Yamaha RXV-395, RXV-395-RDS, HTR-5130-RDS, HTR-5130 Service manual

AV RECEIVER

RX-V395/RDS

HTR5130/RDS

SESE

SE

SESE

SERVICE MANUALSERVICE MANUAL

SERVICE MANUAL

SERVICE MANUALSERVICE MANUAL

This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA
Products, are already known and understood by the users, and have therefore not been restated.

WARNING: Failure to follow appropriate service and safety procedures when servicing this product

IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute

The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research,
engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products.
Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to
retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.

WARNING: Static discharges can destroy expensive components. Discharge any static electricity your

IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you

may result in personal injury, destruction of expensive components, and failure of the
product to perform as specified. For these reasons, we advise all YAMAHA product owners
that any service required should be performed by an authorized YAMAHA Retailer or the
appointed service representative.

authorization, certification or recognition of any applicable technical capabilities, or
establish a principle-agent relationship of any form.

body may have accumulated by grounding yourself to the ground buss in the unit (heavy
gauge black wires connect to this buss).

apply power to the unit.

RR

VV

ICIC

R

V

RR

VV

IMPORTANT NOTICE

IC

ICIC

E E

E

E E

MAMA

MA

MAMA

NN

N

NN

UU

U

UU

AA

A

AA

LL

L

LL

■ CONTENTS

TO SERVICE PERSONNEL . . . . . . . . . . . . . . . . . . . .1

FRONT PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

REAR PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3~4

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . .5~6

INTERNAL VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

DISASSEMBLY PROCEDURES . . . . . . . . . . . . . . . . .7

SELF CHECK MODE . . . . . . . . . . . . . . . . . . . . . . .8~10

PROTECTION OPERATION CHECK FUNCTION . .11

AMP ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . .12

This Service Manual used recycled paper.

100649

TUNER ADJUSTMENTS . . . . . . . . . . . . . . . . . . .13~16

DISPLAY DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

IC DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18~21

RX-V395/RDS PRINTED CIRCUIT BOARD . . . .22~29

BLOCK DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . 30~31

PIN CONNECTION DIAGRAM . . . . . . . . . . . . . . . . . 31

RX-V395/RDS SCHEMATIC DIAGRAM . . . . . . .32~36

PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37~50

REMOTE CONTROL TRANSMITTER . . . . . . . . . 51~52

YAMAHA CORPORATION
P.O.Box1,Hamamatsu,Japan

HTR5130/RDS

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

■ TO SERVICE PERSONNEL

1. Critical Components Information.
Components having special characteristics are marked

and must be replaced with parts having specifications equal
to those originally installed.

WALL
OUTLET

EQUIPMENT
UNDER TEST

AC LEAKAGE
TESTER OR
EQUIVALENT

2. Leakage Current Measurement (For 120V Models Only).
When service has been completed, it is imperative to verify
that all exposed conductive surfaces are properly insulated
from supply circuits.

● Meter impedance should be equivalent to 1500 ohm shunted

by 0.15µF.

● Leakage current must not exceed 0.5mA.

● Be sure to test for leakage with the AC plug in both

INSULATING
TABLE

polarities.

“CAUTION”

“F701 : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE 8.0A, 125V FUSE.”

A V

CAUTION

F701 : REPLACE WITH SAME TYPE 8.0A, 125V FUSE.

ATTENTION

F701 : UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE DE 8.0A, 125V.

WARNING: CHEMICAL CONTENT NOTICE!

The solder used in the production of this product contains LEAD. In addition, other electrical/electronic and/or
plastic (where applicable) components may also contain traces of chemicals found by the California Health and
Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.

DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR
ANY REASON WHATSOEVER!

Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes
or expose eyes to solder/flux vapor!

If you come in contact with solder or components located inside the enclosure of this product, wash your hands
before handling food.

RX-V395/RDS

HTR5130/RDS

Manufactured under license from Dolby Laboratories Licens­ing Corporation. "Dolby", "Pro Logic", and the double-D
symbol are trademarks of Dolby Laboratories Licensing
Corporation.

1

WARNING

Do not change the IMPEDANCE SELECTOR switch
setting while the power to this unit is on, otherwise
this unit may be damaged.

IMPEDANCE SELECTOR

SPEAKERS

–

–

MAIN

CENTER

CAUTION:

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

(SURROUND)

REAR

+

A

A

B

B

+

–

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.
"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

WARNING

:TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE

IMPEDANCE SELECTOR
SET BEFORE POWER ON

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT
TO THE CONDITION THAT THIS DEVICE
DOES NOT CAUSE HARMFUL INTERFERENCE.

