Xerox WorkCentre 3550 Reference Guide

PDL Reference Guide for the

dc11cc0477

June 27, 2011

WorkCentre 3550

Customer Tip

Accessing Extended Features

Overview

This document enables you to access the extended features of the WorkCentre 3550 in environments that do not
have a custom print driver.

Note: The commands and syntax used in this document requires familiarity with either PostScript (PS) or Printer

This document provides the Printer Description Language (PDL) commands and syntax for each feature. The
following items are also included:

• A PCL table that describes the PCL features the WorkCentre supports and the syntax to use the feature.

• A PS table that describes the PS features the WorkCentre supports and the syntax to use the feature.

This document is not intended to be a complete PS or PCL reference manual. It is a guide for using the PS and PCL
commands with the WorkCentre 3550. Refer to these sources for additional PS and PCL information:

Command Language (PCL).

• PostScript Language Reference Manual, Third Edition, ISBN 0-201-38922-8,

• PCL5 Printer Language Technical Reference Manual

http://h20000.www2.hp.com/bc/docs/support/SupportManual/bpl13210/bpl13210.pdf

(

• Printer Job Language Technical Reference Manual

http://h20000.www2.hp.com/bc/docs/support/SupportManual/bpl13208/bpl13208.pdf), a Hewlett-Packard manual.

(

Using this Guide

 Search the Feature Table to determine whether the feature you wish to use is supported.
 Follow across the table to find the syntax listed for the PDL examples shown. Reference the

“Dependencies/Caveats” section when working with PS and/or PCL commands.

),

dc11cc0477
Customer Support Page 1