Alfa Romeo 4C Spider 2016 Owner's Manual

2016
SPIDER
OWNER’S MANUAL
VEHICLES SOLD IN CANADA
With respect to any Vehicles Sold in Canada, the name FCA US LLC shall be deemed to be deleted and the name FCA Canada Inc. used in substitution therefore.
DRIVING AND ALCOHOL
Your driving ability can be seriously impaired with blood alcohol levels far below the legal minimum. If you are drinking, don’t drive. Ride with a designated non­drinking driver, call a cab, a friend, or use public trans­portation.
WARNING!
Driving after drinking can lead to an accident. Your perceptions are less sharp, your reflexes are slower, and your judgment is impaired when you have been drinking. Never drink and then drive.
This manual illustrates and describes the operation of features and equipment that are either standard or op­tional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.
FCA US LLC reserves the right to make changes in design and specifications, and/or make additions to or improve­ments to its products without imposing any obligation upon itself to install them on products previously manu­factured.
Copyright © 2015 FCA US LLC
SECTION PAGE
INTRODUCTION . ..............................................................3
1
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ..................................9
2
UNDERSTANDING THE FEATURES OF YOUR VEHICLE ..................................73
3
UNDERSTANDING YOUR INSTRUMENT PANEL .......................................117
4
STARTINGANDOPERATING ....................................................173
5
TABLE OF CONTENTS
1 2 3 4 5
WHATTODOINEMERGENCIES..................................................245
6
MAINTAININGYOURVEHICLE...................................................263
7
MAINTENANCE SCHEDULES ....................................................329
8
IF YOU NEED CONSUMER ASSISTANCE ............................................343
9
INDEX .....................................................................353
10
6 7 8 9 10

INTRODUCTION

CONTENTS
INTRODUCTION ........................4
1
VEHICLE IDENTIFICATION NUMBER ........7
HOW TO USE THIS MANUAL ..............5
WARNINGS AND CAUTIONS ..............7
VEHICLE MODIFICATIONS/ALTERATIONS ....8
4 INTRODUCTION

INTRODUCTION

Congratulations on selecting your new vehicle. Be as­sured that it represents precision workmanship, distinc­tive styling, and high quality - all essentials that are traditional to our vehicles.
This Owner’s Manual has been prepared with the assis­tance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle. It is supplemented by Warranty Information, and various customer-oriented documents. Please take the time to read these publications carefully. Following the instruc­tions and recommendations in this manual will help assure safe and enjoyable operation of your vehicle.
The enclosed Warranty Information lists the services that FCA US LLC offers to its customers:
The Warranty with terms and conditions for maintain­ing its validity
The range of additional services available to FCA US LLC customers
NOTE: After reviewing the owner information, it should be stored in the vehicle for convenient referenc­ing and remain with the vehicle when sold.
When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech­nicians and genuine MOPAR® parts, and cares about your satisfaction.

HOW TO USE THIS MANUAL

Consult the Table of Contents to determine which section contains the information you desire.
Since the specification of your vehicle depends on the items of equipment ordered, certain descriptions and illustrations may differ from your vehicle’s equipment.
INTRODUCTION 5
The detailed index at the back of this Owner’s Manual contains a complete listing of all subjects.
Consult the following table for a description of the symbols that may be used on your vehicle or throughout this Owner’s Manual:
1
6 INTRODUCTION

WARNINGS AND CAUTIONS

This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision, bodily injury and/or death. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information. Observe all Warn­ings and Cautions.

VEHICLE IDENTIFICATION NUMBER

The Vehicle Identification Number (VIN) is found on the left front corner of the instrument panel, visible through the windshield. This number also appears engraved on an Aluminum plate glued and riveted on the floor crossmember under the passenger seat.
INTRODUCTION 7
1
Vehicle Identification Number
NOTE: It is illegal to remove or alter the VIN.
8 INTRODUCTION