AC OUTLETS

120V 60Hz

100W MAX. TOTAL

SWITCHED

■ FRONT PANELS

PHONES SPEAKERS

A

B

ON OFF

0

BASS

1

1

2

2

3

3

4

4

5—5

+

0

TREBLE

1

1

22

3

3

44

55

+

0

BALANCE

1

1

22

33

44

L5R

A/B/C/D/E 1 2 3 4 5 6 7 8

PRO LOGIC

TUNING

DOWN UP

MEMORY

REAR/SWFR

DELAY/CENTER/

TV SPORTS

ENHANCED

DISCO

CONCERT

VIDEO

CONCERT

ROCK

HALL

CONCERT

MONO MOVIE

CENTER MODE

EFFECT

STANDBY/ON

TV/DBS

2CH/6CH

DVD/LD

2CH/6CH

VOLUME

16

20 12

28 8

40 4

60 2

0

—dB

VCR

TUNER PHONO CD

TAPE/MD
MONITOR

EDIT

TUNING

MAN’L/AUTO FM AUTO/MAN’L MONO

FM/AM

CINEMA DSP

DOLBY SURROUND

TIME/LEVEL

—+

NATURAL SOUND AV RECEIVER RX-V395RDS

—

5

MODE

EON

PTY SEEK

START

FREQ

MODE

RDS MODE/

RDS

·

·

PRO LOGIC

▼ RX-V395

RX-V395/RDS HTR5130/RDS

NATURAL SOUND AV RECEIVER RX-V395

STANDBY/ON

A/B/C/D/E12345678

PHONES SPEAKERS

A

ON OFF

▼ RX-V395RDS

MEMORY

EDIT

DOLBY SURROUND

•

PRO LOGIC

TUNING

FM/AM

MODE

VCR

TUNER PHONO CD

DELAY/CENTER/

TUNING

DOWN UP

PRO LOGIC

ENHANCED

TV SPORTS

DISCO

TV/DBS

DVD/LD

2CH/6CH

2CH/6CH

TAPE/MD
MONITOR

TIME/LEVEL

–+

REAR/SWFR

CONCERT

MONO MOVIE

CONCERT

HALL

CENTER MODE

VIDEO

ROCK

CONCERT

EFFECT

VOLUME

16

20 12

28 8

40 4

60 2

0

–dB

CINEMA DSP

BASS

0

B

1

2

3

4

5–5

1

2

3

4

+

TREBLE

0

1

1

22

3

3

44

+

–

55

BALANCE

0

1

1

22

33

44

L5R

5

MAN'L/AUTO FM AUTO/MAN'L MONO

▼ RX-V395 (U, C, R, A, T, L models)

TAPE

CD

AMP

/MD

TUNER

DVD

VCR

/LD

TV

DVD

CBL

MENU

/DBS

POWER

TUNERCD TAPE/MD

213

TV/DBSDVD/LD

VCR

2CH

546

6CH

PHONO

879

+10 +100

ENTER CLEAR

0

A/B/C/D/E

TEST

EFFECT

DISC SKIP
PRESET

CH

CH

TV

E

S

D

E

O

T

C

MUTE

V

E

O

M

L

U

RETURN INDEX

TV

SLEEP

VCR REC TV INPUT

+

PRG

S/D

D

–+

T

DIR A

SELECT

TITLE MENU

A

ER

PRG

–

TIME/LEVEL

DISP

A/B

Y

DIR B

▼ RX-V395/RDS (B, G models)

TIME/

DELAY/CENTER

+–

/REAR/SWFR

PROLOGIC ENHANCED

VCR TV/DBS DVD/LD

REC/PAUSE

A/B/C/D/E

DISC

POWER VOLUME

TEST EFFECT

PLAY

A/B

PLAY

TUNER

PHONO

ON/OFF

2CH
/6CH

TAPE

CD

LEVEL

PROGRAM

DIR A DIR B

– PRESET +

SLEEP

HTR5130/RDS

RX-V395/RDS

2

RX-V395/RDS HTR5130/RDS

■ REAR PANELS

▼ RX-V395/HTR5130 U model

▼ RX-V395/HTR5130 C model

▼

RX-V395/HTR5130 R, T models

6CH DISCRETE INPUT

MAIN CENTER

SURROUND

MODEL NO. RX-V395
120VOLTS

75ΩUNBAL.

FM
ANT

GND

AM
ANT

75ΩUNBAL.

FM
ANT

GND

AM
ANT

75ΩUNBAL.

FM
ANT

GND

AM
ANT

50kHz
/9kHz
100kHz
/10kHz

FM / AM

FREQUENCY

STEP

SUB

WOOFER

GND

GND

GND

6CH DISCRETE INPUT

MAIN CENTER

6CH DISCRETE INPUT

MAIN CENTER

(PLAY) (REC)

SUB

WOOFER

(PLAY) (REC)

SUB

WOOFER

(PLAY) (REC)

MONITOR

OUT

SURROUND

MONITOR

SURROUND

MONITOR

AUDIO SIGNAL

OUT

AUDIO SIGNAL

OUT

AUDIO SIGNAL

240WATTS

60Hz

YAMAHA CORPORATION

MADE IN MALAYSIA

V261100 U-0

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

MODEL NO. RX-V395
120VOLTS

260WATTS

340VA

YAMAHA CORPORATION

MADE IN MALAYSIA

V261110 C-0

*

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

MODEL NO. RX-V395

MODEL NO. RX-V395
110/120/220/240VOLTS
260WATTS 50/60Hz

YAMAHA CORPORATION

V261120 R-0

*

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

60Hz

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

OUTPUT

WOOFER

OUTPUT

WOOFER

OUTPUT

WOOFER

+

SUB

+

SUB

+

SUB

SPEAKERS

––

–

MAIN

(SURROUND)

CENTER

CAUTION:

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

SPEAKERS

––

–

MAIN

CENTER

CAUTION:

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

ATTENTION:

POUR UN REGLAGE CORRECT, SE REPORTER
AU MANUEL D'INSTRUCTIONS.

SPEAKERS

––

–

MAIN

CENTER

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

CAUTION:

REAR

(SURROUND)

(SURROUND)

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.

+

"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

A

A

WARNING

:TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE

IMPEDANCE SELECTOR
SET BEFORE POWER ON

B

B

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

+

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

–

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.

+

"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

A

A

WARNING

FIRE OR ELECTRIC SHOCK. DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE

ATTENTION

ELECTRIQUE NE PAS OUVRIR.

IMPEDANCE SELECTOR
SET BEFORE POWER ON

B

B

SELECTEUR D'IMPEDANCE

+

–

+

A

A

B

B

+

–

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.
"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

IMPEDANCE SELECTOR
SET BEFORE POWER ON

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

REAR

REAR

:TO REDUCE THE RISK OF

:RISQUE DE CHOC

THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT
TO THE CONDITION THAT THIS DEVICE
DOES NOT CAUSE HARMFUL INTERFERENCE.

