Zanussi ZWD1271 User Manual

WASHER-DRYER

ZWD 1271 W ZWD 1471 W ZWD 1471 S

Cottons

Synthetics

Cotton daily

Delicate

Wool/ Handwash

JETSYSTEM

1200

6 kg

60°C 50°C

95°C

40°C

1200 900 700 500

ZWD 1271 W

Skip

Prewash

30°C

Extra Dry

Store Dry

Iron Dry

Cottons

Synthetics

Cottons

Store Dry

Synthetics

Rinse Hold

Extra Quick

Fabrics Temperature Spin Speed Options

Auto Dry

Drying Time

Start/Pause

Reset

On/Off

Rinse

Drain

Spin

Wash

Prewash

Drying

40° AA

INSTRUCTION BOOKLET

132985330

Quick Installation Guide:

visit our WEB SITE to view an install video

www.video.uk.electrolux.com

Installation

●

This appliance is heavy. Care should be taken when moving it.

●

It is dangerous to alter the specifications or attempt to modify this product in any way.

●

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

●

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

●

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

●

Always be sure, that there is no water leakage from hoses and their connections after the installation

Child Safety

●

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●

Pets and children have been known to climb into washer-dryers. Please check your drum before use.

●

The glass door becomes very hot during the washing and drying cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

●

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s reach.

Use

●

Always unplug the appliance and turn off the water supply after use.

●

Do not overload the appliance. See relevant section in the instruction book.

●

Only wash and dry fabrics which are designed to be machine washed and dried. If in doubt, consult the care label on the clothes.

●

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

●

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

●

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

●

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

●

As some duvets and eiderdowns should be washed/dried in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

●

The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing.

●

Never tumble dry items that have had contact with chemicals such as dry cleaning fluid.These are of a volatile nature and could cause an explosion.

Only tumble dry items which have been washed in water or require airing.

●

Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to wash-through-to-dry you should use the conventional detergent dispenser drawer.

●

Leave the porthole door slightly ajar between washes to preserve the door seal.

●

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Furthermore, it will invalidate your guarantee. Contact your local Service Force Centre. Always insist on genuine spare parts.

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Contents

For the User

Important Safety Information

Your New Washer-Dryer

Description of the Appliance

5 Detergent dispenser drawer 5 Child safety feature 5

The Control Panel

6-10

Operating sequence

11-14

Washing 11 Load the laundry 11 Measure out the detergent 11 Measure out the fabric softener 11 Switch the machine on 11 Select the required programme/fabric 11 Select the temperature 12 Select the spin speed or the “Rinse Hold” option 12 Select the desired options 12 Select the “Delay” 12 Start the programme 12 How to change an option or a programme

during its cycle 13 How to cancel a programme during its cycle 13 How to open the door during the cycle of

a programme 13 End of programme 13

Drying 3 kg of cotton 14

Autodrying 2 kg of synthetics 14

Washing and Drying Hints

Which detergent to use?.... 16

And in which form? 16

Wash Care Symbols

Washing Programmes

Drying Programmes

Maintenance and Cleaning

20-21 Descaling 20 After each wash 20 Maintenance wash 20 External cleaning 20 Cleaning the dispenser drawer 20 Cleaning the drawer recess 20 Cleaning the filter 20-21 Cleaning the water inlet filter 21 The dangers of freezing 21 Emergency emptying out 21

Something Not Working

22-23

Service and Spare Parts

Guarantee Conditions

For the Installer

Installation Instructions

Technical Specifications

25 Unpacking 26 Positioning 26 Water inlet 27 Water drainage 27-28 Levelling 28 Special conditions 28 In the interest of the environment 28 Electrical connection 29

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions Hints and tips Environmental information

Your New Washer-Dryer

This new machine, which is fitted with the New Jet System, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

●

The special wool programme with its new delicate wash system treats your woollens with extreme care.

●

The balance control device ensures that the machine remains stable when spinning.

●

Automatic cooling of the wash water to 60°C

before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

●

The two drying programmes will give your wash that soft, relaxed feel whatever the weather.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

●

Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.

●

Select the “Extra Quick” or the “40° AA” option for lightly soiled laundry.

●

A programme without prewash is sufficient for normally soiled laundry.

●

Try to load the maximum drying capacity of the machine as small loads are uneconomical.

●

Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.

In the interest of the environment

●

Materials marked with the symbol are recyclable.

●

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

●

Help to keep your country tidy - use authorised disposal sites for your old appliance.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".