VEHICLE MODIFICATIONS/ALTERATIONS

WARNING!
Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

CONTENTS
A WORD ABOUT YOUR KEYS .............11
To Disarm The System ..................16
2
Ignition Key Removal ...................11
Locking Doors With A Key ...............13
Key-In-Ignition Reminder ................13
SENTRY KEY ..........................13
Replacement Keys .....................14
General Information ....................14
VEHICLE SECURITY ALARM SYSTEM — IF
EQUIPPED ............................15
To Arm The System ....................16
ILLUMINATED ENTRY ...................17
REMOTE KEYLESS ENTRY (RKE) — IF
EQUIPPED ............................18
To Unlock The Doors ...................19
To Lock The Doors .....................19
Transmitter Battery Replacement ...........20
General Information ....................21
DOOR LOCKS .........................22
Central Door Locking/Unlocking ...........22
10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Locking/Unlocking Doors From The Inside . . .23
Child Restraints .......................56
Emergency Door Locking Device ...........24
Door Opening/Closing Mechanism Reset .....25
WINDOWS ...........................25
Power Windows .......................25
DECKLID .............................28
OCCUPANT RESTRAINT SYSTEMS ..........30
Important Safety Precautions ..............30
Seat Belt Systems ......................32
Supplemental Restraint System (SRS) ........42
Transporting Pets ......................66
ENGINE BREAK-IN RECOMMENDATIONS ....67
SAFETY TIPS ..........................67
Transporting Passengers .................67
Exhaust Gas .........................68
Safety Checks You Should Make Inside The
Vehicle .............................69
Periodic Safety Checks You Should Make Outside
The Vehicle ..........................70

A WORD ABOUT YOUR KEYS

The key fob contains the Remote Keyless Entry (RKE) transmitter with an integrated key. To use the mechanical key simply push the mechanical key release button.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11

Ignition Key Removal

1. Push the brake pedal and place the transmission into
first (1) or reverse (R) gear by selecting/pushing the buttons on the console.
2
Key Fob
1 — Vehicle Key 2 — Push To Open/Close Vehicle Key
Transmission Gear Selector
2. Rotate the key to the STOP (OFF/LOCK) position and
engage the handbrake and release brake pedal.
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
3. Remove the key from the ignition switch lock cylinder.
Ignition Switch Positions
1 — STOP (OFF/LOCK) 2 — MAR (ON/RUN) 3 — AVV (START)
WARNING!
Before exiting a vehicle, always shift the vehicle into FIRST gear or REVERSE, apply the parking brake, turn the vehicle OFF, remove the key fob from the ignition and lock your vehicle.
Never leave children alone in a vehicle, or with access to an unlocked vehicle.
Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Chil­dren should be warned not to touch the parking brake, brake pedal or the transmission gear selec­tor.
Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.
(Continued)
WARNING! (Continued)
Do not leave children or animals inside parked vehicles in hot weather. Interior heat build-up may cause serious injury or death.
CAUTION!
An unlocked vehicle is an invitation. Always remove the key from the ignition and lock all the doors when leaving the vehicle unattended.

Locking Doors With A Key

You can insert the key with either side up. To lock the door, turn the key to the left. To unlock the door, turn the key to the right. Refer to “Body Lubrication” in “Main­taining Your Vehicle” for maintenance information.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13

Key-In-Ignition Reminder

Opening the driver’s door when the key is in the ignition and the ignition switch position is in the STOP (OFF/ LOCK) position, sounds a signal to remove the key.

SENTRY KEY

The Sentry Key Immobilizer System prevents unauthor­ized vehicle operation by disabling the engine. The system does not need to be armed or activated. Operation is automatic, regardless of whether the vehicle is locked or unlocked.
The system uses ignition keys which have an embedded electronic chip (transponder) to prevent unauthorized vehicle operation. Therefore, only keys that are pro­grammed to the vehicle can be used to start and operate the vehicle.
2
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
NOTE: A key which has not been programmed is also considered an invalid key, even if it is cut to fit the ignition switch lock cylinder for that vehicle.
If the Vehicle Security Light is on after the key is turned to the ON/RUN position, it indicates that there is a problem with the electronics.
CAUTION!
Always remove the Sentry Key from the vehicle and lock all doors when leaving the vehicle unat­tended.
The Sentry Key Immobilizer system is not compat­ible with some aftermarket remote starting sys­tems. Use of these systems may result in vehicle starting problems and loss of security protection.

Replacement Keys

NOTE: Only keys that have been programmed to the vehicle electronics can be used to start the vehicle. Once a Sentry Key has been programmed to a vehicle, it cannot be programmed to any other vehicle.
NOTE: When having the Sentry Key Immobilizer Sys­tem serviced, bring all vehicle keys with you to an authorized dealer.

General Information

The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
All of the keys provided with your new vehicle have been programmed to the vehicle electronics.
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired op­eration.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

VEHICLE SECURITY ALARM SYSTEM — IF EQUIPPED

The Vehicle Security Alarm monitors the doors and decklid for unauthorized entry and the ignition for unauthorized operation. If something triggers the alarm, the Vehicle Security Alarm will prevent the vehicle from starting. It will also emit an acoustic signal and flash the park lights, and taillights.
Operation
The alarm activates in the following cases:
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15
1. Wrongful opening of one of the doors or the decklid (perimeter protection);
2. Wrongful operation of the ignition switch (key turned to MAR ON/RUN);
3. Cutting of the battery leads;
4. Anomalous lifting/tilting of the car.
Operation of the alarm is indicated by an acoustic and visual signal (flashing of the direction indicators for several seconds). The alarm activation modes may vary according to the market. There is a maximum number of acoustic/visual cycles. When this is reached the system returns to normal operation.
NOTE:
The engine locking function is guaranteed by the Alfa
Romeo CODE, which is automatically activated when the key is extracted from the ignition switch.
2
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
The alarm is adapted to meet requirements in various countries.