AC OUTLETS

120V 60Hz

100W MAX. TOTAL

SWITCHED

AC OUTLETS

0.8A MAX.TOTAL
120V 60Hz

100W MAX. TOTAL

SWITCHED

VOLTAGE SELECTOR

AC OUTLETS

100W MAX. TOTAL

SWITCHED

▼ RX-V395/HTR5130 A model

▼ RX-V395/HTR5130 B model

RX-V395/RDS

HTR5130/RDS

3

6CH DISCRETE INPUT

MAIN CENTER

SURROUND

MODEL NO. RX-V395
240VOLTS

75ΩUNBAL.

FM
ANT

GND

AM
ANT

75ΩUNBAL.

FM
ANT

GND

AM
ANT

SUB

WOOFER

GND

GND

6CH DISCRETE INPUT

MAIN CENTER

(PLAY) (REC)

SUB

WOOFER

(PLAY) (REC)

MONITOR

OUT

SURROUND

MONITOR

OUT

AUDIO SIGNAL

AUDIO SIGNAL

260WATTS

50Hz

YAMAHA CORPORATION

MADE IN MALAYSIA

V261130 A-0

*

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

MODEL NO. RX-V395

MODEL NO. RX-V395
230VOLTS

260WATTS

50Hz

YAMAHA CORPORATION

MADE IN MALAYSIA

V323350 B-0

*

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

OUTPUT

WOOFER

OUTPUT

WOOFER

+

SUB

+

SUB

SPEAKERS

––

–

MAIN

CENTER

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

CAUTION:

SPEAKERS

––

–

MAIN

(SURROUND)

CENTER

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

CAUTION:

(SURROUND)

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.

+

"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

A

A

IMPEDANCE SELECTOR
SET BEFORE POWER ON

B

B

+

–

+

A

A

B

B

+

–

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.
"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

IMPEDANCE SELECTOR

IMPEDANCE SELECTOR
SET BEFORE POWER ON

SET BEFORE POWER ON

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

REAR

REAR

AC OUTLET

AC OUTLET

100W MAX.
SWITCHED

AC OUTLET

100W MAX.
SWITCHED

N89

MAINS

MAINS

RX-V395/RDS HTR5130/RDS

▼ RX-V395/HTR5130 G model

▼

RX-V395RDS/HTR5130RDS B model

▼

RX-V395RDS/HTR5130RDS G model

6CH DISCRETE INPUT

MAIN CENTER

SURROUND

MODEL NO. RX-V395
230VOLTS

75ΩUNBAL.

FM
ANT

GND

AM
ANT

75ΩUNBAL.

FM
ANT

GND

AM
ANT

MAIN
LEVEL

–10dB 0dB

75ΩUNBAL.

FM
ANT

GND

AM
ANT

MAIN

LEVEL

–10dB 0dB

GND

GND

GND

6CH DISCRETE INPUT

MAIN CENTER

6CH DISCRETE INPUT

MAIN CENTER

SUB

WOOFER

(PLAY) (REC)

SUB

WOOFER

(PLAY) (REC)

SUB

WOOFER

(PLAY) (REC)

MONITOR

SURROUND

MONITOR

SURROUND

MONITOR

OUT

AUDIO SIGNAL

OUT

AUDIO SIGNAL

OUT

AUDIO SIGNAL

260WATTS

50Hz

YAMAHA CORPORATION

MADE IN MALAYSIA

V323360 G-0

*

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

MODEL NO. RX-V395

MODEL NO. RX-V395RDS
230VOLTS

260WATTS

50Hz

YAMAHA CORPORATION

MADE IN MALAYSIA

V261210 B-0

*

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

MODEL NO. RX-V395RDS
230VOLTS

260WATTS

50Hz

YAMAHA CORPORATION

MADE IN FRANCE

V272130 G-0

VIDEO SIGNAL

VCRTV/DBSDVD/LD

IN OUT

VCRTV/DBSDVD/LDTAPE/MDCDPHONO

IN OUTIN OUT

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

OUTPUT

WOOFER

OUTPUT

WOOFER

OUTPUT

WOOFER

+

SUB

+

SUB

+

SUB

SPEAKERS

––

–

MAIN

(SURROUND)

CENTER

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

CAUTION:

SPEAKERS

––

–

MAIN

(SURROUND)

CENTER

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

CAUTION:

SPEAKERS

––

–

MAIN

CENTER

SEE INSTRUCTION MANUAL FOR CORRECT SETTING

CAUTION:

REAR

REAR

(SURROUND)

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.

+

"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

A

A

IMPEDANCE SELECTOR

SET BEFORE POWER ON

B

B

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

+

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

–

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.

+

"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

A

A

IMPEDANCE SELECTOR

IMPEDANCE SELECTOR

SET BEFORE POWER ON

SET BEFORE POWER ON

B

B

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

+

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

–

MANUFACTURED UNDER LICENSE FROM DOLBY
LABORATORIES LICENSING CORPORATION.

+

"DOLBY", "PRO LOGIC" AND THE DOUBLE-D
SYMBOL ARE TRADEMARKS OF
DOLBY LABORATORIES LICENSING CORPORATION.

A

A

IMPEDANCE SELECTOR
SET BEFORE POWER ON

B

B

+

–

MAIN A OR B: 4ΩMIN. /SPEAKER

A+B: 8ΩMIN. /SPEAKER

: 6ΩMIN. /SPEAKER

CENTER

: 6ΩMIN. /SPEAKER

REAR
MAIN A OR B: 8ΩMIN. /SPEAKER

A+B:16ΩMIN. /SPEAKER

CENTER

: 8ΩMIN. /SPEAKER
: 8ΩMIN. /SPEAKER

REAR

REAR

AC OUTLETS

100W MAX. TOTAL

SWITCHED

AC OUTLET

100W MAX.
SWITCHED

AC OUTLETS

100W MAX. TOTAL

SWITCHED

MAINS

MAINS

MAINS

HTR5130/RDS

4

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

■ SPECIFICATIONS

■ AUDIO SECTION

Minimum RMS Output Power per Channel (Power Amp. Section)
(When both channels are driven)