Description of the Appliance

1 Detergent dispenser drawer

2 Control Panel

3 Door opening handle

4 Drain pump

5 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

Child safety feature

This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.

Cotton daily

95°C

Cottons

60°C

Synthetics

50°C

Delicate

40°C

Wool/

30°C

Handwash

Fabrics Temperature Spin Speed Options

ZWD 1271 W

Cottons

Extra Dry

Prewash

1200 900

40° AA

700

500

Extra Quick

Rinse Hold

Prewash

Store Dry

Wash

Iron Dry

Rinse

Cottons

Synthetics

Spin

Skip

Synthetics

Store Dry

Drain Drying

Reset

Start/Pause

Drying Time

Auto Dry

On/Off

6 kg

JETSYSTEM

1200

C0063

P1131

The Control Panel

4 “Temperature” button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the machine. The relevant light will light up. Maximum temperatures are 95°C for Cottons and “Cotton daily” programme, 60°C for Synthetics, 40°C for delicate fabrics, Wool and fabrics to be handwashed (Wool / Handwash programme).

5 “Spin Speed” button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the machine. The relevant light will light up.

Maximum speeds are:

• for cotton: 1,400 rpm (ZWD 1471 W - 1471 S) 1,200 rpm (ZWD 1271 W);

• for synthetic fabrics, wool and fabrics to be hand-

washed: 900 rpm;

• for delicate fabrics: 700 rpm.

“Rinse Hold” position: when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry.

At the end of the cycle, the “Start/Pause” button light goes off, the “Rinse Hold” button light remains lit to indicate that the water must be drained and a flashing zero will appear on the display.

To complete the cycle press the “Skip/Reset” button once, so as to cause all the lights to go off; the display will show three blinking dashes.

1 On/Off button

Press this button to switch the machine on. The display (9) will show three blinking dashes or a blinking zero. You will find more detailed explanations on page 7 and 8 (see “Display”). Press the “On/Off” button again to switch the machine off.

2 MAINS-ON light

This light is connected to the “On/Off” button. It lights up when you press the button, and goes out when you press it again.

3 “Fabrics” button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.

Cotton daily

To be used for lightly soiled cotton items in order to obtain a good washing performance in a short time.

Wool / Handwash

When you select this programme, you obtain a particularly delicate wash, suitable for articles of clothing whose label indicates that they must be handwashed .

12 3 4 5 6 7 8910 111213

Cottons

Synthetics

Cotton daily

Delicate

Wool/ Handwash

60°C

50°C

95°C

40°C

1200

900

700

500

Delay

ZWD 1271 W

Skip

Prewash

30°C

Extra Dry

Store Dry

Iron Dry

Cottons

Synthetics

Cottons

Store Dry

Synthetics

Rinse Hold

Extra Quick

Fabrics Temperature Spin Speed Options

Auto Dry

Drying Time

Start/Pause

Reset

On/Off

Rinse

Drain

Spin

Wash

Prewash

Drying

40° AA

ZWD 1271 W

Then select a washing programme by means of the “Fabrics” button. If you wish to drain and spin press the “Skip/Reset” button in order to select the “Spin” or “Drain” position. You can select the spin speed by means of the relevant button and then press press the “Start/Pause” button.

Important!

If you accidentally press the “Skip/Reset” button more than once, the display will show three blinking dashes. To cause the washing machine to drain the water, select any washing programme by means of the “Fabric” button, then press “Skip/Reset” three times in order to select the “Drain” position (only the “Drain” light will remain lit) then press again the “Start/Pause” button.

The Rinse Hold option cannot be selected for the automatic WASHING & DRYING programme.

6 “Options” button

Press this button to select the following options:

• Prewash: select this option if you wish your laundry

to be prewashed at 30° C before the main wash (not

available for Wool/Handwash programme).

The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

• 40° AA: this option can be selected for cottons and

synthetics lightly or normally soiled with a temperature of 40°C or higher. The washing temperature will be reduced and the washing time will be prolonged in order to achieve an AA class in energy efficiency and washing performance (not available for Cottons Daily

programme).

• “Extra Quick”: select this option for laundry that is

only slightly soiled (not available for Cottons Daily and Wool/Handwash programmes). The washing time will be reduced according to the type of fabric and the selected temperature.

The “Prewash”, the “40° AA” and “Extra Quick” options cannot be selected together by means of the “Options” button.

