Xerox WorkCentre 3655i WiFi Direct Enablement Setup Instructions

Wi-Fi Direct Enablement

Setup Instructions

Activation de Wi-Fi Direct

Instructions d'installation

Enabling Wi-Fi Direct Printing

Wi-Fi Direct, peer to peer connection for mobile clients, can be enabled on the following Xerox® products with a Wireless Network Adapter Kit.

• Xerox® WorkCentre® 3655i/6655i

• Xerox® WorkCentre 5865i/5875i/5890i

• Xerox® WorkCentre 5945i/5955i

• Xerox® WorkCentre 7220i/7225i

• Xerox® WorkCentre 7830i/7835i/7845i/7855i/7970i

Requirements:

• A wired-networked Multifunctional Printer with access to the Xerox® CentreWare® Internet Services

• USB dongle from the Wireless Adapter Kit

• Android mobile smartphone or tablet (Android™ 4.4 or later).

• Xerox® device software level of 073.xxx.xxx.34540 or newer

• Mopria Alliance Print Plug-in

Verifying the Software Level on a Xerox® Printer

At the control panel, press the Machine Status button.

073.xxx.xxx.xxxxx

Installing the USB Adapter

1. Retrieve the USB adapter from the kit. Store the remaining components in the kit for future use.

Wi-Fi Direct Enablement – Setup Instructions

Xerox

2. Power off the Xerox® WorkCentre. At the rear of the Xerox® WorkCentre printer, insert the adapter into the USB slot.

Note: Do not use the USB port on the front or the machine.

WorkCentre 7220i/7225i WorkCentre 78xxi Series and 7970i WorkCentre 58xxi Series and 59xxi Series WorkCentre 3655i/6655i

3. Power on the Xerox® WorkCentre.

Enabling the USB Network Interface Adapter for Wi-Fi Direct

1. Determine the IP address of the printer. At the printer control panel, press the Machine Status button. On the Machine Information tab, ﬁnd the IPv4 Address of the printer.

Note the IP Address for later use (xxx.xxx.xxx.xxx): ___.___.___.___

2. At your networked computer, open a web browser. In the address ﬁeld, type the IP address of the printer, then press Enter or Return. The Xerox® CentreWare® Internet Services web interface opens.

Note: For enhanced security, the Xerox® device web page is redirected using https. When https is ﬁrst used, many web

browsers alert you to a potential security issue. You can proceed to the web page and ignore the alert messages.

• In Internet Explorer, you may see this message:

To proceed to the website, click Continue to this website.

Wi-Fi Direct Enablement – Setup Instructions

Xerox

• In Google Chrome, you may see this message:

To proceed to the website, click Proceed anyway.

• In Mozilla Firefox, you may see this message:

To proceed to the website, click I understand the risks.

• In Apple Safari, you may see this message:

Click Continue to proceed to the website.

3. In the top-right area of the page, click Login.

4. Log in using the system administrator account. The default system administrator account is User ID: admin Default password: 1111

5. Click Login.

6. Ensure that the device is not in sleep mode. To exit sleep mode, touch the control panel.

7. In CentreWare Internet Services, click Properties > Connectivity > Setup.

8. Next to Wi-Fi Direct, click Edit.

Note: the Edit button is available after you install the USB wireless network adapter.

Xerox® Wi-Fi Direct Enablement – Setup Instructions

9. You can change the Device Name in the Convenience Link section. To accept the default name or proceed to the next step to make a change, click Close.

10. To change the Device Name, click Edit.

11. Enter the desired information. Enter the device name, then click Apply.

12. Conﬁrm the Device Name set in the previous step. To return to the Connectivity window, click Close.

Xerox®

Wi-Fi Direct Enablement – Setup Instructions

+ 14 hidden pages