Page 1
SK 10
Stützkonsole für Wand-Flachspeicher
WSP 1210 F bis WSP 4810 F
WSP 1210 DF bis WSP 3610 DF
WSP 1510 S
Ergänzung zur Gebrauchs- und Montageanweisung
Deutsch
SK 10
Support Console for Wall Mounted Flat Storage Heaters
WSP 1210 F to WSP 4810 F
WSP 1210 DF to WSP 3610 DF
WSP 1510 S
Supplement to the Operating and Installation Instructions
SK 10
Soutien auxiliaire pour accumulateurs plats muraux
WSP 1210 F à WSP 4810 F
WSP 1210 DF à WSP 3610 DF
WSP 1510 S
English
Français
Annexe de la notice d’utilisation et de montage
SK 10
Bevestigingsbeugel voor platte wandaccumulator
WSP 1210 F tot WSP 4810 F
WSP 1210 DF tot WSP 3610 DF
WSP 1510 S
Aanvulling op de gebruiks- en montagehandleiding
Nederlands
Page 2
1
Ladung
Ladung
Entladung
Ladung
Entladung
a
Entladung
a
Ladung
Entladung
a
a
b
Montage bei nicht
Floor installation
Bodenaufstellung
Mounting on
unstable walls
tragfähigen Wänden
Mounting on walls
Montage bei nicht ausreichend
of limited stability
tragfähigen Wänden
Mounting on walls
Montage bei ausreichend
of sufficient stability
tragfähigen Wänden
23
Ladung
a
Entladung
b
Wall holder
Wandhalter
Stützkonsole
Support console
45
4
Page 3
1. Operating Instructions
1.1 Functional Principle
In connection with the standard wall console of the storage heater WSP-F
the support console must be used for stability in the case of restricted support capacity of the
wall.
Mounting rails in the vicinity of the support console may have to be removed for this.
For storage heaters WSP 4210 F and WSP 4810 F the storage heater must be fixed to a stable wall
with the wall holder and the support console SK 10.
2. Installation Instructions
The support console must be screwed to the heater’s wall holder before screwing this to the wall.
The fitting set must be installed as follows:
• Push the wall holder onto the support console (elongated holes on the wall side);
• Screw the support console and wall holder with the enclosed self-tapping screw M6;
• Fix the wall holder with the support console to the wall as described in the installation
instructions of the unit under section 2.5.
For the User and the Fitter
English
2.1 Packing Unit
2 support consoles
2 screws M6x10
5
Page 4
EHT Haustechnik GmbH
Markenvertrieb AEG
Gutenstetter Straße 10
D-90449 Nürnberg
GERMANY
www.aeg-haustechnik.de
info@eht-haustechnik.de
Kundendienst
Telefon: +49 18 03/70 20 20
Telefax: +49 18 03/70 20 25
Ersatzteilverkauf
Telefon: +49 18 03/70 20 40
Telefax: +49 18 03/70 20 45
H 262 403 555
EHT-Haustechnik GmbH
248575/33249/1/7827 · WI · Technische Änderungen vorbehalten · Subject to technical modifications · Sous réserve de modifications techniques · Technische wijzigingen voorbehouden
Loading...