Zebra LI2208 Quick Start Guide

LI2208 LINEAR IMAGER

SET DEFAULTS / ENTER KEY BAR CODES

TAB KEY BAR CODE

QUICK START GUIDE

http://www.zebra.com/li2208

See Product Reference Guide
for detailed information

SET DEFAULTS

RETURN TO FACTORY DEFAULTS

ADD AN ENTER KEY
(Carriage Return/Line Feed)

To add an Enter key after scanned data, scan
the bar code below.

ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)

ADD A TAB KEY

To add a Tab key after scanned data, scan
the bar code below.

ADD A TAB KEY

POST IN WORK AREAPOST IN WORK AREA

SCANNER FEATURES

1

2

PRESENTATION MODE

USB CAPS LOCK OVERRIDE BAR CODE

USB - OVERRIDE CAPS LOCK KEY (ENABLE)

3

4

*USB - DO NOT OVERRIDE CAPS LOCK KEY (DISABLE)

1 Scan Window
2 Scan Trigger
3 LED
4 Beeper

STEP 1 - CONNECT HOST INTERFACE

USB

NOTE: Cables may vary depending on configuration

STEP 2 - SET UP INTERFACE

(

Scan Host Bar Codes

USB

Scan ONE of the bar codes below

The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.

)

RS-232

*USB KEYBOARD (HID)

USB CDC Host

IBM TABLE TOP USB

IBM HAND-HELD USB

SNAPI WITHOUT IMAGING

RS-232
Scan ONE of the bar codes below

The interface cable automatically detects the host interface type and uses the
default setting. If the default (*) does not meet your requirements, scan another
host bar code below.

IBM OPOS (IBM HAND-HELD USB with FULL SCAN ENABLE)

SIMPLE COM PORT EMULATION

TOSHIBA TEC Host

Keyboard Wedge

*STANDARD RS-232

ICL RS-232

NIXDORF RS-232 MODE A

Keyboard Wedge
Scan a bar code below

The Auto-Host Detect Cable feature automatically detects the host interface type
and uses the default setting. If the default (*) does not meet your requirements,
scan the IBM PC/AT and IBM PC COMPATIBLE bar code below.

NIXDORF RS-232 MODE B

FUJITSU RS-232

OPOS/JPOS

IBM 46XX

*IBM AT NOTEBOOK

IBM PC/AT and IBM PC COMPATIBLE

IBM 46XX
Scan ONE of the bar codes below

The Auto-Host Detect Cable feature automatically detects the host interface type,
but there is no default setting. Scan one of the bar codes below to select the
appropriate port.

NON-IBM SCANNER EMULATION (PORT 5B)

HAND-HELD SCANNER EMULATION (PORT 9B)

TABLE-TOP SCANNER EMULATION (PORT 17)

ABOUT 123Scan

2

123Scan2 is an easy-to-use, PC-based software tool
that enables rapid and easy customized setup of
a scanner via a bar code or USB cable.
For more information,
visit: http://www.zebra.com/123Scan.

2

123Scan

UTILITY FUNCTIONALITY

- Device Configuration

- Electronic Programming (USB Cable)

- Programming Bar Code(s)

- Data View – Scan Log (Display Scanned Bar Code Data)

- Access Asset Tracking Information

- Upgrade Firmware and View Release Notes

- Remote Management (SMS Package Generation)

LI2208 LINEAR IMAGER

Дане обладнання відповідає вимогам технічного регламенту №1057, № 2008 на обмеження щодо
використання деяких небезпечних речовин в електричних та електронних пристроях.

POST IN

WORK AREA

RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE

Avoid Extreme Wrist Angles Avoid ReachingAvoid Bending

WRIST ANGLES

SCANNING

Aiming

012345 012345

AVOID BENDING

AVOID REACHING

BEEPER INDICATIONS LED INDICATIONS

Indication

Power up Low/medium/high beep

Bar code decoded

Transmission error detected; data is ignored

Correct programming sequence performed

Incorrect programming sequence, or Cancel
bar code scanned

Beeper Sequence

Short high beep

4 long low beeps

High/low/high/low beepSuccessful parameter setting

High/low beep

Low/high beep

Transmission error

No power to scanner

Scanner is ready to scan

Bar code is successfully decoded

Transmission error

TROUBLESHOOTING

Hand-Held Scanning

Indication LED Indicator

OffScanner is on and ready to scan, or no power to scanner

GreenBar code is successfully decoded

Red

Hands-Free (Presentation) Scanning

Off

Green

Off Momentarily

Red

Local Contact:

Scanner not working

No power to scanner

Scanner is disabled

Check system power.

Ensure that correct host
interface cable is used.

Scanner decoding bar code, but data not transmitting to host

Host interface not configured properly

Interface cable is loose

©2016 Symbol Technologies LLC, a subsidiary of Zebra Technologies
Corporation. All rights reserved.

Zebra reserves the right to make changes to any product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any
product, circuit, or application described herein. No license is granted, either expressly or by implication,
estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system,
apparatus, machine, material, method, or process in which Zebra products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Zebra products.

Power Supply

Use ONLY a approved UL LISTED ITE (IEC/EN 60950-1, SELV) power supply with electrical ratings: Output
5Vdc, min 850mA, with a maximum ambient temperature of at least 40 degrees C. Use of alternative power
supply will invalidate any approvals given to this unit and may be dangerous.

Warranty

For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty.

For Australia Only.

This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03,
Singapore 068895, Singapore. Our goods come with guarantees that cannot be excluded under the
Australia Consumer Law. You are entitled to a replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and
remedies you may have under the Australian Consumer Law. If you have any queries, please call Zebra
Technologies Corporation at+65 6858 0722. You may also visit our website: http://www.zebra.com for the
most updated warranty terms.

