Yamaha VINTAGESTOMP User Manual

VINTAGE STOMP PACKAGE

VINTAGE STOMP PACKAGE

VINTAGE STOMP PACKAGE

Owner’s Manual

Owner’s Manual

Owner’s Manual

What Are ADD-ON EFFECTS?

ADD-ON EFFECTS are software packages that install additional high-quality effects programs on digital
consoles.

What is the Vintage Stomp Package?

Vintage Stomp is one of the ADD-ON EFFECTS packages.
It simulates the characteristics of analog phasers from the 1970s.
It offers three program types that you can use to match your purposes: Max100, Vintage Phaser, and Dual Phaser.
Max100 is a model that reproduces vintage effects manufactured only during the second half of the Seventies.
Dual Phaser is a model that reproduces vintage effects manufactured only during the mid-Seventies. The Vintage Phaser does
not limit itself to reproducing any particular model. Instead, it offers an extremely high level of freedom in creating the sounds
expected from phasers.

What is VCM (Virtual Circuitry Modeling)?

VCM is a technology that enables you to model element levels in analog circuits (such as resistors and
capacitors). This technology was developed by an engineering group led by Mr. Kunimoto, an engineer
who developed the first physical modeling synthesizers, VL1 and VP1.
Vintage Stomp utilizes VCM technology.

Special Note

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.

• The software and this Owner’s Manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of
the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for
the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from the screens
which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective companies.

© 2005 Yamaha Corporation. All rights reserved.

1

Installing the Vintage Stomp Package

See the “ADD-ON EFFECTS Installation Guide” for information about the installation method for Vintage Stomp Package.

Max100

Using Max100

As with other effects, you can recall and edit the Max100 program on the console or in Studio Manager.
The basic operation is as follows:

1 Select one of the internal effects processors.

2 Patch the signal to and from the currently selected effects processor.

3 Locate the Effects Library page.

4 Select and recall Max100.

n When you recall the program, all effects processor outputs will be muted temporarily.

5 Locate the Effects Edit page.

6 Set the parameters. (See the “Part Names and Functions” on page 3 for more information on Max100 parameters.)

The procedure for recalling and editing Max100 varies depending on the console you are using.
Refer to the Owner’s Manual that came with your console for more information.

Editing Parameters in Studio Manager

In Studio Manager, editable parameters appear in both the Max100 window and the Generic Editor window.
The Max100 window enables you to edit Max100 specific parameters, and the Generic Editor window enables you to edit
parameters common to Max100 and other Effects.
Refer to the Studio Manager Owner’s Manual for your console for more information on the Generic Editor window.

Studio Manager Generic Editor window

2