MAIN L, R

8 ohms, 20 Hz to 20 kHz, 0.04% THD . . . . . 60 W + 60 W

CENTER

8 ohms, 20 Hz to 20 kHz, 0.04% THD . . . . . . . . . . . 60 W

REAR L, R

8 ohms, 20 Hz to 20 kHz, 0.04% THD . . . . . 60 W + 60 W

Input Sensitivity/Impedance

PHONO (MM) . . . . . . . . . . . . . . . . . . . . . . 2.5 mV/47 k-ohms

CD/TAPE·MD/DVD·LD/TV·DBS/VCR . . . 150 mV/47 k-ohms
6CH DISCRETE INPUT (EXTERNAL DECODER)

MAIN L/R . . . . . . . . . . . . . . . . . . . . . . . 150 mV/47 k-ohms

CENTER . . . . . . . . . . . . . . . . . . . . . . . . 150 mV/40 k-ohms

REAR L/R . . . . . . . . . . . . . . . . . . . . . . . 150 mV/40 k-ohms

SUBWOOFER . . . . . . . . . . . . . . . . . . . 150 mV/40 k-ohms

Minimum RMS Output Power per Channel (Power Amp. Section)
(When both channels are driven)

MAIN L, R

8 ohms, 1 kHz, 0.07% THD . . . . . . . . . . . . . .70 W + 70 W

CENTER

8 ohms, 1 kHz, 0.07% THD . . . . . . . . . . . . . . . . . . . . 70 W

REAR L, R

8 ohms, 1 kHz, 0.07% THD . . . . . . . . . . . . . . 70 W +70 W

Maximum Power (EIAJ) [China and General models only]
(When both channels are driven)

MAIN L, R

8 ohms, 1 kHz, 10% THD . . . . . . . . . . . . . . .95 W + 95 W

CENTER

8 ohms, 1 kHz, 10% THD . . . . . . . . . . . . . . . . . . . . . 95 W

REAR L, R

8 ohms, 1 kHz, 10% THD . . . . . . . . . . . . . . .95 W + 95 W

Dynamic Power per Channel
(by IHF Dynamic Headroom measuring method)

8 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 W + 80 W

6 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 W + 100 W

4 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . .120 W + 120 W

2 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . .145 W + 145 W

DIN Standard Output Power per Channel [Europe model only]

MAIN L, R

4 ohms, 1 kHz, 0.7% THD . . . . . . . . . . . . .100 W + 100 W

CENTER

4 ohms, 1 kHz, 0.7% THD . . . . . . . . . . . . . . . . . . . . 100 W

REAR L, R

4 ohms, 1 kHz, 0.7% THD . . . . . . . . . . . . . 100 W +100 W

Maximum Input Signal

PHONO (MM)

1 kHz, 0.1% THD . . . . . . . . . . . . . . . . . . . 100 mV or more

CD/TAPE·MD/DVD·LD/TV·DBS/VCR(EFFECT ON)

1 kHz, 0.5% THD . . . . . . . . . . . . . . . . . . . . . 2.2 V or more

Output Level/Impedance

REC OUT . . . . . . . . . . . . . . . . . . . . . . . . 150 mV/2.7 k-ohms

SUBWOOFER (EFFECT OFF) . . . . . . . . . . . 5 V/1.2 k-ohms

Headphone Jack Rated Output Level/Impedance

(1 kHz, 8 ohms, 150 mV) . . . . . . . . . . . . . .0.43 V/330 ohms

Frequency Response (20 Hz to 20 kHz)

CD/TAPE·MD/DVD·LD/TV·DBS/VCR . . . . . . . . . . 0 ± 0.5 dB

RIAA Equalization Deviation

PHONO (MM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 ± 0.5 dB

Total Harmonic Distortion (20 Hz to 20 kHz)

PHONO (MM) to REC OUT

1V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.02% or less

CD/TAPE·MD/DVD·LD/TV·DBS/VCR (EFFECT OFF) to SP OUT

30 W/8 ohms . . . . . . . . . . . . . . . . . . . . . . . 0.025% or less

Signal-to-Noise Ratio (IHF-A Network)

PHONO (MM) to REC OUT (5 mV Input Shorted)

[U.S.A., Canada, China, and General models]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 dB or more

[Australia, U.K, and Europe models] . . . . . 81 dB or more

CD/TAPE·MD/DVD·LD/TV·DBS/VCR to MAIN SP OUT

(150 mV Input Shorted, EFFECT OFF) . . . .96 dB or more

Dynamic Headroom [U.S.A and Canada models only]

IEC Power [Europe model only]

Power Band Width

Damping Factor (SPEAKERS A)

RX-V395/RDS

HTR5130/RDS

5

8 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.55 dB

MAIN L, R

8 ohms, 1 kHz, 0.04% THD . . . . . . . . . . . . .65 W + 65 W

8 ohms, 30 W, 0.1% THD . . . . . . . . . . . . 10 Hz to 50 kHz

MAIN L, R

8 ohms, 20 Hz to 20 kHz . . . . . . . . . . . . . . . . .60 or more

Residual Noise (IHF-A Network)

MAIN L/R to SP OUT . . . . . . . . . . . . . . . . . . .150 µV or less

Channel Separation (Vol. –30 dB, EFFECT OFF)

PHONO

(Input Shorted, 1 kHz/10 kHz)

. . . . . . . . . . . . . . . . . . . . . . 60 dB or more/55 dB or more

CD/TAPE·MD/DVD·LD/TV·DBS/VCR

(Input 5.1 k-ohms shorted, 1kHz/10 kHz)

. . . . . . . . . . . . . . . . . . . . . . 60 dB or more/45 dB or more

Tone Control Characteristics

BASS : Boost/cut . . . . . . . . . . . . . . . . . . . ± 10 dB, 50 Hz

Turnover Frequency . . . . . . . . . . . . . . . . .350 Hz

TREBLE : Boost/cut . . . . . . . . . . . . . . . . . . ± 10 dB, 20 kHz

Turnover Frequency . . . . . . . . . . . . . . . . 3.5 kHz

Filter Characteristics

Subwoofer (L.P.F.) . . . . . . . . . . . . . . fc = 150 kHz, 6 dB/oct.

