FAVORIT 35085 Vi
User manual |
Dishwasher |
2
Dear Customer
Thank you for choosing one of our high quality products.
With this appliance you will experience the perfect combination of functional design and cutting edge technology.
Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence.
In addition to this you find environmental and energy saving aspects as an inte gral part of our products.
To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfect ly and most efficiently.
To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
The following symbols are used in this user manual:
1Important information concerning your personal safety and information on how to avoid damaging the appliance.
3General information and tips
2Environmental information
Contents 3
Contents
Operating Instructions |
4 |
Safety |
4 |
|
|
Diagram of Appliance |
5 |
|
|
Control Panel |
6 |
|
|
Prior to Using for the First Time |
8 |
|
|
Setting the Water Softener |
8 |
Adding dishwasher Salt |
10 |
Filling Up with Rinse Aid |
11 |
Activating/deactivating the acoustic signal |
13 |
In daily use |
14 |
|
|
Loading cutlery and dishes |
14 |
Adjusting the Height of the Upper Basket |
17 |
Adding Detergent |
18 |
Using 3 in 1 detergents |
20 |
Selecting the dishwashing cycle (Cycle Table) |
21 |
Starting a dishwashing cycle |
23 |
Setting the delay timer |
23 |
Switching Off the dishwasher |
24 |
Care and cleaning |
25 |
|
|
What to do if… |
27 |
|
|
Remedying small malfunctions |
27 |
If the dishwashing results are not satisfactory |
29 |
Disposal |
30 |
|
|
Technical data |
30 |
|
|
Notes for Test Institutes |
31 |
|
|
Installation and connection instructions |
32 |
|
|
Safety Information for the Installation |
32 |
|
|
Installing the Dishwasher |
32 |
|
|
Connecting the dishwasher |
33 |
|
|
Electrical Connection |
35 |
Guarantee/Customer Service |
36 |
|
|
Service and Spare Parts |
39 |
|
|
4 Operating Instructions
Operating Instructions
1 Safety
Prior to using for the first time
• Follow the ”Instructions for installation and connection”.
Correct Use
•The dishwasher is only intended for washing domestic dishes.
•Additions or modifications to the dishwasher are not permitted.
•Use only special salt, detergent and rinse aid suitable for domestic dishwash ers.
•Do not put any solvents in the dishwasher. This could cause an explosion.
Child Safety
•Keep packaging away from children. There is a risk of suffocation.
•Children often do not recognise the hazards associated with electrical appli ances. Don’t allow children to use the dishwasher unsupervised.
•Make sure that children and pets don’t climb into the dishwasher. Could en danger life!
•Dishwasher detergents can cause chemical burns to the eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dish washer detergent manufacturer.
•The water in the dishwasher is not for drinking. Risk of chemical burns.
General Safety
•Repairs to the dishwasher are only to be carried out by qualified/authorised service engineers.
•When the dishwasher is not being used, switch it off and shut off the water tap.
•Never unplug the appliance by pulling on the cable. Always pull the plug.
•Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.
•Never sit or stand on the open door.
•If the dishwasher is located in a room where there may be a frost, remove the connection hose from the tap after each use of the dishwasher.
Diagram of Appliance |
5 |
|
|
Diagram of Appliance
Upper basket spray arm and lower spray arm
Water softener unit.
Salt Container
Detergent
Dispenser
Rinse aid dispenser
Control panel
Rating plate
Filters
6 Control Panel
Control Panel
To use the appliance, always open the dishwasher door first.
ON/OFF button
The ON/OFF button is used to turn the dishwasher on and off.
Programme displays |
Control |
|
|
|
indicators |
|
|
|
Programme display 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set delay |
Programme |
|
|
|
|
|
|
End of cycle indicator |
|||||||
|
timer |
button |
|
|
|
|
|
|
|
|
|
|
||||
The programme button is used to:
–set the water softener
–set the acoustic signal
–select the programme
–cancel a dishwashing cycle.
Control Panel |
7 |
|
|
The control indicators have the following meanings:
1) |
Refill with dishwasher salt |
|
|
1) |
Refill with rinse aid |
|
|
|
|
1) These control indicators are never illuminated while a dishwashing cycle is running.
8 Prior to Using for the First Time
Prior to Using for the First Time
3If you wish to use 3 in 1 detergent:
–First read the section “Using 3 in 1 detergents”.
–Do not fill up with special salt or rinse aid.
If you do not use 3 in 1 detergent, before using for the first time
1.Set the water softener
2.Fill up with dishwasher salt
3.Fill up with rinse aid
Setting the Water Softener
The water softener must be set manually and electronically:
3To avoid scale deposits on the dishes and in the dishwasher, the dishes must be washed with soft water, i.e. water with a low lime content. The water softener must be set according to the table to the water hardness in the area where you live. Your local water company will be able to give you information about the water hardness in your area.
The dishwasher must be switched off.
