ABB Ability, Advant Installation Manual
SYSTEM VERSION 6.1
ABB Ability™ System 800xA / Advant® OCS
Control Builder A 1.4
Installation
SYSTEM VERSION 6.1
ABB Ability™ System 800xA / Advant® OCS
Control Builder A 1.4
Installation
Document Number: 3BSE066174R301
Document Revision: A
Release: April 2019
Trace back information Main Publication:
Tool version: 5.2.025
Build date: 2019-04-10 at 09:54:08
Domain: ABBPA
Workspace, version, checked in: Control Builder A, a52, 2019-04-10
Master: ix-388808-Control Builder A 1.4 Installation.xml
Recipe: ix-389038-Control Builder A 1.4 Installation.rcp
PDF stylesheet: ix-315381-PDF-Stylesheet.xml
Customer stylesheet: ix-315380-CustomerStylesheet.xml
Notice
This document contains information about one or more ABB products and may include a description of or a reference
to one or more standards that may be generally relevant to the ABB products. The presence of any such description of
a standard or reference to a standard is not a representation that all of the ABB products referenced in this document
support allof the features of the described or referenced standard. In order to determine the specific features supported
by a particular ABB product, the reader should consult the product specifications for the particular ABB product.
ABB may have one or more patents or pending patent applications protecting the intellectual property in the ABB
products described in this document.
The information in this document is subject to change without notice and should not be construed as a commitment
by ABB. ABB assumes no responsibility for any errors that may appear in this document.
Products described or referenced in this document are designed to be connected, and to communicate information and
data via a secure network. It is the sole responsibility of the system/product owner to provide and continuously ensure
a secure connection between the product and the system network and/or any other networks that may be connected.
The system/product owners must establish and maintain appropriate measures, including, but not limited to, the
installation of firewalls, application of authentication measures, encryption of data, installation of antivirus programs,
and so on, to protect the system, its products and networks, against security breaches, unauthorized access, interference,
intrusion, leakage, and/or theft of data or information.
ABB Ltd and its affiliates are not liable for damages and/or losses related to such security breaches, any unauthorized
access, interference, intrusion, leakage and/or theft of data or information.
ABB verifies the function of released products and updates. However system/product owners are ultimately responsible
to ensure that any system update (including but not limited to code changes, configuration file changes, third-party
software updates or patches, hardware change out, and so on) is compatible with the security measures implemented.
The system/product owners must verify that the system and associated products function as expected in the environment
they are deployed.
In no event shall ABB be liable for direct, indirect, special, incidental or consequential damages of any nature or kind
arising from the use of this document, nor shall ABB be liable for incidental or consequential damages arising from use
of any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without written permission from ABB, and the
contents thereof must not be imparted to a third party nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed
only in accordance with the terms of such license. This product meets the requirements specified in EMC Directive
2014/30/EU and in Low Voltage Directive 2014/35/EU.
Trademarks
All rights to copyrights, registered trademarks, and trademarks reside with their respective owners.
Copyright © 2019 by ABB.
All rights reserved.
Table of Contents
Table of Contents
About This User Manual
1 Installation of Control Builder A
7General .............................................................................................................
7User Manual Conventions .................................................................................
7Warning, Caution, Information, and Tip Icons ......................................
8Terminology .......................................................................................................
9Released User Manuals and Release Notes ....................................................
111.1 Installation Procedures ......................................................................................
111.1.1 Recommended PC Performance and Capacity ...................................
111.1.2 Software Requirements ......................................................................
131.1.3 CBA Suite Installation ..........................................................................
141.1.4 800xA Common 3rd Party Install .........................................................
141.1.5 Central Licensing System ....................................................................
161.1.6 Control Builder A Products ..................................................................
191.1.7 Manual Installation ...............................................................................
211.1.8 Additional Displays During On-line Builder Installation ........................
231.1.9 Engineering Board setup .....................................................................
241.2 Server and Client Configuration ........................................................................
251.2.1 Server Configuration - DCOM ..............................................................
311.2.2 Client configuration – Engineering Board Setup ..................................
331.3 PU410 External Engineering Board ..................................................................
331.3.1 Introduction ..........................................................................................
341.3.2 PU410 Specification .............................................................................
371.3.3 Mechanical Installation ........................................................................
45Revision History .....................................................................................................