■ VIDEO SECTION

Video Signal Level . . . . . . . . . . . . . . . . . . . . . . 1 Vp-p/75 ohms

Maximum Input Level . . . . . . . . . . . . . . . . . . .1.5 Vp-p or more

Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . .50 dB or more

Monitor Output Frequency Response

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Hz to 10 MHz, –3dB

■ FM SECTION

Tuning Range

[U.S.A. and Canada models] . . . . . . . . . . . . 87.5 to 107.9 MHz

[China and General models]

(frequency step 100 kHz) . . . . . . . . . . . . 87.5 to 108.0 MHz

(frequency step 50 kHz) . . . . . . . . . . . 87.50 to 108.00 MHz

[Australia, U.K., and Europe models] . . . . 87.50 to 108.00 MHz

50 dB Quieting Sensitivity (S/N 50 dB, 1 kHz, 100% Mod.)
[U.S.A., Canada, China and General models only]

IHF, Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 µV

IHF, Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 µV

Usable Sensitivity (75 ohms)
[Australia, U.K. and Europe models only]

DIN, Mono (S/N 26 dB) . . . . . . . . . . . . . . . . . . . . . . . . 0.9 µV

DIN, Stereo (S/N 46 dB) . . . . . . . . . . . . . . . . . . . . . . . .28 µV

Alternate Channel Selectivity (± 400 kHz)

[U.S.A., Canada, China and General models only] . . . . . .75 dB

Selectivity (two signals, 40 kHz Dev. ± 300 kHz)

[Australia, U.K. and Europe models only] . . . . . . . . . . . . .55 dB

Signal-to-Noise Ratio (DIN-Weighted, 40 kHz Dev.)
[Australia, U.K. and Europe models only]

Mono/Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 dB/69 dB

Signal-to Noise Ratio (IHF)
(U.S.A., Canada, General, China models only)

Mono/stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 dB/75 dB

Harmonic Distortion

Mono/Stereo (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . 0.1%/0.2%

Stereo Separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . 48 dB

Frequency Response

(20 Hz to 15 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . 0 ± 1 dB

RX-V395/RDS HTR5130/RDS

Output Level

(30% mod. 1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . 150 mV

Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 dB

Antenna Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna

■ GENERAL

Power Supply

[U.K. and Europe models] . . . . . . . . . . . . . . . .AC 230 V, 50 Hz

[U.S.A. and Canada models] . . . . . . . . . . . . . .AC 120 V, 60 Hz

[Australia model] . . . . . . . . . . . . . . . . . . . . . . . .AC 240 V, 50 Hz

[China model] . . . . . . . . . . . . . . . . . . . . . . . . . .AC 220 V, 50 Hz

[Genaral model] . . . . . . . . . . .AC 110/120/220/240 V, 50/60 Hz

Power Consumption
[U.K., Europe, China, Australia and Genaral models] . . . 260 W

[U.S.A. model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 W

[Canada model] . . . . . . . . . . . . . . . . . . . . . . . . . .260 W/340 VA

Maximum Power Consumption (10% THD, When 5 channels are

driven)

[General model only] . . . . . . . . . . . . . . . . . . . . . . . . . . . . 630 W

AC Outlets
2 SWITCHED OUTLETS

[Europe, Canada, U.S.A., China and General models]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 W max. total

1 SWITCHED OUTLET

[U.K. and Australia models]

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100 W max. total

Dimensions (W x H x D) . . . . . . . . . . . . . .435 x 151 x 391 mm

(17-1/8" x 5-15/16" x 15-3/8")

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .10.5 kg (23 lbs. 2 oz.)

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . .AM loop antenna

Indoor FM antenna

75-ohm/300-ohm antenna adapter [U.K. model only]

Antenna adapter [U.S.A. and Canada models only]

Remote Control Transmitter

Battery

* Specifications subject to change without notice.

● DIMENSIONS

22 (7/8'')

Output Level
[Australia, U.K. and Europe models]

(40 kHz Dev. 1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . 550 mV

[U.S.A., Canada, China and General models]

(100% mod. 1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . 550 mV

Antenna Input . . . . . . . . . . . . . . . . . . . . . . .75 ohms unbalanced

■ AM SECTION

Tuning Range

[U.S.A. and Canada models] . . . . . . . . . . . . . . 530 to 1710 kHz

[China and General models]

(frequency step 10 kHz) . . . . . . . . . . . . . . . 530 to 1710 kHz

(frequency step 9 kHz) . . . . . . . . . . . . . . . . 531 to 1611 kHz

[Australia, U.K. and Europe models] . . . . . . . . 531 to 1611 kHz

Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 µV/m

435 (17-1/8'')

349.5(13-3/4'')

394 (15-9/16'')

19.8 (13/16'')

130 (5-1/8'')

151(5-15-16'')

21(13/16'')

Units : mm (inch)

HTR5130/RDS

6

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

■ INTERNAL VIEW

q

w

e

t y

r

u

i

q P. C. B. MAIN (6)
w P. C. B. INPUT (3)
e P. C. B. MAIN (5)
r P. C. B. MAIN (4)
t P. C. B. MAIN (3)
y P. C. B. INPUT (2)
u P. C. B. INPUT (5)
i P. C. B. TUNER
o P. C. B. MAIN (2)
!0 P. C. B. INPUT (6)
!1 P. C. B. OPERATION (2)
!2 P. C. B. MAIN (1)
!3 P. C. B. OPERATION (1)
!4 P. C. B. INPUT (1)
!5 P. C. B. INPUT (4)

o

!0 !1 !2 !3 !4

!5

■ DISASSEMBLY PROCEDURES (Remove parts in disassembly order as numbered.)

