YEALINK VCM60 Users Manual

ideo Conferencing Wireless Microphone

V

www

Quick Start Guide(V1.2)

.yealink.com

Packaging Contents

The following items are included in your package. If you find anything missing,
contact your system administrator.

VCM60 Wireless Micpod

Power Adapter

Dongle

USB Cable

Quick Start Guide

The VCM60 Component Introduction

1

2

3

Charging Interface

1

2

3

Battery Indicator

Built-in Microphone

Mute Button

4

5

Switch

4

5

Turning On or Off the VCM60

To start the VCM60, turn on the switch on the bottom of the VCM60.
You can turn off the switch if the VCM60 is not in use for a long period of time.

Connecting the VCM60 to the Video Conferencing Endpoint

To ensure good voice quality, the VCM60 can be connected to the VC110 video
conferencing endpoint to work as the audio input device.

1

To connect the VCM60 to the VC110 video conferencing endpoint, do the following:

1. Connect the dongle to one of the USB ports on the VC110 on-in-one unit.
The

2. Turn on the VCM60.
The VCM60 registers with the dongle automatically. If successful, the
(unregistered) icon on the status bar of display device will change to
(registered). And the display device prompts the battery capacity.

（unregistered)

icon appears on the status bar of the display device.

LED Instruction

There are two indicators on the top of the VCM60. The indicators display the VCM60
work status.

Battery indicator LED on the VCM60 Wirelss Micpod:

LED Status

Solid green

Flashing red

Flashing green

Off

Description

The VCM60 is turned on within the first 5 seconds.
The battery capacity reaches 100% during charging.

The battery capacity can maintain less than 1 hour.

The VCM60 is charging.

Other status.

2