
Zebra Technologies Corporation
Zebra Technologies Corporation
Innehåll
I förpackningen ............................................................................ 3
Översikt ....................................................................................... 4
Ta ut och sätta in batteri ............................................................. 6
Ladda smartbatteri ....................................................................... 7
UCLI72-4 Quad Charger (AC18177-5) ............................................7
Smart Charger-2 (SC2) laddare för ett batteri (P1031365-063) ..........8
AC nätadapter (ingår i sats art.nr. P1031365-XXX) .............................9
Bilhållare (P1063406-029) ................................................................10
Laddare med fyra platser (P1063406-027) ........................................10
Ladda material (ZQ510 visas) ..................................................... 11
Skrivarkommunikation ............................................................... 12
Via en dator ......................................................................................12
Via Bluetooth (NFC) ..........................................................................12
Via BT/WLAN ....................................................................................12
Skrivarkontroller ........................................................................ 13
Rengöra skrivaren ...................................................................... 14
Tillbehör ..................................................................................... 15
Magkortsläsare .................................................................................15
Tillbehör forts. ........................................................................... 16
Handrem (BT16899-1) ......................................................................16
Axelrem (BT11132-1) ........................................................................16
Mjuk väska (P1063406-037/-038) .....................................................16
Tillbehör forts. ........................................................................... 17
Bältesspänne ....................................................................................17
Produktsupport .......................................................................... 18
Läs alltid databladet Viktig säkerhetsinformation som medföljer alla skrivare och Teknisk
beskrivning som medföljer alla batterier. Dessa dokument ger information om åtgärder för
att säkerställa att skrivaren används på ett pålitligt och säkert sätt.
I förpackningen
ZEBRA PRODUCT REGISTRATION CARD
Register today to receive beneftis including free updates and product protection!
Registrazione via internet
©2013 ZIH Corp.
/
AA18153-104 Rev. B
August 2012
475 Half Day Road, Suite 500
Lincolnshire, IL 60069 USA
T: +1 847.634.6700 or +1 800.423.0442
In the Americas contact:
475 Half Day Road, Suite 500
Lincolnshire, IL 60069 USA
T: +1 847.634.6700 or +1 800.423.0442
In Europe, Africa, the Middle East, and India contact:
Zebra Technologies Europe Limited
Dukes Meadow, Millboard Road
Bourne End
Buckinghamshire SL8 5XF, UK
T: +44 (0)1628 556000
F: +44 (0)1628 556001
120 Robinson Road
#06-01 Parakou Building
Singapore 068913
T: +65 6858 0722
F: +65 6885 0838
AA18153-104
®
Zebra
Wireless Compliance
Information Guide for
ZQ510 and ZQ520
P107xxxx-001 Rev. A
March 2014
333 Corporate Woods Parkway
Vernon Hills, IL 60061-3109 USA
T: +1 847 634 6700
F: +1 847 914 8766
www.zebra.com
May 31, 2011
Technical Bulletin: Battery Management and Safety Practices for Lithium Ion Battery Packs
Lithium ion (Li-Ion) technology is the state-of-the-art in DC energy storage and has been widely
adopted to meet user demand for more power and longer operating times. No other battery
technology available at this time allows Zebra to meet market and competitive requirements for
operating times and label capacity for thermal printers. Zebra actively monitors the Li-Ion battery
technology industry and we have become aware of published concerns about Li-Ion batteries,
including batteries for laptop computers, cell phones, digital cameras, wireless speakerphones
and numerous other products.
Although Li-Ion technology is state-of-the-art, its use does come with a tradeoff: the design and
manufacture of Li-Ion batteries has not yet reached a level that guarantees performance under all
circumstances and that batteries will never overheat or out-gas. Theref
understand and follow proper and safe practices for the use, storage, disposal; handling; and
charging of Li-Ion batteries. Failure to follow safe practices may result in bodily injury and/or
property damage.
While our battery manufacturers have made significant improvements from a design and
manufacturing process perspective, we strongly recommend that you implement the following
battery management practices to further reduce any residual risk of overheating and/or outgassing:
I. Use, Storage and Disposal
1. Only use genuine Zebra® battery packs in Zebra printers.
2. Our experience indicates that the incidence of failure may increase with battery service life due
to the stresses of daily charging and discharging. We strongly recommend that Li-Ion batteries be
replaced after one year’s daily service, or 600 charge-discharge cycles, whichever occurs first.
3. In the unused state, a Li-Ion battery pack may become unstable if the voltage drops below 4.6
volts. The printer will shut down before a battery reaches this voltage, but a battery may further
self discharge below 4.6 volts if it is left in the discharged state for more than a few weeks. We
recommend periodic use of a voltmeter to check such batteries before recharging. If the voltage of
any battery pack drops below 4.6 volts, the batte
4. Keep battery packs and chargers away from combustible materials.
5. Do not store battery packs in temperatures exceeding 60ºC/140ºF and do not store the battery
packs in direct sunlight.
6. Keep battery packs away from children.
7. Promptly and properly dispose of used battery packs according to local regulations for the
disposal of batteries. Before disposal, you should insulate the terminals with tape.
Zebra voluntarily participates in the RBRC program. Call 1-800-8-BATTERY in North
America for information on recycling. Outside of North America, please follow local battery
recycling guidelines.
AA18298-002 Rev. C
ry pack should be discarded.
ore, it is important to
Fungerar med:
Certifierad:
54
IP
sid. 2 P1064720-211 Rev. A
MIL-STD
810
P1064720-211 Rev. A sid. 3