1. Removal of Top Cover

a. Remove 4 screws ( q ) and 4 screws ( w ) in Fig. 1.

2. Removal of Front Panel

a. Remove the knobs.
b. Remove 6 screws ( e ) in Fig. 1.

3

Top Cover

1

3

2

2

2

1

RX-V395/RDS

HTR5130/RDS

7

3

Front panel

3

Fig. 1

RX-V395/RDS HTR5130/RDS

■ SELF CHECK MODE

This machine has a SELF CHECK MODE (SELF) for facilitating inspection and measurement.

HOW TO START & CANCEL

Turn the POWER switch ON while pressing the
DVD/LD and PRESET STATION No. 8 keys simul­taneously, and then the unit enters the SELF
CHECK MODE (SELF). FL displays “SELF 1” first.
(The INPUT is CD.)
If the sound field program key of the main unit is
pressed, the mode is set to the CHECK mode of
that number. It is possible to select the INPUT
even during the self check (except for SELF 8).
To cancel the SELF CHECK MODE, turn the
POWER switch OFF or press the PRESET STA­TION No. 8 key. (The unit enters the normal
mode.)

HOW TO USE SELF CHECK MODE

In order to confirm characteristics (specifications) listed
in the table below, use SELF NO. 1, 3 and 4. (For
specifications, refer to page 5.)

No.

• Output Level/Impedance

1

• Frequency Response

• Total Harmonic Distortion (Rec Out & MAIN)

• S/N

• Minimum RMS Output Power Per Channel (Center &

3

Rear)

• Total Harmonic Distortion (Rear)

• Minimum RMS Output Power Per Channel (MAIN)

4

• Input Sensitivity/Impedance

• Headphone Jack Rated Output/Impedance

• Channel Separation

• Tone Control Characteristics

Items

CONTENTS OF SELF CHECK MODE

No.

RAM THROUGH A

1

RAM THROUGH B

2

RAM THROUGH C

3

EFFECT OFF/DISCO/FL ALL ON

4

MANUAL TEST

5

DOLBY PRO LOGIC

6

MAKER PRESET

7

EXIT

8

Menu

Select Key

PRESET STATION No. 1
PRESET STATION No. 2
PRESET STATION No. 3
PRESET STATION No. 4
PRESET STATION No. 5
PRESET STATION No. 6
PRESET STATION No. 7
PRESET STATION No. 8

DETAILS OF SELF CONTENT

SELF 1 RAM THROUGH A

● MAIN L/R is output through the bypass.

● CENTER is output with the steering OFF and by

(L+R)/2.

● RL/RR passes through the PS-RAM and is output

through the DSP.

●

The electronic volume (for CENTER/REAR) is -10dB.

● FL displays “SELF 1”

L

R

(WIDE mode)

YSS203

DOLBY PRO LOGIC section

Steering
OFF

C

L
C (L+R)/2
R

DSP section

PS-RAM

RL

RR

RL
RR

HTR5130/RDS

8

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

SELF 2 RAM THROUGH B

● L/R and RL/RR pass through the PS-RAM and are

output through the DSP.

●

CENTER is output with the steering OFF and by

(L+R)/2. (WIDE mode)

●

The electronic volume (for CENTER/REAR) is -10dB.

● FL displays “SELF 2”

YSS203

L

R

DOLBY PRO LOGIC section

Steering
OFF

DSP section

PS-RAM

C

FL
FR

RL
RR

L
C (L+R)/2
R

RL
RR

SELF 4

● Every time the PRESET STATION No. 4 key is

EFFECT OFF/DISCO/FL ALL ON

pressed, the menu changes.
1: EFFECT OFF
2: DISCO (electronic volume is 0dB.)
3: FL displays all ON

SELF 5 MANUAL TEST

● Every time PRESET STATION No. 5 key is pressed,

the TEST TONE shifts in the order of →L→C→R→S

and is output.

(The CENTER mode is WIDE)

● The electronic volume (for CENTER/REAR) is

0dB.

SELF 6 DOLBY PRO LOGIC

● L/R is output with the steering OFF.

● CENTER is output with the steering OFF and by

● RL/RR passes through the PS-RAM and is output

● The electronic volume is +10dB for CENTER and

● FL displays “SELF 3”

RX-V395/RDS

HTR5130/RDS

SELF 3 RAM THROUGH C

(L+R)/2. (WIDE mode)

through the DSP.

+7dB for REAR.

YSS203

L

R

DOLBY PRO LOGIC section

Steering
OFF

DSP section

PS-RAM

C

RL
RR

L
C (L+R)/2
R

RL
RR

● The auto input balance which is ON in the normal

mode is turned OFF.

● CENTER MODE is changed by pressing the PRE-

SET STATION No. 6 key or the CENTER MODE

key.

● The electronic volume (for CENTER/REAR) is

0dB.

● FL displays “SELF 6” and the center mode.

9

RX-V395/RDS HTR5130/RDS

SELF 7 MAKER PRESET

● Every time the PRESET STATION No. 7 key is

pressed, the mode changes between the KEEP
DATA and PRESET modes. Turning OFF the power
in the “PRESET” mode will restore the FACTORY
PRESET mode.

CAUTION : Before setting to the FACTORY PRESET,

Preset group

Preset group

write down the existing preset memory con­tents of the Tuner in a table as shown be­low. (This is because setting to the FAC­TORY PRESET will cause the memory con­tents to be as factory set, i.e., all the preset
memory by the user will be erased.)

P1

A
B
C
D
E

P5
A
B
C
D
E

P2 P4P3

P6 P8P7

● Factory Preset

1) SURROUND section

DELAY TIME : PRO LOGIC 20ms

ENHANCED 20ms
CONCERT VIDEO 28ms
MONO MOVIE 20ms
STADIUM 45ms
DISCO 14ms
ROCK CONCERT 17ms

CENTER MODE : NORMAL
VOLUME LEVEL : CENTER 0dB

2) SELECTOR section

INPUT : CD
VIDEO (BGV) : DVD/LD

3) TUNER section
Preset group

A / C / E

B / D

Preset group

A / C / E

B / D

For all the above, AUTO TUNING and AUTO STEREO are
selected as the TUNING mode.

