Zanussi ZWD 1270 W, ZWD 1270 S, ZWD 1470 W User Manual

0 (0)

WASHER-DRYER

ZWD 1270 W

ZWD 1270 S

ZWD 1470 W

 

 

 

 

 

 

132989240

INSTRUCTION BOOKLET

GB

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Installation

This appliance is heavy. Care should be taken when moving it.

It is dangerous to alter the specifications or attempt to modify this product in any way.

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

Pets and children have been known to climb into washer-dryers. Please check your drum before use.

The glass door becomes very hot during the washing and drying cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

Keep all packaging well away from children.

Keep all detergents in a safe place out of children’s reach.

Use

Always unplug the appliance and turn off the water supply after use.

Do not overload the appliance. See relevant section in the instruction book.

Only wash and dry fabrics which are designed to be machine washed and dried. If in doubt, consult the care label on the clothes.

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing

frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

As some duvets and eiderdowns should be washed/dried in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

The users should always check that they have not left their gas lighters (disposable or otherwise) in their clothing.

Never tumble dry items that have had contact with chemicals such as dry cleaning fluid.These are of a volatile nature and could cause an explosion.

Only tumble dry items which have been washed in water or require airing.

Plastic detergent dispensers should not remain in the drum during the drying cycle, as the plastic used is not designed to withstand the heat. If you wish to wash-through-to-dry you should use the conventional detergent dispenser drawer.

Leave the porthole door slightly ajar between washes to preserve the door seal.

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

2

Contents

For the User

Important Safety Information Your New Washer-Dryer

Description of the Appliance

Detergent dispenser drawer Child safety feature

The Control Panel

Operating sequence

Washing

Load the laundry Measure out the detergent

Measure out the fabric softener Switch the machine on

Select the required programme/fabric Select the temperature

Select the spin speed or the “Rinse Hold” option Select the desired options

Select the “Delay” Start the programme

How to change a programme during its cycle How to cancel a programme during its cycle How to open the door during the cycle of

a programme

End of programme

Drying 2.75 kg of cotton Autodrying 2 kg of synthetics

Washing and Drying Hints

Which detergent to use?....

And in which form?

Wash Care Symbols

Washing Programmes

Drying Programmes

Maintenance and Cleaning

Descaling

2 After each wash

4Maintenance wash External cleaning

5Cleaning the dispenser drawer

5

Cleaning the drawer recess

5

Cleaning the pump

6-10

Cleaning the water inlet filter

The dangers of freezing

11-14

Emergency emptying out

11

Something Not Working

11

11

Service and Spare Parts

11

Guarantee Conditions

11

11

For the Installer

12

12

 

12

Installation Instructions

12

Technical Specifications

12

 

13

Unpacking

13Positioning Water inlet

13 Water drainage

13Levelling

14Special conditions

14In the interest of the environment Electrical connection

15

16

16

17

18

19

Guide to use the Instruction Book

20-21

20

20

20

20

20

20

20-21

21

21

21

22-23

23

24

25

25

26

26

27

27-28

28

28

28

29

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions

Hints and tips Environmental information

3

Your New Washer-Dryer

This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

The special wool programme with its new delicate wash system treats your woollens with extreme care.

The balance control device ensures that the machine remains stable when spinning.

Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

The ECO valve allows total use of detergent and reduces water consumption so saving energy.

The two drying programmes will give your wash that soft, relaxed feel whatever the weather.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

Adjust the quantity of detergent according to the hardness of your water supply, the amount of laundry and the degree of soiling.

Select the “Extra Quick” programme for lightly soiled laundry.

A programme without prewash is sufficient for normally soiled laundry.

Try to load the maximum drying capacity of the machine as small loads are uneconomical.

Always load well spun laundry. The higher the spin speed, the lower the electricity consumption and the shorter the drying times.

In the interest

of the environment

Materials marked with the symbol are recyclable.

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

Help to keep your country tidy - use authorised disposal sites for your old appliance.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed "Something Not Working".