To Arm The System

With the doors and decklid closed and the ignition key either turned to STOP (OFF/LOCK) or removed, point the key towards the vehicle then push and release the lock button.
The system emits a visual signal and activates door locking.
A self-diagnosis stage lasting approximately 30 seconds precedes the activation of the alarm. During the self­diagnosis, the vehicle security light flashes in the instru­ment panel at a frequency of about one flash per second.
After the self-diagnosis stage, the vehicle security light flashes at a lower frequency (approximately one flash every three seconds).
If, after the alarm is switched on, a second visual signal emit via the vehicle security light in the instrument panel, wait about four seconds and switch off the alarm by pushing the lock button, check that the doors and decklid are closed correctly and then reactivate the system by pushing the unlock button.
If the alarm emits a visual signal even when the doors and decklid are closed correctly, a system malfunction has occurred: in this case, contact a authorized vehicle Dealership.

To Disarm The System

Deactivation
Push the unlock button.
The following operations are performed:
Two brief flashes of the direction indicators.
Unlocking of the doors.
NOTE:
If the central door locking system is released using the metal insert of the key, the alarm is not disabled.
In the event of accidental activation of the alarm, or in any case to interrupt the visual signal cycle when activated, it is possible to push the unlock button or turn the ignition key to MAR (ON/RUN) for at least five seconds, after which the system will deactivate.
Disarming
To completely disable the alarm (e.g. during a lengthy period of vehicle inactivity), lock the vehicle by turning the metal insert of the key in the door lock.
NOTE: If the batteries of the key fob run out or there is a fault in the system, the alarm can be switched off by inserting the key in the ignition switch and turning it to MAR (ON/RUN).
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17

ILLUMINATED ENTRY

The interior lights will turn on whenever a door is opened and the dimmer switch is not in the defeat position.
The interior lights will turn on, remain on for approxi­mately 30 seconds, and then fade to off if a door is opened using the outside door handle and then closed or a door is unlocked using the vehicles key.
The interior lights will turn on and remain on for about four seconds and then fade to off if a door is opened using the inside door handle.
NOTE: The interior light is located in the headliner in between the sun visors. The interior light can be set to three different positions (Off/Left Position, Center Posi­tion, On/Right Position).
2
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

REMOTE KEYLESS ENTRY (RKE) — IF EQUIPPED

This system allows you to lock or unlock the doors from distances up to approximately 66 ft (20 m) using a hand-held Remote Keyless Entry (RKE) transmitter. The RKE transmitter does not need to be pointed at the vehicle to activate the system.
Key Fob
1 — Vehicle Key 2 — Push To Open/Close Vehicle Key
NOTE: The line of transmission must not be blocked with metal objects.

To Unlock The Doors

Push and release the UNLOCK button on the RKE transmitter to unlock the doors. The park lights and turn signal lights will flash to acknowledge the signal and the illuminated entry system will turn on.
NOTE: The Door Unlock Indicator will illuminate in the instrument panel when one or both doors are unlocked.

To Lock The Doors

Push and release the LOCK button on the RKE transmit­ter: locking of doors, switching off of internal roof light and single flashing of direction indicators.
If one or more door are open, the doors will not be locked. This is indicated by a rapid flashing of the direction indicators. The doors will be locked if the decklid is open however.
When a speed of more than 12 mph (20 km/h) is reached, the doors will be locked automatically if the Autoclose
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19
function was selected. Refer to “Electronic Vehicle Infor­mation Center (EVIC)” in “Understanding Your Instru­ment Panel” for further information.
When the doors are locked from outside the vehicle (using the remote control), the door lock indicator will illuminate for a few seconds and then start flashing (deterrent function).
Door LED Lock Indicator
2
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Transmitter Battery Replacement

NOTE:
Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
The recommended replacement battery is CR2032.
Battery Replacement Procedure
Replace the Key Fob battery with the following proce­dure:
1. Push button #1 and move the metal insert #2 to opening position;
2. Turn screw #3 to unlock using a fine bit screwdriver;
Key Fob Screw Location
3. Remove battery compartment #4;
4. Replace battery #5, respecting the polarity;
5. Reinsert compartment #4 in the key and secure it by turning screw #3 to lock.
Key Fob Screw Location
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21