P1

87.5MHz

630kHz

P5

107.9MHz
(U, C, R, T)

108.0MHz
(R, T, A, G)

1710kHz

(U, C, R, T)

1611kHz

(R, T, A, G)

CONCERT HALL 30ms

REAR 0dB

P2

90.1MHz

1080kHz

P6

88.1MHz

900kHz

P3

95.1MHz

1440kHz

P7

106.1MHz

1350kHz

98.1MHz
530kHz

(U, C, R, T)

531kHz

(R, T, A, G)

107.9MHz
(U, C, R, T)

108.0MHz
(R, T, A, G)

1400kHz

(U, C, R, T)

1404kHz

(R, T, A, G)

P4

P8

SELF 8 EXIT

● “MODEL” is displayed first.

When the PRESET STATION No. 8 key is pressed
again, the unit will exit the SELF CHECK mode.

10

HTR5130/RDS

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

■ PROTECTION OPERATION CHECK FUNCTION

1. Turn the POWER switch ON while pressing the TUNER and PRESET
STATION No.8 keys simultaneously.The protection operation mode and
microprocessor AD input value are displayed for 3 seconds.

Example : PRT-DC [AD value]

PRT-I

[PRT-DC] indicates detection of an abnormal DC value from the amplifier.

[PRT-I] indicates detection of an abnormal overcurrent from the amplifier.

[PRT-NON] indicates no detection.

When the PRESET STATION No. 8 key is pressed during the above dis­play, the input data are retained till they are cleared.
(“PRT-NON” appears on display when the data are cleared.)

2. Turn the POWER switch ON while pressing the TUNER and the PRESET
STATION No. 7 keys simultaneously, and the input value for detection of an
abnormal amplifier DC will be displayed.

Example : P - [01] D - [AD value]

[P- XX] is meaningless and therfore should be ignored.

[DC- ] indicates detection of an abnormal amplifier DC.

Type of protection

Detection of an abnormal
amplifier DC

Normal

(AD value)
128 - 255

Abnormal

(AD value)

0 - 127

Press any key, and the display will be canceled.

RX-V395/RDS

HTR5130/RDS

11

RX-V395/RDS HTR5130/RDS

■ AMP ADJUSTMENTS

● Confirmation of Idling Current

Right after Power is switched ON, confirm that the voltage across each resistor,
R-124, -127, -130, -136, and -143,is between 0.1mV to 5mV. If the voltage exceeds 5.2mV,
open (cut off) R-171, -177, -189, -195, -183 and confirm that the voltage becomes 0.1mV to 5mV.

cut off

3P 0.22

R171(Lch),177(Rch)

R189(RLch),195(RRch),183(Cch)

MAIN (1)

R124(Lch),127(Rch)

R130(RLch),136(RRch),143(Cch)

R183

R143

R195

R136

R189

R177

R171

R130

R127

R124

12

HTR5130/RDS

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

■ TUNER ADJUSTMENTS

● Measuring Instruments

FM signal generator (FM SG)
Stereo signal generator (SSG)
AM signal generator (AM SG)
Distortion meter (DIST. M)
AC voltmeter (ACVM)
DC voltmeter (DCVM)
Oscilloscope
Low pass filter (YLF-15, fc=15kHz)
Oscillator

● Test point

● Dummy antenna

FM dummy antenna

E1

FM SG

)

(50

Ω

E2 (dB) = E1 (dB) -6 (dB)

FM dummy antenna

E1

FM SG

)

(50

Ω

AM dummy antenna

FM SG

)

(50

Ω

10

E2 (dB) = E1 (dB)

Ω

50

45

Ω

Ω

60

10K

Ω

Ω

E2

E2

RECEIVER

)

(75

Ω

RECEIVER

)

(75

Ω

AM ANT

GND

RX-V395/RDS

HTR5130/RDS

MONAURAL
DISTORTION
ADJ.

DISCRIMINATOR
BALANCE ADJ.

A,B,G,L
models only

SEPARA TION ADJ.

CB4

AM ANT

T1T3VR2T5T4

IC1

TP1

TP2

T2FI3

VR1

IC3

RDS models only

IC4

GND

PK2

FM ANT

FRONT END

IC2

AM SENSITIVITY
ADJ.

SIGNAL METER
ADJ.

IFT

Front
Panel

13

FM Adjustment

● Before Adjustment

1) For dB, 1µV=0dBµ

Example : 60dBµ=1mV

2) 100% modulation means that the frequency deviation is
± 75kHz.

● Connection diagram (Measuring instruments)

1) Discriminator balance adjustment

RX-V395/RDS HTR5130/RDS

3) Install the Matching Transformer and connect FM SG.

4) Set each switch to the following position unless other­wise specified.

INPUT SELECTOR.................. TUNER

TUNING MODE ....................... AUTO

3) Stereo distortion adjustment/separation adjustment

TP1

TP2

R25

DCVM

FM
SG

Oscillator

FM

dummy

antenna

FM
ANT

GND

TUNER
P.C.B.

2) Monaural distortion adjustment

L

R

REC
OUT

Oscilloscope

DIST.M

FM
SG

Oscillator

FM

dummy

antenna

FM
ANT

GND

TUNER
P.C.B.

See page 14 for TP locations & adjustment points.

Step

Adjustment item

Rough adjustment of

1

discriminator balance

Rough adjustment of

2

monaural distortion

Signal (ANT IN)

FM ANT (75Ω)

98.1MHz **
70dBµ
MONO 100Hz
100% modulation
Same as Step 1.

