RIPv1 and v2 IGMPv2 IGMP snooping IGMP proxy
Security
NAT Stateful Inspection Firewall Dynamic port opening Intrusion detection and blocking system Access Control List IPSec/VPN passthrough
QoS
IEEE 802.1p prioritization Programmable ingress/egress rate limiting Four QoS queues per port DSCP/ToS Strict priority/WF2Q+ scheduling Stream priority/limiting classification
VoIP Features
G.711 a-law and µ-law 64kbps G.729 8kbps G.726 16/24/32/40kbps G.168 LEC 8-32 msec T.38 fax relay RTP voice packet encapsulation Automatic fax/modem detection Voice Activity Detection (VAD) Comfort Noise Generation (CNG) Error mitigation/bad frame interpolation Adaptive jitter buffer 5 REN Caller ID Call transfer Call waiting Call hold Message waiting DTMF Relay
IP PBX
SIP proxy registrar
xy locator
SIP pro
Management
AlliedView NMS Zero Touch Configurator TR-069 Telnet SSH Remote software upgrade Web GUI CLI SNMP v1, v2 and v3
Status LEDs
Power System xDSL Training/Link LAN Link/Activity VoIP Use/Ready/Ringing
Memory
RAM 32MB Flash
8MB
Physical Characteristics
Dimension 5cm x 20cm x 37cm (H x D x W) (2” x 7.87” x 14.5”)
Approvals and Certifications
CE Safety EN 60950 CSA 950/US UL 1950 Emission FCC Part 15 Class B Part 68
EN55022 Class B
Immunity EN55024
Ordering Information
AT-iBG910A-xx (990-001919-xx)
1 x annex A ADSL2+, 8 x 10/100TX, 4 x FXS, 2 x ISDN BRI
AT-iBG910B-xx (990-001920-xx)
1 x annex B ADSL2+, 8 x 10/100TX, 4 x FXS, 2 x ISDN BRI
AT-CONSOLECABLE (855-000144)
Console cable (Cisco pinout)
Where xx = 00 for no power cord
10 for U.S. power cord 30 for U.K. power cord
Australian power cord
40 for 50 for European power cord
VoIP Protocols
H.323 3.0 SIP 2.0 MGCP/NCS 1.0
Power Characteristics
Internal power supply Input
100-240V
Max power consumption 25W
vironmental Specifications
En
AC
50-60Hz
,
Operating temperature 0ºC to 40ºC Max operating humidity 80% RH (non-condensing) Storage temperature -20ºC to 70ºC Max storage humidity 95% RH (non-condensing)
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895 European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11 Asia-Pacific Headquar
ters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2008 Allied Telesis Inc.All r ights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the property of their respective owners. 617-000202 Rev. D
Loading...