3BSE066174R301 A 5
3BSE066174R301 A 6
About This User Manual
General
About This User Manual
General
Any security measures described in this User Manual, for example, for user access,
password security, network security, firewalls, virus protection, etc., represent possible
steps that a user of an 800xA/Advant OCS® System may want to consider based on
a risk assessment for a particular application and installation. This risk assessment,
as well as the proper implementation, configuration, installation, operation,
administration, and maintenance of all relevant security related equipment, software,
and procedures, are the responsibility of the user of the 800xA/Advant OCS® System.
This user manual describes the installation of Control Builder A.
Control Builder A is a configuration tool for AC 100 and AC 400 Series Controllers. Control
Builder A can be installed in a 800xA system or separate from 800xA.
User Manual Conventions
Microsoft Windows conventions are normally used for the standard presentation of
material when entering text, key sequences, prompts, messages, menu items, screen
elements, etc.
Warning, Caution, Information, and Tip Icons
This User Manual includes Warning, Caution, and Information where appropriate to point
out safety related or other important information. It also includes Tip to point out useful
hints to the reader. The corresponding symbols should be interpreted as follows:
Electrical warning icon indicates the presence of a hazard that could result in electrical
shock.
Warning icon indicates the presence of a hazard that could result in personal injury.
Caution icon indicates important information or warning related to the concept
discussed in the text. It might indicate the presence of a hazard that could result in
corruption of software or damage to equipment/property.
3BSE066174R301 A 7
About This User Manual
Terminology
Information icon alerts the reader to pertinent facts and conditions.
Tip icon indicates advice on, for example, how to design your project or how to use
a certain function
Although Warning hazards are related to personal injury, and Caution hazards are
associated with equipment or property damage, it should be understood that operation
of damaged equipment could, under certain operational conditions, result in degraded
process performance leading to personal injury or death. Therefore, fully comply with all
Warning and Caution notices.
Terminology
A complete and comprehensive list of terms is included in System 800xA Terminology
and Acronyms (3BSE089190*). The listing includes terms and definitions that apply to
the 800xA System where the usage is different from commonly accepted industry standard
definitions.
DescriptionTerm
AC 100
AC 400
Control Builder A
800xA
3BSE066174R301 A 8
Advant Controller 100 - Advant (Master) family of Controllers: AC 55,
AC 70, AC 80, AC 110 and AC 160.
Advant Controller 100 integration into Process Portal A800xA for AC 100
Advant Controller 400 - Advant (Master) family of Controllers: AC 410
and AC 450.
Advant Controller 400 integration into Process Portal A800xA for Advant Master
Control Builder A is a configuration tool used to configure and program
the Advant Controller 100 and Advant Controller 400.
Product containing functionality for efficient control and
supervision of an automated process. Key functions are
presentation of process graphics, process dialogs and
presentation of alarms and trends.
Control Builder A with all its software productsCBA Suite Installation
About This User Manual
Released User Manuals and Release Notes
Released User Manuals and Release Notes
Table: Related Documentation
DescriptionTitle
System 800xA 6.0 Licensing Information
(2PAA111691-600)
Application Builder User’s Guide (3BDS100560*)
Function Chart Builder User’s Guide
(3BDS100595*)
On-line Builder User’s Guide (3BDS100596*)
On-line Builder Reference Manual (3BSE001974*)
Bus Configuration Builder User’s Guide
(3BDS100312*)
PROFIBUS Library Editor User’s Guide
(3BDS100603R201)
AMPL Configuration Advant Controller 100 Series
Reference Manual (3BSE009626R501)
AMPL Configuration Advant Controller 400 Series
Reference Manual (3BSE002417R601)
Source Code Handling User's Guide
(3BSE003838R101)
Control Builder A 1.4 Release Notes
(3BSE080911*)
Provides information about Central Licensing
System (CLS).
This book describes the Application Builder (APB).
This book describes the Function Chart Builder
(FCB).
This book describes the On-line Builder (ONB).
This book describes the functions of On-line
Builder (ONB).
This book describes the Bus Configuration Builder
tool of the Control Builder A product.
This book describes the utility PROFIBUS Library
Editor of Control Builder A
This manual describes the AC 100 engineering
workflow.
This manual describes the AC 400 engineering
workflow.
This manual describes how to use source code
for Function Chart Builder.
This release notes describes new and changed
functions of Control Builder A 1.4
A complete list of all User Manuals and Release Notes applicable to System 800xA is
provided in System 800xA Released User Documents (3BUA000263*).
