AEG Protect B. PRO USER MANUAL

Protect

B. PRO

Single phase in / out UPS system

Uninterruptible Power Supply

1-Phase Input; 1-Phase Output

750 – 3000 VA power supply with integrated batteries

Efficient and innovative UPS solutions for servers and networks

With its high power factor of 0.9lag, Protect B. PRO is one of the most efficient systems with VI protection technology.

Many ways of communication are possible, thanks to parallel operation of the RS232 or USB interfaces and the extension slot.

Also, the adaptation of the UPS to the requirements of modern IT environments is reflected by the design. The UPS can be configured directly with the control panel. Batteries can be easily replaced by means of the innovative flap mechanism at the front.

By means of the included accessories and the rotary screen, the UPS can be operated in the rack as well as in the tower mode.

Main characteristics

»»Modern VI (line interactive) protection technology with sinus-shaped output voltage

»»Low operating costs through high efficiency, power factor 0.9lag

»»Compact shape, flexible use through combined design tower / rack, rotary screen

»»Surge protection

(RJ11 / RJ45) for telephone, fax, modem and network »»Configuration directly on the LCD

»»Full display of the essential parameters on the screen, e.g. the remaining runtime in minutes

»»Intelligent monitoring system with USB and RS232 interface; parallel operation of USB / RS232 and extension slot is possible

Classification VI SS 211 acc. to IEC 62040-3

Power type rating

Part number (UPS incl. internal battery)

Part number (battery pack)

UPS input

Input voltage

Voltage range without battery mode

Frequency (auto selection)

Current consumption at nominal load (max.)

UPS output

Rated output voltage / AVR technology

Frequency in battery mode

Output current (at 230 V AC)

Transfer time at mains outage

Voltage waveform

Overload response (VI operation)

Overload response (battery operation)

Battery

Type

Integrated

Rated voltage

Battery management

Autonomy time in min. (full / half-load, cos j = 0.9lag)

Ditto UPS incl. battery expansion unit

Charging time (to 90 % rated capacity)

Communication

User interface

Interface (dual monitoring)

Shutdown software (on CD)

Failure indicators (acoustic /visual)

General data

Efficiency (in ECO mode)

Efficiency (at whole AVR range)

Audible noise (1 m distance)

Ditto in ECO mode and max. 70 % load

Operating temperature range

Humidity

Operation altitude

EMC conformity

Product safety

Data line protection

Mains input

Number of outputs / controllable via connectors

Equipment color

Dimensions approx. W x H x D (mm)

Weight approx. UPS incl. battery system Battery expansion unit

Shipment

Conformity

B. 750 PRO		B. 1000 PRO	B. 1400 PRO		B. 1800 PRO	B. 2300 PRO	B. 3000 PRO
750 VA		1000 VA	1400 VA		1800 VA	2300 VA	3000 VA
675 W		900 W	1260 W		1620 W	2070 W	2700 W
600 000 8422	600 001 3872		600 000 8426	600 001 3873		600 000 8431	600 001 3875
	600 001 3876			600 001 3874			600 001 3877
			220 V AC / 230 V AC / 240 V AC
			±20 %
			50 Hz / 60 Hz ±5 Hz
4 A		5.4 A	7.5 A		9.7 A	12.4 A	16.1 A
	208 V AC / 220 V AC / 230 V AC (default) / 240 V AC ±10 % (±3 % free running)
			50 Hz / 60 Hz ±1 Hz
3.2 A		4.3 A	6.1 A		7.8 A	10 A	13 A
			2 – 6 ms (typical), 8 ms max.
			sinusoidal
		<120 % for 5 min. / 120 – 150 % for 10 s / >150 % for 1 s
		<110 % for 1 min. / 110 – 150 % for 10 s / 150 – 200 % for 500 ms
		Sealed, maintenance free (proprietary brand), hot swappable
Yes		Yes	Yes		Yes	Yes	Yes
24 V DC			48 V DC			72 V DC
		Temperature compensated with overload and deep discharge protection;
		automatic battery test; battery pack detection
3.5 / 10	3.5 / 11		5 / 13	4.5 / 13.5		3.5 / 13.5	4 / 11
	14 / 36			17.5 / 43.5			15 / 36
				8 h

LCD display with digital indication of relevant UPS values

RS232 and USB (with status notification and UPS data), additional communication slot in parallel mode (SNMP / relay card); input contact for emergency power off

5 network licenses for all common OS (e.g. Windows, Linux, Mac)

3 LED indicators show UPS status, detailed indication via LCD display (mains failure, overload, battery discharge, battery replace, fan failure)

			>97 %
			>90 %
	≤45 dB(A)				≤55 dB(A)
	≤40 dB(A)				≤45 dB(A)
			0° – 40 °C
		0 – 90 % (without condensation)
		Up to 1000 m at nominal load
	EN 62040-2 Class C2, EN 61000-3-2, EN 61000-3-3
			EN 62040-1
	RJ11 (telephone, fax, modem) / RJ45 (Ethernet 10 Mbit / s / 100 Mbit / s)
	IEC 320 C14				IEC 320 C20
		8 / 4			7 / 3
	8 x IEC 320 C13			6 x IEC 320 C13, 1 x IEC 320 C19
		Black metal case / silver front
482.6 (19") x 88 (2 U) x 420		482.6 (19") x 88 (2 U) x 520		482.6 (19") x 88 (2 U) x 640
14.5 kg	15 kg	24 kg	25 kg	29 kg	29.5 kg
	16 kg (BP)		26.5 kg (BP)		39 kg (BP)

Mains input cord (1 x EU, 1 x UK), 2 x device connection cables (10 A), additional cable (16 A) for Protect B. 2300 PRO and Protect B. 3000 PRO, 2 x mounting brackets, 2 x base feet, 1 x management software “CompuWatch” (CD), 5 network licenses, RS232 and USB cable, operating instructions

will make binding	of the data provided here.
only serves for information purposes and can be modified at any time. We	these terms, we assume liability neither for the accuracy nor completeness
or warranties. Content	non-binding nature of
guarantees	Due to the
AEG PS - Protect B. PRO - EN - 10/2014 V2 - Technical data in this document does not contain any binding	commitments only upon receipt of concrete enquiries and customer notification of the relevant conditions. AEG is a registered trademark used under license from AB Electrolux.

AEG Power Solutions

Approach your local AEG Power Solutions representative for further support. Contact details can be found on:

www.aegps.com