19-KEY MECHANICAL KEY-
OPERATING INSTRUCTIONS
2 19-key Mechanical Keypad
© 2015 ZIH Corp.
Zebra reserves the right to make changes to any product to improve
reliability, function, or design.
Zebra does not assume any product liability arising out of, or in
connection with, the application or use of any product, circuit, or
application described herein.
No license is granted, either expressly or by implication, estoppel, or
otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process
in which Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra products.
Zebra and the stylized Zebra head are trademarks of ZIH Corp.,
registered in many jurisdictions worldwide. All other trademarks are the
property of their respective owners. ©2015 ZIH Corp and/or its affiliates.
All rights reserved.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http://www.zebra.com/warranty.
Operating Instructions 3
Introduction
This guide provides keypad operating information for the MC3000 mobile
computer with the 19-key mechanical keypad. All other operating
instructions are provided in the MC3000 User Guide, p/n 72-E-68899-xx,
and the MC3000 Integrator Guide, p/n 72E-68900-xx.
Turning the Mobile Computer On and Off
Simultaneously press the and
computer on and off.
keys to turn the mobile
Booting the Mobile Computer
To perform a warm boot:
1. Press and hold the and keys and then press the and
keys.
2. As soon as the mobile computer starts to perform a warm boot
release the keys.
To perform a cold boot:
1. Press and hold the and keys and then press the and
keys.
2. Release the keys. The mobile computer performs a cold boot.
4 19-key Mechanical Keypad
Keypad Description
The table below lists the default functions of each key. The functionality
of the keys can be re-mapped, see Keypad Mapping on page 5.
Key Description
Menu Produces the lower case alphabetic f.
Turns the mobile computer on and off when
simultaneously pressed with the down arrow key. See
Booting the Mobile Computer on page 3
and cold boot procedures.
GoTo Produces the lower case alphabetic e.
Alphabetic Produces the lower case alphabetic l, d and p
characters.
Numeric Produces numerics 0 through 9.
for warm
C Produces a backspace.
Scroll Up and Down Moves up and down from one item to another.
Increases/decreases specified values.
ENTER
ENTER
key executes a selected item or function.
Operating Instructions 5
Keypad Mapping
The 19-key mechanical keypad has the following keypad mapping.
Menu
GoTo
L
D
P
1
2
Key
Default
State
f70102
e69 101
l76108
d68 100
p80 112
149 49
250 50
VK Code
(Decimal)
ASCII Value
(Decimal)
3
4
351 51
452 52
6 19-key Mechanical Keypad
Key
5
6
7
8
9
0
C
Default
State
553 53
654 54
755 55
856 56
957 57
048 48
Backspace 8 8
VK Code
(Decimal)
ASCII Value
(Decimal)
Operating Instructions 7
Key
ENTER
Up Arrow
Down Arrow
Default
State
Enter 13 13
Up 38 -
Down 40 -
VK Code
(Decimal)
ASCII Value
(Decimal)
72-94716-02 Rev A - April 2015
Service Information
Before using the device, it must be configured to operate in your facility’s
network and run applications.
If you have a problem running the device or using the equipment, contact
your facility’s Technical or Systems Support. If there is a problem with the
equipment, they will contact the Zebra Customer Interactive Center at:
http:www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Zebra Technologies Corporation
Lincolnshire, IL U.S.A
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective
owners.
©2015 ZIH Corp and/or its affiliates. All rights reserved.
Loading...