3BSE066174R301 A 9
3BSE066174R301 A 10
1 Installation of Control Builder A
1.1 Installation Procedures
1 Installation of Control Builder A
1.1 Installation Procedures
1.1.1 Recommended PC Performance and Capacity
Recommended performance and capacity of the PCs for different node types can be
found through http://www.abb.com/product/us/9AAC171278.aspx.
If PU410 is used, a separate Network interface is required in the personal computer.
1.1.2 Software Requirements
McAfee VirusScan® Enterprise and Symantec Endpoint Protection (SEP) have been
tested and are qualified virus scanners for use with Control Builder A.
The user should make sure that the installation procedure completes without exposing
the computers to malware or malicious network traffic of any sort.
This can only be done by limiting the communication to the system and by performing
separate virus scanning of any portable media or disks before connecting them to the
system nodes during the installation. After completing the system installation and
configuration (post installation) it is recommended to perform a full virus scan of all
computers in the system.
Table 1.1: Server Operating Systems
System
Version
6.1
3BSE066174R301 A 11
Operating System version
Windows Server 2016 LTSB
Standard/Datacenter
Windows Server 2012 R2
Standard/Datacenter Update
1. 64-bit Versions to be used
1
Required Hotfixes and additional
Comments
Server with Desktop Experience. Install
the latest qualified update as per Third
Party Security Updates Validation
Status for System 800xA,
3BSE041902.
1 Installation of Control Builder A
1.1 Installation Procedures
Table 1.2: Client Operating Systems
System
Version
Operating System version
Windows 10 Enterprise 2016
LTSB
Windows 10 IoT Enterprise 2016
LTSB
6.1
Windows 10 Enterprise 2015
LTSB
Windows 10 IoT Enterprise 2015
LTSB
Windows 8.1 Update
Professional/Enterprise
1. 64-bit Versions to be used
Table 1.3: Prerequisite Software
System
Version
Required Software (Included on the CBA Media)
ABB 800xA Common 3rd Party Install
6.1
ABB Central Licensing System (CLS) has to be installed
1
Required Hotfixes and additional
Comments
Install the latest qualified update as
per Third Party Security Updates
Validation Status for System 800xA,
3BSE041902.
3BSE066174R301 A 12
1 Installation of Control Builder A
1.1 Installation Procedures
1.1.3 CBA Suite Installation
1. Log on the computer as a user with administrator privileges.
2. Insert the Control Builder A installation media and the Autorun display is seen as
shown in Figure 1.1.
Figure 1.1: Control Builder A autorun display
3BSE066174R301 A 13
1 Installation of Control Builder A
1.1 Installation Procedures
3. If the Autorun display does not appear, double click on the autorun.exe located in
the root of the Control Builder A installation media.
4. Click on Release Notes in the upper right of the Autorun display to get information
about Control Builder A.
Click on CBA Suite Installation and the menu as shown in Figure 1.2 appears:
Figure 1.2: Autorun display with CBA Suite Installation selected.
1.1.4 800xA Common 3rd Party Install
800xA Common 3rd Party Install should be installed before any other installation. Click
on Install 800xA Common install to proceed.
1.1.5 Central Licensing System
Click on Install Central Licensing System to install 800xA Central licensing system.
For a single Engineering Station it is recommended to select a standalone installation,
which will not require enabling of Internet Information Services (IIS) components.
More information on Central Licensing System (CLS) is available in System 800xA 6.0
Licensing Information (2PAA111691-600) .
3BSE066174R301 A 14
1 Installation of Control Builder A
1.1 Installation Procedures
Three different licenses for Control Builder A:
• FCB_AC100
One licence is required for each PC running Function Chart Builder with node type
AC 100, e.g. AC 55, AC 70, AC 110 or AC 160.
• FCB_AC400
One licence is required for each PC running Function Chart Builder with node type
AC 400.
• ONB
One licence is required for each PC running On-line Builder.
Load Control Builder A licenses (.SLA file) into the licensing system with the ABB
License Entry tool:
In the ABB start menu choose ABB System 800xA > System > Licensing > License
Entry and then File > Load / Replaces Licenses.
Figure 1.3 shows an example of CBA licenses as presented in ABB Licence Entry tool:
Figure 1.3: CBA licenses in the ABB License Entry tool
3BSE066174R301 A 15
Loading...