Setting manually:
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3.Turn water hardness dial on the left wall of the dishwasher interior to 1 or 2 (see table).
Prior to Using for the First Time |
9 |
|
|
Setting electronically: 1. Press the ON/OFF button.
3If a programme display is illuminated, this wash programme is activated. The wash programme must be deselected:
Press and hold the programme button for approx. 3 seconds.
The programme display goes out. The indicator for the end of the wash pro gramme flashes.
2.Press and hold the programme button for approx. 3 seconds.
Programme display 2 will light up and go out after approx. 3 seconds. The indi cator for the programme button will flash.
The indicator for the end of the dishwashing cycle will flash simultaneously:
–The number of times that the indicator for the end of the dishwashing cycle flashes corresponds to the hardness setting.
–This sequence of flashes is repeated several times, with a 3 second pause in between.
3.Pressing the programme button increases the hardness setting by 1. (Exception: hardness setting 1 follows hardness setting 10).
4.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the control in dicator for special salt.
|
Water hardness |
|
Adjusting the hardness setting |
Number of |
|
|
|
|
|
|
|
in °d1) |
in mmol/l2) |
Range |
Manual |
Electronic |
flashes |
51 70 |
9,0 12,5 |
|
|
103) |
10 |
43 50 |
7,6 8,9 |
|
|
9 |
9 |
37 42 |
6,5 7,5 |
IV |
|
8 |
8 |
29 36 |
5,1 6,4 |
|
2* |
7 |
7 |
23 28 |
4,0 5,0 |
|
|
6 |
6 |
19 22 |
3,3 3,9 |
III |
|
5* |
5 |
15 18 |
2,6 3,2 |
|
4 |
4 |
|
|
|
||||
11 14 |
1,9 2,5 |
II |
|
3 |
3 |
4 10 |
0,7 1,8 |
I/II |
1 |
2 |
2 |
|
|
|
|
|
|
|
|
|
|
1 |
|
below 4 |
below 0.7 |
I |
|
no salt |
1 |
|
|
|
|
necessary |
|
|
|
|
|
|
|
1)(°d) German degree, measure of the hardness of water
2)[mmol/l] millimol per litre, international unit for water hardness
3)On this setting the length of the dishwashing cycle may be slightly longer. *) factory setting
10 Prior to Using for the First Time
Adding dishwasher Salt
To decalcify the water softener, it must be filled up with dishwasher salt. Use only special salt suitable for domestic dishwashers.
If you do not use 3 in1 detergent, fill up with dishwasher salt:
–Before using the dishwasher for the first time.
–When the control indicator for dishwasher salt is illuminated on the control panel.
1. Open the door and remove the lower basket.
2. Unscrew the lid on the salt dispenser by turning it anti clockwise.
3. Only when using the dishwasher for the first time:
Fill the salt dispenser with water.
4. Place the funnel (supplied) over the dis penser opening.
Fill the dispenser with dishwasher salt; the capacity of the dispenser is approx. 1.0 1.5 kg, depending on the size of the grains. Do not overfill the dispenser.
3If water overflows when filling up with dishwasher salt, this is completely harm less.
5.Clean away any salt remnants from the dispenser opening.
6.Screw the lid back on in a clockwise direction.
7.Run a dishwashing cycle after filling the salt dispenser with dishwasher salt. This will wash away salt water and salt crystals that have been spilt.
3Depending on the size of the salt granules, it can take several hours for the salt to dissolve in the water and for the control indicator for dishwasher salt to go out.
Prior to Using for the First Time |
11 |
|
|
Filling Up with Rinse Aid
Rinse aid causes the rinse water to flow easily from the crockery leaving gleam ing dishes and glassware.
If you do not use 3in1 detergent, fill up with rinse aid:
–Before using the dishwasher for the first time.
–When the control indicator for rinse aid is illuminated on the control panel.
Use only special rinse aid for dishwashers. 1. Open the door.
The rinse aid compartment is located on the inside of the dishwasher door.
2. Press the release button on the rinse aid compartment.
3. Open the cover.
4.Pour rinse aid in slowly right up to the bro ken “max” line;
this corresponds to a volume of approx. 140 ml when full.
5. Press the lid shut until it clicks into place. 6. Wipe up any spilt rinse aid with a cloth.
Otherwise there will be too much foam when rinsing.
12 Prior to Using for the First Time
Setting the Amount of Rinse Aid Required
3Only change the amount dispensed, if smears, milky spots (reduce the amount) or dried on water spots (increase the amount) can be seen on glasses and dishes. (See section “If dishwashing results are not satisfactory”.) The dosage can be set from 1 6. The dosage is pre set to “4” in the factory.
1.Open the dishwasher door.
2.Press the release button on the rinse aid
compartment.
3.Open the cover.
4.Set the dosage level.
5. Press the lid shut until it clicks into place. 6. If rinse aid has leaked out, wipe it away
with a cloth.
Loading...