7 “Auto Dry” button

This button allows you to choose the required degree of drying for cottons and synthetics:

- Extra dry (only for Cottons)

- Store dry (Cottons and Synthetics)

- Iron dry (only for Cottons)

The corresponding pilot light illuminates. The drying time is automatically adjusted by the machine: the laundry will be dried to the selected degree of dryness.

8 “Drying Time” button

By depressing this button you can select a timed programme for cotton or synthetics, the relevant light illuminates. To select “Cottons” you have to push the button for about 2 seconds. To select the drying time push the button until the time you want appears in the display according to the fabrics (Cottons or Synthetics) you have to dry.

For Cottons and Synthetics you can select a drying time from 10 minutes to 130 minutes (

2.10).

Every time you press the button the time increases by 5 mins.

9 Display

The following pieces of information are shown on the display:

• Three blinking dashes, when a programme is cancelled by means of the “Skip/Reset” button.

The three blinking dashes will also appear when you press the “On/Off” button to switch the machine on, if the previously selected cycle has been erased.

---

•

Duration of washing programme in hours and minutes, after you have selected a programme.

While the programme is running (after you have pressed the “Start/Pause” button), the displayed time value decreases by one unit every minute.

• Selected drying time in minutes or hours and minutes (max 130 mins). .

After the programme has started the time remaining is

updated every minute.

• The washing machine has stopped with water in

the tub, at the end of a programme with the “Rinse Hold” option: this is indicated by a blinking zero.

• The washing machine has completed the programme: this is indicated by a blinking zero.

The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the Skip/Reset button.

Important!

The first time you use the machine, when you switch

it on, it may display a blinking zero. This is due to the fact that the machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.

• Delay start, a time value indicated in hours and selected by means of the relevant button (max 23 hours).

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the “Start/Pause” button, the delay time value displayed will decrease by units of one hour every hour. When only two hours remain, the display will decrease in 30 minute steps down to zero. You can delay the start of the selected programme by up to 23 hours in one hour intervals.

• An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

• An alarm code indicates a fault in the machine operation (see the relevant chapter on page 22-23).

2.05

1.25

E20

10 “Start/Pause” button

This button has two functions:

• Start: after you have selected the desired programme and options, press this button to start the machine. The light above the button will stop flashing and remain lit.

If you have selected a delay time by means of the “Delay” button, the countdown will begin and will be shown on the display.

• Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.

Important! You must set the washing machine to PAUSE before you make any change in the programme in progress.

11 “Skip/Reset” button

This button performs two functions:

- Clears the memory

- Selects special programmes

At the end of every programme the “Reset” button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display. If the previous programme is not cleared, the display will show a flashing “

0”, when you switch the machine

on.

Selecting a special programme:

A wash programme must be selected in the normal way. (“Start/Pause” button not pressed)

A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.

To select rinse & spin, press the “Skip” button once, the wash LED goes out.

To select spin only, press the “Skip” button twice. The wash & rinse LED,s go out.

To select Drain press the “Skip” button three times, the wash - rinse - spin LED,s go out.

If you wish to cancel or advance the running programme to the required phase, PAUSE the cycle and then press the “Skip” button as previously described.

Prewash

Wash

Rinse

Spin

Drain

Drying

Prewash

Wash

Rinse

Spin

Drain

Drying

Prewash

Wash

Rinse

Spin

Drain

Drying

Start/Pause

Prewash

Wash

Rinse

Spin

Drain

Drying

12 “Delay” button

This button makes it possible to delay the starting of the programme selected from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours. The delay you have selected is shown on the display for about 3 seconds; afterwards, the duration of the programme reappears. You must select this option after you have set the programme and before you press the “Start/Pause” button.

The time value shown on the display will decrease by one unit every hour.

You can change the delay time at any moment, before you press the “Start/Pause” button.

If you have already pressed the “Start/Pause” button, and you wish to cancel the delay time, proceed as follows:

• set the machine to PAUSE by pressing the “Start/Pause” button;

• press the “Delay” button until the display shows the symbole «

0’».

• press the “Start/Pause” button again.

Important!

The door will be locked throughout the delay time. If you need to open the door, you must first set the machine to PAUSE by pressing the “Start/Pause” button. After you have closed the door, press the “Start/Pause” button again.

13 Programme phase indicator

lights

When you select a programme, the lights relevant to the phases that form the programme light up.

After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.

Prewash

Wash

Spin

Rinse

Drain

Drying

+ 21 hidden pages