4

Zanussi ZWD 1270 W, ZWD 1270 S, ZWD 1470 W User Manual

Description of the Appliance

1 Detergent dispenser drawer

2 Control Panel

3 Door opening handle

4 Drain pump

5 Adjustable feet

12

 

 

 

 

 

 

 

 

Delay

ZWD 127O W

 

 

 

 

 

 

Cottons

 

 

 

 

 

Cottons

95°C

1200

Prewash

Extra Dry

 

 

Prewash

 

 

Synthetics

60°C

900

40° AA

Store Dry

 

 

Wash

 

 

Delicates

50°C

700

Iron Dry

Cottons

 

Rinse

 

On/Off

Wool

40°C

500

Extra Quick

Synthetics

Synthetics

Skip

Spin

PROGRESS 1200

HYDROSYSTEM 5.5 kg

Hand Wash

30°C

Rinse Hold

Store Dry

 

 

Drain

 

 

 

 

 

 

 

Drying

 

 

 

 

 

 

Auto Dry Drying Time Start/Pause

Reset

 

 

 

Fabrics

Temperature

Spin Speed

Options

 

 

3

4

5

Detergent dispenser drawer

Prewash

Main wash Fabric softener

Child safety feature

This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine.

To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin.

To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.

C0063

P1131

5

The Control Panel

Delay

ZWD 127O W

 

 

 

Cottons

 

 

 

 

 

Prewash

Extra Dry

 

 

Prewash

 

 

 

Store Dry

 

 

Wash

 

 

AA

Iron Dry

 

 

 

 

Cottons

 

Rinse

On/Off

 

 

Synthetics

Skip

Spin

 

 

Synthetics

 

Extra Quick

Store Dry

Drain

 

 

 

 

 

 

 

 

 

 

Drying

 

 

 

Auto Dry Drying Time Start/Pause

Reset

 

Fabrics

Temperature Spin Speed

Options

 

 

1

2

3

4

5

6

1 On/Off button

Press this button to switch the machine on. The display

(9) will show three blinking dashes or a blinking zero. You will find more detailed explanations on page 7 and 8 (see “DISPLAY”).

Press the “On-Off” button again to switch the machine off.

2 MAINS-ON light

This light is connected to the “On/Off” button. It lights up when you press the button, and goes out when you press it again.

3 “Fabrics” button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.

Hand Wash

When you select this programme, you obtain a particularly delicate wash, suitable for articles of clothing whose label indicates that they must be handwashed .

4 “Temperature” button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the machine. The relevant light will light up.

Maximum temperatures are 95°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be hand-washed (Hand Wash programme).

7

8

9

10

11 12 13

Important!

By pressing the “Temperature” and “Spin Speed” buttons simultaneously for 3 seconds, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection.

By pressing these 2 buttons again the acoustic signal is reactivated.

5 “Spin Speed” button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the machine. The relevant light will light up.

Maximum speeds are:

• for cotton: 1,400 (ZWD 1470 W)

1,200 rpm (ZWD 1270 W - 1270 S) ;

for synthetic fabrics, wool, and fabrics to be handwashed: 900 rpm;

for delicate fabrics: 700 rpm.

“Rinse Hold” position : when you choose this option,

the machine will not drain the water of the last rinse, so as not to crease the laundry.

At the end of the cycle, the “Start/Pause” button light will flash, to indicate that the water must be drained and a static zero will appear on the display.

To complete the cycle, choose one of the following options:

Draining and spin:

-Press the “Start/Pause” button. The machine will drain the water, then spin the laundry at the maximum speed provided for the selected programme.

-Select spin speed by means of button 5, and press the “Start/Pause” button.

6

Drain only

-Press the “Skip/Reset” button once, so as to cause the “Drain” light to light up, then press the

“Start/Pause” button.

Important! If you accidentally press the “Start/Pause” button more than once, the display will show three blinking dashes. To cause the washing machine to drain the water, select any washing programme by means of the “Fabric” button, then press “Skip/Reset” three times in order to select the “Drain” position (only the “Drain” light will remain lit).

The Rinse Hold option cannot be selected for the automatic WASHING & DRYING programme.

6 OPTIONS button

Press this button to select the following options:

Prewash: select this option if you wish your laundry to be prewashed before the main wash (not available for wool and hand-wash cycle).

The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

40° AA: this option can be selected for cottons and synthetics lightly or normally soiled with a temperature of 40°C or higher.