Service Information

If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global Customer Support Center at:
http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.

Waste Electrical and Electronic Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be returned to Zebra for recycling.
For information on how to return product, please go to: http://www.zebra.com/weee.

Bulgarish: За клиенти от ЕС: След края на полезния им живот всички продукти трябва да се
връщат на Zebra за рециклиране. За информация относно връщането на продукти, моля отидете
на адрес: http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich životnosti vrátit spoleènosti
Zebra k recyklaci. Informace o zpùsobu vrácení produktu najdete na webové stránce:

http://www.zebra.com/weee.

Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirkulering, når de er udtjent. Læs
oplysningerne om returnering af produkter på: http://www.zebra.com/ weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie

unter http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi:

http://www.zebra.com/weee.

Español: Para clientes en la Unión Europea: todos los productos deberán entregarse a Zebra al final de
su ciclo de vida para que sean reciclados. Si desea más información sobre cómo devolver un producto,
visite: http://www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de vie doivent être retournés
à Zebra pour recyclage. Pour de plus amples informations sur le retour de produits, consultez :

http://www.zebra.com/weee.

Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web: http://www.zebra.com /weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Zebra
otrreizējai pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu Zebra, lūdzu, skatiet:

http://www.zebra.com/weee.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra vállalathoz kell eljuttatni
újrahasznosítás céljából. A termék visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el

a http://www.zebra.com/weee weboldalra.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van hun levensduur naar Zebra
te worden teruggezonden voor recycling. Raadpleeg http://www.zebra.com/weee voor meer informatie
over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji nale¿y zwróciæ do firmy
Zebra w celu ich utylizacji. Informacje na temat zwrotu produktów znajduj¹ siê na stronie internetowej

http://www.zebra.com/weee.

Português: Para clientes da UE: todos os produtos no fim de vida devem ser devolvidos à Zebra para
reciclagem. Para obter informações sobre como devolver o produto, visite: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de funcţionare, trebuie
returnate la Zebra pentru reciclare. Pentru informaţii despre returnarea produsului, accesaţi:

http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o vrátení výrobkov nájdete na:

http://www.zebra.com/weee.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa

http://www.zebra.com/weee.

Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar produkten finns på http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Zebra'ya iade

edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.

Scan appropriate host
parameter bar codes

Ensure all cable connections
are secure

Scanner not decoding bar code

Scanner not programmed for bar code type

Bar code unreadable

Distance between scanner and bar code incorrect

Scanned data incorrectly displayed on host

Host interface not configured properly

REGULATORY INFORMATION

Regulatory Information

This guide applies to Model Number: LI2208. All Zebra devices are designed to be compliant with rules
and regulations in locations they are sold and will be labeled as required. Local language translations
are available at the following website: http://www.zebra.com/support.

Any changes or modifications to Zebra equipment, not expressly approved by
Zebra, could void the user’s authority to operate the equipment.

Health and Safety Recommendation

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury

follow the recommendations below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your company's safety programs
to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

LED Safety

Classified as ‘EXEMPT RISK GROUP’ according to IEC 62471:2006 and EN 62471:2008.

LED Output

This device contains two LEDs for illumination and aiming.

Aim/Illumination:

Optical Output: 0.87mW
Pulse Duration: Continuous
Emitted Wavelength: 590-650nm

Viewing the LED output with certain optical instruments (for example, eye loupes,
magnifiers and microscopes) may pose an eye hazard.

Caution: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous LED light exposure.

LED light is emitted from this aperture:

Ensure scanner is programmed to read
type of bar code being scanned.

Ensure bar code is not defaced; try scan­ning test bar code of same bar code type.

Move scanner closer to, or further
from bar code.

Scan appropriate host parameter bar codes.

Radio Frequency Interference Requirements -FCC

may cause harmful interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Marking and European Economic Area (EEA)

Statement of Compliance

Zebra hereby declares that this device is in compliance with all applicable Directives, 2014/30/EU,
2014/35/EU and 2011/65/EU. The full text of the EU Declaration of Conformity is available at the
following internet address: http://www.zebra.com/doc.

Other Countries

Japan (VCCI) - Voluntary Control Council for Interference

Class B ITE

Korea Warning Statement for Class B ITE

Ukraine

China RoHS

This table was created to comply with China RoHS requirements.

(Parts)

金属部件

(Metal Parts)

电路模块

(Circuit Modules)

电缆及电缆组件

(Cables and Cable Assemblies)

塑料和聚合物部件

(P lastic and Polymeric Parts)

光学和光学组件

(Optics and Optical Components)

电池

(Batteries)

本表格依据SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量

要求以下。

X: 表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572 规定

的限量要求。(企业可在此处，根据实际情况对上表中打“×”的技术原因进
行进一步说明。）

This table was created to comply with China RoHS requirements.

Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,

http://www..com/ds6878

有害物质

汞 镉

铅

(Pb) (Hg)

X O O O O O

X

O

O

O O O

O O O O OO

X

O O

O

O

(Cr (VI))

(Cd)

O O O O

O

O

多溴联苯

(PBB) (PBDE)

O O O

多溴二苯醚部件名称

O O

O O

•

B

TURKISH WEEE Statement of Compliance

EEE Yönetmeliğine Uygundur

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com

Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many
jurisdictions worldwide. All other trademarks are the property of their respective
owners.
©2017 Symbol Technologies LLC, a subsidiary of Zebra Technologies Corporation. All
rights reserved.

@72-170536-04@

72-170536-04 Revision A March 2017

LI2208 LINEAR IMAGER