User's Manual
CNPS2X
Intel Socket LGA 1155 / 1156 / 1150 / 775 CPUs
AMD Socket FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2 CPU&APUs
To ensure safe and easy installation, please read
the following precautions.
www.ZALMAN.com
Ver. 130620
1. Precautions
1) Avoid inserting objects or hands into the fan while it is in operation to prevent
product damage and injuries.
2) Do not ingest the Thermal Grease, and avoid its contact with skin and eyes.
If contact is made with skin, wash off with water. If ingested or irritation
persists, seek medical attention.
3) To prevent possible injuries, gloves must be worn while handling this product.
4) Excessive force exerted on the fan may cause damage to the fan and/or system.
5) Use and keep the product away from reach of children.
6) Check the components list and condition of the product before installation.
If any problem is found, contact the retailer to obtain a replacement.
7) Zalman Tech Co., Ltd. is not responsible for any damaged due to overclocking.
8) During transportation of the system, the cooler must be removed.
Zalman is not responsible for any damages that occur during the transport of
a system.
9) Product design and specifications may be revised to improve quality and performance.
Disclaimer) Zalman Tech Co., Ltd. is not responsible for any damages due to
external causes, including but not limited to, improper use, problems
with electrical power, accident, neglect, alteration, repair, improper
installation, or improper testing.
2. Specifications
Spec.
Dimensions 84(L) x 84(W) x 27(H) ㎜
Fan
Thermal Grease
[ZM-STG2M]
Model
Material Pure Aluminum & Copper
Weight 83g
Bearing Long Life Bearing
RPM 1,500 ~ 2,600RPM ±10%
Noise Level 17.4 ~ 22.7dBA ±10%
Voltage 12V
Contents 1g
Temperature
-40℃ ~ +150℃ (-40℉ ~ +302℉)
Range
.COM
CNPS2X
1
3. Components
1) Common Components
Backplate ManualCooler
Side Caps
Clip Bolts
Loading Block Double-sided
2) Intel Components
Socket 1155 /1156 / 1150 / 775
.COM
Nuts Installation Bolts
Tape
Thermal Grease
(ZM-STG2M)
3) AMD Components
Socket FM2/FM1/AM3+/AM3/AM2+/AM2
AMD ClipIntel Clip
2
4.Installation
A. Clip Installation
※ Install the clip according to a user socket as shown in the image.
- install the clip that fits the socket using the clip bolt
Intel Socket Clip Installation
Caution
Make sure the Clips are bent downwards when mounted on top of the CPU.
AMD Socket Clip Installation
Intel Clip AMD Clip
.COM
3
X
X
B.
Nuts and Side Caps
Intel Socket 1156 / 1155 / 1150 / 775
- Insert the Nuts to the Backplate according
to the socket type and secure them with
Side Caps.
FM2 / FM1 / AM3+ / AM3 / AM2+ / AM2
- Insert the Nuts to the Backplate according
to the socket type and secure them with
Side Caps.
2
2
1
AMD Socket
Intel Socket 1156/1155/1150
Caution Caution
[Intel Socket]
Take note of the orientation of the Nuts
and the Side Caps.
Intel Socket 775
[AMD Socket]
Take note of the orientation of the Nuts
and the Side Caps.
AMD Socket
1
.COM
4
C.
O
X
Double-sided Tape and Loading Block Installation
Socket 1156/1155/1150 Installation does not require the Loading Block.
※ Intel
Intel Socket 1156 / 1155 / 1150
Caution
Please note that the sticky side of the
Loading Block serves to attach the
Loading Block to the backplate.
Intel Socket 775
AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2
① Peel off the Loading Block cover and
attach it to the Backplate with the sticky
side facing the center of the Backplate.
② Peel off one side of the Double-sided Tape
and attach it with the sticky side facing the
Loading block. Then, peel off the top cover.
Double-sided
Tape
Loading
Block
.COM
5
D. Backplate Installation
Intel Socket 1156 / 1155 / 1150 / 775
- Align the Backplate’s nuts with
motherboard’s clip support holes, attach
it to the back side of the motherboard.
M/B
AMD Socket FM2/FM1/AM3+/AM3/AM2+/AM2
① Take away the fixed Clip support from
the motherboard.
M/B
② Align the Backplate with motherboard’s
clip support holes, attach it to the back
side of the motherboard.
M/B
.COM
6
E. Cooler Installation
X
① Apply a suitable amount of thermal grease on the center of the CPU, then mount the
heatsink and fasten the installation bolts based on the CPU socket type.
Intel or AMD CPU
Intel Socket 775
Intel Socket 1156/1155/1150
Unused mounting hole
Intel Clip AMD Clip
Caution
When installing the heatsink on a tower case, make sure the heatpipe on the
base is parallel to the ground, as installing it perpendicularly may limit the cooling
performance.
Heatpipe Heatpipe
AMD Socket
.COM
7
② Connect the cooler’s 4-pin connector to the motherboard’s CPU Fan header.
Caution
After installing, be sure to activate the
PWM control mode in BIOS on the
motherboard.
M/B
.COM
8
McGrp.Ru
Сайт техники и электроники
Наш сайт McGrp.Ru при этом не является просто хранилищем
инструкций по эксплуатации, это живое сообщество людей. Они общаются
на форуме, задают вопросы о способах и особенностях использования техники.
На все вопросы очень быстро находятся ответы от таких же посетителей сайта,
экспертов или администраторов. Вопрос можно задать как на форуме, так и
в специальной форме на странице, где описывается интересующая вас техника.
Loading...