ABB AC500-XC Technical Data

144 MAIN CATALOG PLC AUTOMATION

—

AC500-XC

Technical data

AC500-XC CPUs

Typ e PM591-ETH-XC PM592-ETH-XC PM595-4ETH-M-XC

Supply voltage 24 V DC

Current consumption on 24 V DC

Min. (module alone) 0.150 A 0.400 A

Max. (all couplers and I/Os) 0.850 A 1.2 A

User program memory - Flash EPROM and RAM 4096 kB 16384 kB

Integrated user data memor y 5632 kB thereof 1536 kB saved 16384 kB thereof 3072 kB saved

User Flashdisk (Data-storage, program access or also external with FTP)

Plug-in memory card depending on SD-Card used: no SD- HC card allowed, use MC502 accessor y

Web ser ver's data for user RAM disk 8 MB 32 MB

Data buffering battery no battery needed

Real-time clock (with battery back-up)

Cycle time for 1 instruction (minimum)

Binary 0.002 µs 0.0006 µs

Word 0.004 µs 0.001 µs

Floating-point 0.004 µs 0.001 µs

Max. number of centralized inputs/outputs

Max. number of extension modules on I/O bus up to max. 10 (S500 allowed)

Digital inputs / outputs 320 / 320

Analog inputs / outputs 160 / 160

Max. number of decentralized inputs/outputs depends on the used standard Fieldbus (1)

Program execution

Cyclical / Time controlled / Multi tasking

User program protection by password

Internal interfaces

COM1

RS232 / RS485 configurable

Connection (on terminal bases) pluggable spring terminal block, use TK502 cable in accessory

Programming, Modbus RTU, ASCII, CS31 master

COM2

RS232 / RS485 configurable

Connection (on terminal bases) D-sub 9 female, use TK501 cable in accessory

Programming, Modbus RTU, ASCII

FieldBusPlug

Serial neutral interface

Connection (on terminal bases) M12 male, 5 pole –

Functions programming cable UTF-21-FBP, slave

Ethernet

Ethernet connection (on terminal bases) RJ45 RJ45 2x RJ45

Ethernet functions: online Access, ICMP (Ping), DHCP, IP configuration protocol, UDP data exchange, Modbus TCP, HTTP (integrated Web

server), IEC60870-5-104 remote control protocol,

MQTT, SNTP ( Time synchronization), FTP server, SMTP client, Socket programming

Ethernet based Fieldbus

Ethernet connection (on CPU module) – 4 x RJ45 (2x inter faces with 2-port switch)

Downloadable protocols like: PROFINET IO RT Controlle r / EtherC AT Master or Ethernet e.g. Modbus TCP client/server

CPU display LC display and 8 function keys –

Function RUN / STOP, status, diagnosis Status, diagnosis

RUN / STOP, RESET push buttons –

LEDs for various status display –

Timers / Counters unlimited / unlimited

Approvals See detailed page 238 or www.abb.com/plc

(1) e.g. C S31 Fieldbu s: up to 31 stat ions with up to 1 20 DIs / 120 DO s or up to 32 AI s / 32 AOs per station.

– Yes, 4 GB Flash non removable



 /  / 



communication depending on FieldBusPlug used (PROFIBUS DP, CANopen, DeviceNet)

  

–

