Zalman ZM-WB4 Plus, ZM-WB5 User Manual

Please visit our website and watch the ZM-WB4 Plus / WB5 installation video for easy installation.
Please read this manual thoroughly before installation.The specifications of this product and its components may change without prior notice to
improve performance.
http://www.zalman.co.kr http://www.zalmanusa.com
ZM-WB4 Plus / ZM-WB5
(English Version)
CPU WATER BLOCK
The specifications of any product may change without prior notice to improve performance.
1
1) Test the product for leakage away from the system before installing it on the system. Once no leakage is confirmed, proceed with the installation and use.
2) Used approved coolant for computer water-cooling to prevent corrosion.
3) Use coolant tubes listed under the compatibility list.
4) Do not install the product if it interferes with any VGA components.
5) Design of this product does not allow product disassembly. Do not disassemble the product.
Precautions
1) Weight : 160g
2) Material : Pure Copper (Base), Pure Aluminum (Cover)
3) Dimensions : 63(W) x 63(L) x 40(H)mm
4) Compatible CPU Socket
WB4 Plus : Intel (Socket 478/775), AMD (Socket AM2/754/939/940)WB5 : Intel (Socket 775), AMD (Socket AM2/754/939/940)
5) Compatible Tubes (Outer x Inner) : 14 x 10mm, 13 x 10mm, 13 x 9mm, 12 x 9mm,
12 x 8mm, 11 x 8mm, 10 x 8mm
2. Specifications
1) Zalman’s creative dimple-type processing technology allows lightness in weight and excellent cooling performance.
2) Pure copper-base material water block provides excellent heat transfer, and anodized water block cover prevents corrosion.
3) Connection fitting for the hose is a single-body cover in the form of two connection structure types, which allows for various types of hoses to be used.
Zalman Tech Co., Ltd. is not responsible for any damages due to external causes, including but not limited to, improper use, problems with electrical power, accident, neglect, alteration, repair, improper installation, or improper testing.
1. Features
Disclaimer
The specifications of any product may change without prior notice to improve performance.
2
3. Components
1) Common Components
CPU Water Block AssemblyTwo(2) Clips Four(3) BoltsThree(3) Clip Bolts Thermal GreaseTwo(2) Tube Clamps A (13.8 X 9.5mm ) Two(2) Tube Clamps B (11.5 X 8mm ) Paper Washer User’s Manual
2) Components for Intel (Socket 775)
Clip Support for Socket 775Back plate for Socket 775Four(4) Fixing Bolts for Clip Support
3) Components for Intel (Socket 478) (Only in ZM-WB4 Plus)
Two(2) Clip Supports for Socket 478
4) Components for AMD (Socket AM2/754/939/940)
Clip for AMD
ZALMAN
❶❷❸❹❺
❻❼❽❾❿
󱆌󱆍󱆎󱆏
The specifications of any product may change without prior notice to improve performance.
3
4. Exploded View
Bolt
Water Block Assembly
Fixing Bolt for Clip Support
Clip Support for Socket 775
Clip Support for Socket 478
Backplate for Socket 775
Clip Bolt
Clip for Intel
Retention Guide
Clip for AMD
ZM-WB4 Plus/ZM-WB5
Retention Guide for AMD
IInntteell ((SSoocckkeett 777755)) IInntteell ((SSoocckkeett 447788))
((OOnnllyy iinn ZZMM--WWBB44 PPlluuss))
CClliipp CCoommbbiinnaattiioonnss ffoorr IInntteell
Overlap the left and right Clips as shown in the picture above, and assemble them with the use of Bolts.
AAMMDD ((SSoocckkeett AAMM22//775544//993399//994400))
The specifications of any product may change without prior notice to improve performance.
4
Clip Support Fixing Bolt
Clip Support for Socket 775
Motherboard
Backplate for Socket 775
Socket Lever
Lever Slot
Socket Lever
IInnssttaallllaattiioonn ffoorr DDiiffffeerreennccee TTuubbee SSiizzee
Tube Clamp A (13.8 X 9.5mm) : 14x10mm, 13x10mm
Tube Clamp B (11.5 X 8mm) : 13x9mm, 12x9mm, 12x8mm, 11x8mm, 10x8mm
Note 1) Make sure that the outlet is installed
in a manner so that the outlet is placed above the inlet as shown in the picture.
Outlet
Inlt
Motherboard
4. Exploded View
1) Intel - Socket 775
Install Clip Supports for Socket 775
Align the clip support for socket 775 and the back plate for socket 775 with the mounting holes on the motherboard and fasten them together using the fixing bolts for clip support. The lever slot on the clip support should be properly oriented on the hinged side of the socket lever when installing.
The specifications of any product may change without prior notice to improve performance.
5
Retention Guide
Clip Support for Socket 478
Clip
Clip Bolt
Clip
Clip Bolt
Install Clip
Align the Clips’ holes with the Water block tabs as shown in the diagram, and install the Clips by slowly screwing the Clip Bolts into the Clip holes. Hold the Clips with one hand, and install with small hand motions for easy installation.
Install Clip
Align the Clips’ holes with the Water block tabs as shown in the diagram, and install the Clips by slowly screwing the Clip Bolts into the Clip holes. Hold the Clips with one hand, and install with small hand motions for easy installation.
Apply Thermal Grease
Clean the contact surface of the CPU completely.
Apply Thermal Grease on the CPU surface that makes contact with the base of the Water Block.
2) Intel - Socket 478 (Only in ZM-WB4 Plus)
Install the Clip Supports for Socket
478 Install the Clip Supports for Socket 478 on both sides of the Retention Guide as shown in the diagram on the right.
The specifications of any product may change without prior notice to improve performance.
6
3) AMD Socket (AM2/754/939/940)
Install CPU Water Block
Set the CPU Water Block at the center of the CPU. Hook the support, then hook the Clip’s slot into the center lug of Clip lever’s slot into the other center lug.
Apply Thermal Grease
Clean the contact surface of the CPU completely. Apply Thermal Grease on the CPU surface that makes contact with the base of the Water Block.
Center Lug
Lever’s Slot
Thermal Grease
Lever
Install CPU Water Block
Set the CPU Water Block at the center of the CPU. Screw the Bolts in slightly, then tighten each Bolt a few turns at a time while alternating between the two until the Clips are completely pressed against the Clip Support.
Clip’s Slot
Center Lug
The specifications of any product may change without prior notice to improve performance.
7
Stable performance and noiseless liquid cooling system can both be achieved with the use of Zalman’s VGA Water Block, Heatpipe Hard Disk Cooler, Noiseless Case Fan, and Northbridge Water Block
Zalman Noise Prevention System
VGA Water Block Heatpipe HDD Cooler Noiseless Case Fan Northbridge Water Block
Gaming PC Enclosures
·Reduction in the PFC circuitry’s switching FET heat generation by use of 3
·Parallel switching FETs (normally 1 or 2 used)
·Heatpipe cooling system on the main rectifier (output) diodes for maximum stability
·and minimum fan speed for ultra quiet operation
·Modular design for convenient and tidy cable installation
·Blue LEDs for cool aethetics
·High end Gaming Enclosure built sturdy all aluminum aanels
·Three tool free hinged magnetic panel(2 Left, 1 Right) for
easy installation and access to components
·Tool free installation of disk drives, Fan Controllers, Audio
interfaces etc
·Accommodates up to 6 Hard Drives
·Luxurious and cool aesthetics
·Color option: Black (Red LED Fans), Titanium (Blue LED Panel)
For more information, please visit our website.
Heatpipe Cooled Modular Power Supply
ZM500-HP ZM600-HP
GT 1000
Loading...