Smart Charger-2 (SC2) laddare för ett batteri (P1031365-063) AC nätadapter (ingår i sats art.nr. P1031365-XXX)
Laddningsstatus
Batteristatus
När SC2 är inkopplad men inget batteri finns, är laddningsstatusLED-indikeringen grön.
Fulladdat Laddar Ej tillämpl. Fel
God Minskad
kapacitet
Uttjänt Oanvändbart-
byt batteri
(Gummidörr visas inte)
Batterierna levereras oladdade. Ta fram batterierna från
skyddsförpackningen och ladda dem fullt innan de används
första gången.
Det går att ladda batteriet medan skrivaren används, men
laddningstiden ökar i det fallet.
sid. 8 P1064720-211 Rev. A
P1064720-211 Rev. A sid. 9

Skrivarkommunikation
Via en dator
Skrivarkontroller
LAN
Via Bluetooth (NFC) Via BT/WLAN
http://www.zebra.com/nfc
Spänning
Grön LED Laddat batteri/
Data
batterieliminator används
Spänning
Fast gul LED: Laddar
Material
Blinkande gul LED: Viloläge
Spänning
Röd LED: Batterifel
Lucka öppen
Bluetooth Batteri
WiFi-anslutning Batterieliminator
WiFi signalstyrka Välj
Fel Materialmatning
sid. 12 P1064720-211 Rev. A
P1064720-211 Rev. A sid. 13

Rengöra skrivaren
Tillbehör
Zebra rengöringspenna
70 % isopropylalkohol
Borste
Blås rent
Kantsensor
Platenyta
Skrivhuvudets
delar
Mellanrumssensor
Avrivningskant
Magkortsläsare
T 4.7 +/- 1 tum. pund.
1
2
Område Rengöringssätt Intervall
Efter var femte materialrulle (eller oftare, vid behov).
Skrivhuvud
Platenyta
Scraper
(Endast Linerlessenheter)
Avrivningsskant Vid behov
Utsida Vid behov
Insida
Insida på enheter med
Linerless platenrulle
Vid användning av linerless-material krävs rengöring
efter varje materialrulle.
Efter var femte materialrulle (eller oftare, vid behov)
Linerless-material kräver rengöring oftare, dvs. efter
varje rulle.
Efter var femte materialrulle (eller oftare, vid behov).
Vid behov
Efter var femte materialrulle (eller oftare, vid behov).
3
4
sid. 14 P1064720-211 Rev. A
P1064720-211 Rev. A sid. 15

Produktsupport
Zebra Technologies Corporation
475 Half Day Road, Suite 500
Lincolnshire, IL
Zebra Technologies Corporation
475 Half Day Rd., Suite 500
Lincolnshire, Illinois 60069 USA
Tel: +1 847.634.6700
Tel: +1 866.230.9494 (endast USA)
Zebra Technologies Europe Limited
Dukes Meadow
Millboard Road
Bourne End
Buckinghamshire SL8 5XF, England
Tel: +44 (0)1628 556000
Zebra Technologies Asia Pacific, Pte. Ltd.
Regionalt säljkontor Asien och Stilla Havsområdet
71 Robinson Road #05-02/03
Singapore 068895
Tel: +011 65 6858 0722
el: +1 847 634 6700 eller +1 800 423 0442
sid. 18 P1064720-211 Rev. A
60069 USA