Reception

frequency

98.1MHz
* (A-4)

98.1MHz
* (A-4)

FM
SG

SSG

FM
dummy
antenna

4) Sensitivity Verification

FM
SG

Adjustment

point

T1
(Front side core)

T1
(Antenna side core)

FM
dummy
antenna

Both ends of R25
(Between TP1 and TP2)

REC OUT L, R

FM
ANT

GND

FM
ANT

GND

TUNER
P.C.B.

TUNER
P.C.B.

Test point

L
R

REC
OUT

L

R

REC
OUT

YLF-15

(LPF)

Oscilloscope

ACVM

DIST.M

DC 0V±100mV

Minimize the dis­tortion.

Oscilloscope

ACVM

DIST.M

Rating

Fine adjustment of

3

discriminator balance

Fine adjustment of

4

monaural distortion

Verification of dis-

5

criminator balance

Same as Step 1.

Same as Step 1.

Same as Step 1.

98.1MHz
* (A-4)

98.1MHz
* (A-4)

98.1MHz
* (A-4)

T1
(Front side core)

T1
(Antenna side core)

T1
(Front side core)

Both ends of R25
(Between TP1 and TP2)

REC OUT L, R

Both ends of R25
(Between TP1 and TP2)

*:Execution of FACTORY PRESET (Refer to page 11.) will facilitate setting reception frequency for adjustment.
** Must be 98.1MHz ± 5kHz

DC 0V±50mV

Minimize the dis­tortion (-41dB or
less).
DC 0V±50mV

14

HTR5130/RDS

RX-V395/RDS

RX-V395/RDS HTR5130/RDS

RX-V395/RDS

HTR5130/RDS

*:Execution of FACTORY PRESET (Refer to page 10.) will facilitate setting reception frequency for adjustment.
** Must be 98.1MHz ± 5kHz

Step

6

Adjustment item

Adjustment of
front end IFT

7

Verification of monau­ral distortion

8

Verification of stereo
distortion

9

Verification of sensi­tivity

10

Adjustment of
Separation

11

Adjustment of Signal
meter

12

Verification of auto
tuning

Signal (ANT IN)

FM ANT (75Ω)

98.1MHz **
30dBµ
MONO
1kHz,
100% modulation
FM ANT (75Ω)

98.1MHz
70dBµ
MONO 1kHz,
100% modulation
FM ANT (75Ω)

98.1MHz
70dBµ
Stereo L or R
1kHz,
100% modulation
FM ANT (75Ω)

88.1MHz

98.1MHz

106.1MHz
MONO 1kHz
100% modulation

FM ANT (75Ω)

98.1MHz
70dBµ
Stereo L or R
1kHz,
100% modulation
FM ANT (75Ω)

98.1MHz
45dBµ
MONO 1kHz
30% modulation
–10dBµ or less

FM ANT (75Ω)

98.1MHz
23dBµ
Stereo L or R
1kHz,
30% modulation

Reception
frequency

98.1MHz
* (A-4)

98.1MHz
* (A-4)

98.1MHz
* (A-4)
*Tuning

mode
should be
AUTO.

88.1MHz
* (A-6)

98.1MHz
* (A-4)

106.1MHz
* (A-7)

98.1MHz
* (A-4)

98.1MHz
* (A-4)

98.1MHz
* (A-4)

Adjusted

point

Front end IFT

VR2

VR1

Test point

Pin 16 of IC1

REC OUT L, R

REC OUT L, R

ANT (75Ω)

REC OUT L, R

Rating

Adjust so that the DC voltage
is maximum.
CAUTION : Over-adjustment
of the IFT core will reduce the
sensitivity.
Maximum ±90°

0.4%(-41dB) or less

1%(-33dB) or less

• STEREO indicator should
light.

1)Set the tuning mode to

MAN’L MONO.

2) S/N should be 30dB at each

frequency of 88.1MHz,

98.1MHz, and 106.1MHz.

3) Check to ensure that the

voltage at the ANT terminal
is 6dBµ or less.
(U,C,R,T : 6dBµ or less)

(A,B,G,L : 8dBµ or less)
With SSG output at L or R, the
signal leakage level at the
other channel should be mini­mized.
28dB or more

Adjust so that all segments
light.

Check to ensure that signal
meters turn OFF.

•Automatic reception
should be available when
the tuning key is moved UP
and DOWN.

•The stereo indicator should
light.

•Audio muting should be ap­plied during tuning.

15

AM Adjustment (This should be done after FM adjustment.)

● Connection Diagram (Measuring instruments)

1) Adjustment of sensitivity

AM loop antenna

RX-V395/RDS HTR5130/RDS

AM

AM

SG

AM

SG

GND

See page 13 for TP locations & adjustment points.

Step

1

2

3

Adjustment item

Adjustment of
sensitivity
(630kHz)

Verification of
sensitivity

Verification of
signal meter

Signal (ANT IN)

AM ANT
630kHz
50dBµ
1kHz
30% modulation
AM ANT
630kHz
1080kHz
1440kHz
30% modulation

AM ANT
1080KHz
90dBµ

-10dB or less

Reception
frequency

ANT

630kHz

* (B-1)

630kHz

* (B-1)

1080kHz

* (B-2)

1440kHz

* (B-3)

1080kHz

* (B-2)

TUNER

P.C.B.

Adjustment

point

T2

L
R

REC
OUT

Oscilloscope

Test point

REC OUT

AM ANT

ACVM

DIST.M

Rating

Signal meter should be
maximized

Distortion should be 10% or less at
each frequency.
Check to ensure that the voltage at
the ANT terminal is 54dBµ or less.

All signal meters should light.

All signal meter should turn OFF.

Verification of auto

4

tuning

AM ANT
60dBµ

Auto reception should be avail­able when the tuning key is moved
UP and DOWN.

*:Execution of FACTORY PRESET (Refer to page 10.) will facilitate setting reception frequency for adjustment.

16

HTR5130/RDS

RX-V395/RDS