Delta 403 User Manual

Size:
3.66 Mb
Download

SINGLE HANDLE KITCHEN FAUCETS

 

U

 

®

P

C

®

ASME A112.18.1 / CSA B125.1

Models 100, 102, 103, 140, 141, 180, 300, 302, 340, 400, 402, 403, 440, 441, 480, D111 & D411 Series

Write purchased model number here.

You may need the following tools:

For easy installation of your faucet you will need:

To READ ALL the instructions completely before beginning.

To READ ALL warnings, care, and maintenance information.

To purchase the correct water

supply hook-up.

SILICONE

SILICONE

?

50242 Rev. C

1

11/1/08

TABLE OF CONTENTS:

Warranty -------------------------------------------------------------

Page 2

Installation Instructions -----------------------------------------------

Pages 3-8

Maintenance --------------------------------------------------------

Page 9

Replacement Parts --------------------------------------------------

Pages 10-17

Lifetime Faucet and Finish Limited Warranty

All parts and finishes of the Delta® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for as long as the original consumer purchaser owns their home. Delta Faucet Company recommends using a professional plumber for all installation & repair.

Delta will replace, FREE OF CHARGE, during the warranty period, any part or finish that proves defective in material and/or workmanship under normal installation, use & service. Replacement parts may be obtained by calling 1-800-345-DELTA (in the U.S. and Canada) or by writing to:

In the United States:

Delta Faucet Company Product Service

55 E. 111th Street Indianapolis, IN 46280

In Canada: Masco Canada

Technical Service Centre 420 Burbrook Place London, ON N6A 4L6

This warranty is extensive in that it covers replacement of all defective parts and even finish, but these are the only two things that are covered. LABOR CHARGES AND/OR DAMAGE INCURRED IN INSTALLATION,

REPAIR, OR REPLACEMENT AS WELL AS ANY OTHER KIND OF LOSS OR DAMAGES ARE EXCLUDED. Proof of purchase (original sales receipt) from the original consumer purchaser must be made available to Delta for all warranty claims.THIS IS THE EXCLUSIVE WARRANTY BY DELTA FAUCET COMPANY, WHICH DOES NOT MAKE ANY OTHER WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY.

This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby extended a five year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty.This warranty is applicable to Delta® faucets manufactured after January 1, 1995.

Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Any damage to this faucet as a result of misuse, abuse, or neglect, or any use of other than genuine Delta® replacement parts WILL VOID THE WARRANTY.

This warranty gives you specific legal rights, and you may also have other rights which vary from state/province to state/province. It applies only for Delta® faucets installed in the United States of America, Canada, and Mexico.

© 2008 Masco Corporation of Indiana

2

1Deck Mount

1

Deck Mount

1

Single Hole Mount

1

2

Preparing for Installation

SHUT OFF WATER SUPPLIES

Remove old faucet. For deck mount models place gasket (1) on faucet. For single hole mount models, place base (1) then gasket (2) on faucet.

For models without spray, go to Step 3. For models with spray,go to Step 2.

NOTE: Thick tile 2 1/2" mounting kits available.

140,180, 340, 440 & 480 Series–

RP30393.

103, 141, 403 & 441 Series–

RP30394.

3

2

3

2

1

2

Sprayer Installation For models with spray and spray support.

3

2

1

2

Mount the spray support assembly (1) in far right hole in sink. Hand tighten nut. Insert spray hose (2) down through support assembly and up through center

hole on sink. Snap quick connect spray hose (2) onto spray hose nipple (3). Pull down moderately to ensure connection has been made. Go on to Step 2.

4

3

1

2

Sprayer Installation

For models with integrated spray.

Insert spray hose (1) down through support assembly on escutcheon and hole in sink. From underneath the sink place the mounting nut (2) over spray hose and insert the hose up through the middle hole

in sink. From above the sink, snap the quick connect spray hose (1) onto the spray hose nipple (3) with quick connect fitting. Pull down moderately to ensure connection has been made.

5

3

Deck Mount

Single Hole Mount

 

 

 

1

2

1 2

2

2

2

Faucet Installation

For deck mount models.

Feed tubes (1) down through center hole in sink. OPTION: If sink is

uneven, use silicone sealant under the gasket. Secure faucet to sink

with nuts/washers or mounting nuts (2) supplied with your faucet.

For single hole mount models.

Feed tubes (1) down through center hole in sink. OPTION: If sink is uneven, use silicone sealant under the gasket. Secure faucet to sink with mounting bracket, spacer (for thin mount only) and nut (2) supplied with your faucet.

6

4A.

1/2" (12.70mm) IPS

3

12

B.

2 1

Supply Line Connections

For models with fittings. For models without fittings.

A.Note: Be careful when bending the copper tubing. Kinked tubes will void the warranty. Choose hook-ups for 1/2" I.P.S. connections: (1) Ball nose riser (3/8" O.D. copper tubing), or (2) 1/2" I.P.S. faucet connector. Use the enclosed coupling nuts (3) with the ball nose risers

(1). Coupling nuts are not included with D111, D311 or D411 Series. Important:

Use two wrenches when tightening. Do not overtighten.

B.Note: Be careful when bending the copper tubing. Kinked tubes will void the warranty. Solder connections

(1) or use compression fittings (2) for 3/8" O.D. (1/4" nominal) copper tubing.

7

5 2

1

3

Flush the System and Check for Leaks

Remove aerator (1) and turn faucet handle (2) to the full on mixed position. Turn on hot and cold water supplies (3) and flush water lines for one minute.

Important:This flushes away any debris that could cause damage to internal parts.

Check all connections at arrows for leaks. Re-tightenif necessary, but do not overtighten.

8

1/8" (3.18mm)

1

5

3

2

4

7

6

Maintenance

If faucet leaks from under handle:

Remove handle and ensure cap (1) is tight.

If leak persists–SHUT OFF WATER SUPPLIES. Replace Ball Assembly

(2)–RepairKit RP70 and Cam & Packing

(3)–RepairKit RP61.

If faucet leaks from spout outlet:

SHUT OFF WATER SUPPLIES. Replace Ball Assembly (2)–RepairKit RP70 and Seats & Springs(4)–RepairKit RP4993.

If faucet exhibits very low flow

A.Remove and clean Aerator (5), or

B.SHUT OFF WATER SUPPLIES. Clean Seats and Springs (4) of any debris.

If spray attachment does not function properly:

SHUT OFF WATER SUPPLIES. Remove Diverter Assembly (6) and clean.

If condition persists–SHUT OFF WATER SUPPLIES. Replace Diverter Assembly

(6)–RepairKit RP320.

If faucet leaks from base of spout:

SHUT OFF WATER SUPPLIES. Remove spout and replace Spout O-Rings(7)–RepairKit RP25.

Cleaning and Care

Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel.

9

Notes / Notas / Notes