General Information

The following regulatory statement applies to all Radio Frequency (RF) devices equipped in this vehicle:
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired op­eration.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
DOOR LOCKS Central Door Locking/Unlocking
Locking Doors From The Outside
With the doors closed, push the lock button on the key fob or turn the metal insert (located inside the key fob) in the door lock.
The Door Lock LED Indicator button
will illuminate
to indicate that the doors have locked.
Door Lock LED Indicator
NOTE: Door locking is carried out with all doors shut.
Unlocking Doors From The Outside
Push the unlock button on the key or turn the metal insert (located inside the key) in the driver side door lock.
WARNING!
For personal security and safety in the event of a collision, lock the vehicle doors before you drive as well as when you park and leave the vehicle.
Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the transmission gear selector.
Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23

Locking/Unlocking Doors From The Inside

Push the Lock LED Indicator button
. The button has an LED that indicates whether the doors are locked or unlocked.
Pushing the Lock LED Indicator button
again cen-
trally unlocks all doors and switches off the LED.
Pushing the Lock LED Indicator button
again cen­trally locks all the doors. The doors will be locked only if all the doors are properly shut.
Once the doors have been locked using the remote control or the key, it will no longer be possible to unlock them by pushing the Lock LED Indicator button
.
NOTE: In the absence of electrical power supply (blown fuse, battery disconnected, etc.), it is still possible to lock the doors manually.
2
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Emergency Door Locking Device

Passenger Side Door
The passenger side door has a device to lock it when there is no current.
To lock it, place the metal insert of the ignition key in housing #1 and turn it clockwise.
Emergency Door Lock Function
To restore the starting condition of the door locks (only if battery charge restored), proceed as follows:
Push the Unlock button on the remote control;
Push the door locking/unlocking LED indicator but-
ton
on the dashboard; or
Introduce the metal insert of the ignition key in the front door pawl; or
Pull the internal door handle.

Door Opening/Closing Mechanism Reset

If the battery is disconnected or the protection fuse blows, the door opening/closing mechanism must be reset as follows:
1. Close all the doors.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25
2. Push the unlock button on the key or the door locking/unlocking LED indicator button
on the
dashboard.
3. Push the lock button on the key or the door locking/ unlocking LED indicator button
on the dash-
board.
WINDOWS Power Windows
NOTE:
These operate when the ignition key is turned to
MAR-ON and for about three minutes after the igni­tion key is turned to STOP or removed unless one of the doors is opened.
The buttons are located on the center console.
2
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Power Window Switch
1 — Driver Power Window Switch 2 — Passenger Power Window Switch
Push/Pull the corresponding buttons to open/close the desired window.
When one of the two buttons is pushed briefly, the window moves in stages; if the button is held down to open, continuous automaticoperation is activated.
If the button is pushed again, the window will stop in its current position. If the button is pushed for several seconds, the window lowers automatically (only with ignition key in MAR-ON position).
Continuous Automatic Operation
This is activated by pushing one of the two buttons for longer than half a second. The window will stop when it is fully opened, or when the button is pushed again.
It can be used on both the driver side and passenger side, only for lowering the window.

Electric Window System Reset

After a break in power supply for the control units (battery replaced or disconnected or protective fuses for
the electric window control units replaced), the auto­matic operation of the windows must be restored.
The restoration procedure must be performed as de­scribed below with the doors closed:
1. Completely open the driver’s door window keeping the operating button pushed for at least three seconds after the (lower) end of travel position is reached.
2. Completely raise the driver side window and hold the button down for at least three seconds once the (upper) end of travel position has been reached.
3. Proceed in the same way as described in points 1 and 2 for the passenger side door.
4. Make sure that the reset is correct by checking that the windows work automatically.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27
WARNING!
Improper actuation of the power windows may be dangerous. Never leave children unattended in a vehicle, and do not let children play with power windows. Before and during window operation make sure no one and no object (including clothing) is in the path of the moving glass or its mechanism. Do not leave the key fob in or near the vehicle, or in a location accessible to children. Occupants, particu­larly unattended children, can become entrapped by the windows while operating the power window switches. Such entrapment may result in serious injury or death.
2
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

DECKLID

NOTE:
During normal vehicle operation, the luggage compartment can reach temperatures above 149º F (65° C). Pay attention when transporting objects that may be damaged at such temperatures. Do not keep aerosol cans in the vehicle: danger of explosion. Aerosol cans must not be exposed to temperatures above 122º F (50° C).
Opening Procedure
With driver side door open, pull lever #1 located at the point illustrated in the figure.
Decklid Release Lever Location
1 — Decklid Release Lever
Raise the decklid and release supporting rod from its locking device.
Loading...
+ 341 hidden pages