If you select 40°C together with option 40 AA, the machine will prolong the time at 40°C in the washing phase. On cotton programme this will allow an A class in energy efficiency and washing performance to be achieved.

If you select 95°C, 60°C or 50°C and press the 40 AA button, the washing temperature will be reduced and the washing time will be prolonged.

• “Extra Quick”: select this option for laundry that is only slightly soiled (not for wool and Hand Wash programme).

The washing time will be reduced according to the type of fabric and the selected temperature.

The “Prewash”, the “40 AA” and “Extra Quick” options cannot be selected together.

7 “Auto Dry” button

This button allows you to choose the required degree of drying for cottons and synthetics:

-Extra dry (only for cottons)

-Store dry (cottons and synthetics)

-Iron dry (only for cottons)

The drying time is automatically adjusted by the machine: the laundry will be dried to the selected degree of dryness.

8 “Drying Time” button

By depressing this button you can select a timed programme for cotton or synthetics, the relevant light illuminates. To select “cottons” you have to push the button for about 2 seconds. To select the drying time push the button until the time you want appears in the display according to the fabrics (cotton or synthetics) you have to dry.

-For COTTON you can select a drying time from 10 minutes to 130 minutes (2.10).

-For SYNTHETICS you can select a drying time from 10 minutes to 100 minutes (1.40).

Every time you press the button the time increases by 5 mins.

9 Display

The following pieces of information are shown on the display:

Three blinking dashes, when a programme is cancelled by means of the “Skip/Reset” button.

The three blinking dashes will also appear when you press the “On/Off” button to switch the machine on, if the previously selected cycle has been erased.

---

7

Duration of washing programme in hours

and minutes, after you have selected a programme.

2.05

While the programme is running (after you have pressed the “Start/Pause” button), the displayed time value decreases by one unit every minute.

Selected drying time in minutes or hours and minutes.

Important!

The first time you use the machine, when you switch it on, it may display a blinking zero and give an audible warning signal. This is due to the fact that the machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.

Delay start, a time value indicated in hours and selected by means of the relevant button.

1.25

After the programme has started the time remaining is updated every minute.

The washing machine has stopped with water in the tub, at the end of a programme with the “Rinse Hold” option: this is indicated by a static zero.

The washing machine has completed the programme: this is indicated by a blinking zero. At the same time. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the Skip/Reset button.

0

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the “Start/Pause” button, the

countdown begins, and the delay time value decreases by one unit every hour.

You can delay the start of the selected programme by up to 24 hours in one hour intervals.

An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

The incorrect selection is also indicated by an audible warning signal.

An alarm code indicates a fault in the machine operation (see the relevant chapter on page 22-23).

E20

8

10 “Start/Pause” button

This button has three functions:

Start: after you have selected the desired programme and options, press this button to start the machine. The light above the button will stop flashing and remain lit.

If you have selected a delay time by means of button 12, the countdown will begin and will be shown on the display.

Pause: when you press this button again, the programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.

Important! You must set the washing machine to PAUSE before you make any change in the programme in progress.

Draining of water and spinning after the execution of programmes with the “Rinse Hold” option.

11 “Skip/Reset” button

This button performs two functions:

-Clears the memory

-Selects special programmes

At the end of every programme the “Reset” button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display.

If the previous programme is not cleared, the display will show a “0” flashing and an audible signal will sound, when you switch the machine on.

Selecting a special programme:

A wash programme must be selected in the normal way. (“Start/Pause” button not pressed)

Start/Pause

A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.

Prewash

Wash

Rinses

Spin

Drain

Drying

To select rinse & spin, press the “Skip” button once, the wash LED goes out.

Prewash

Wash

Rinses

Spin

Drain

Drying

To select spin only, press the “Skip” button twice. The wash & rinse LED,s go out.

Prewash

Wash

Rinses

Spin

Drain

Drying

To select Drain press the “Skip” button three times, the wash - rinse - spin LED,s go out.

Prewash

Wash

Rinses

Spin

Drain

Drying

If you wish to cancel or advance the running programme to the required phase, PAUSE the cycle and then press the “Skip” button as previously described.

9

Loading...
+ 21 hidden pages