Xerox 7400-DX, 7400-DN User Manual

Page 1 of 3

Revision 2.0 July 2006

RecommendedXerox Media for Phaser Phaser 7400N, 7400DN, 7400DT,

7400DX, and 7400DXF (Europe)

Revision 3.0,July 2006

Last revision October 2005
This supersedes any previous Recommended Media for Xerox Phaser 7400N, 7400DN, 7400DT, 7400DX, and 7400DXF list.

Important Note:
All media is listed by product, Paper Type System Setting, Paper Type, weight (standard gsm), re-order number, size, and tray
runability. The additional information column is for hints and tips on how to run certain media applications.

Media recommendations made in this publication are based on qualification tests* conducted using standard test images with
moderate to heavy image area coverage. Test duration for each product/media type is based on the suggested machine monthly
copy/print volume. Test machines are maintained within specifications defined by user documentation.

* Testing environment Temperature 20 degreesC±4, Relative Humidity 40% ±10%.

* Machine reliability specifications may be affected by increased usage of the Transparency, Card Stock, Label, and Special modes.
In addition, variances in machine reliability may occur due to extended use of some media types. Your Xerox service representative
can advise you on special application media types for long duration copy/print runs.

For specifications and a description of the various media types discussed in this publication, please refer to www.Xerox.com.

For additional recommended Phaser media, look under Supplies on: http://www.office.xerox.com/ and select your Product Family.

© 2006 Xerox Corporation. All rights reserved.

Xerox® , The Document Company®, and all Xerox product names and product numbers mentioned in this publication are
trademarks of Xerox Corporation. Other company trademarks are also acknowledged.

Page 2 of 3

Revision 2.0 July 2006

Plain Heavy Plain
Glossy Coated Paper
Thin Card Thick Card Extra Thick Card
Labels Transparency

Paper

Xerox Colotech+ (Gold)

Xerox Digital Colour

Colotech+

Xerox Digital Colour

Impressions

Xerox Business

Xerox Recycled

Paper Type Weight Re-Order # Cross Reference # Type Size

Plain

Heavy Plain

Heavy Plain

Thin Card

Thick Card 200 gsm

Extra Thick

Plain 90 gsm

Thin Card

Plain 90 gsm

Thin Card

Extra Thick 250 gsm Paper Type Extra Thick Card should be selected on the user interface for Trays/MPT.

Plain

90 gsm

100 gsm

120 gsm

160 gsm

250 gsm

160 gsm

160 gsm

80 gsm

Plain 80 gsm 003R91165 A4

Xerox Premier Plain 80 gsm

Phaser 7400N, 7400DN,

7400DT, 7400DX, and

7400DXF

Revision 2.0

003R97988 A4
003R97990 A3
003R97991 SRA3

003R97993 A4

003R97958 A4

003R97963 A4
003R97964 A3
003R97965 SRA3

003R97967 A4
003R97968 A3
003R97969 SRA3

003R97975 A4
003R97976 A3
003R97977 SRA3

003R94641 A4

003R94656 A4
003R95841 SRA3

003R97663 A4
003R97664 A3
003R97665 SRA3

003R98007 A4
003R98008 A3

003R97671 A3
003R97672 SRA3

003R91820 A4
003R91823

4-hole

A4

003R91821 A3

003R91832 A5
003R91720 A4

A=Auto Duplex

M=Manual Duplex

S=Simplex Only

Trays

1/MPT 2 3 4 5 6

A A AAAA
A A AAAA
A A AAAA

A A AAAA

A A AAAA

A A AAAA
A A AAAA
A A AAAA

M
M
M

M
M
M

A A AAAA

A A AAAA
A A AAAA

A A AAAA
A A AAAA
A A AAAA

A A AAAA
A A AAAA

M
M

A A AAAA
A A AAAA
A A AAAA

A A AAAA

A A AAAA
A A AAAA

Refer to the "Paper Tips" embedded page for additional printer-specific information, e.g., High

Paper Type Plain should be selected on the user interface for Trays/MPT. For higher print gloss, use
the Heavy Plain setting.

Paper Type Heavy Plain should be selected on the user interface for Trays/MPT.

Paper Type Heavy Plain should be selected on the user interface for Trays/MPT.

Paper Type Thin Card should be selected on the user interface for Trays/MPT.

Paper Type Thick Card should be selected on the user interface for Trays/MPT.

Paper Type Extra Thick Card should be selected on the user interface for Trays/MPT.

Paper Type Plain should be selected on the user interface for Trays/MPT. For higher print gloss, use
the Heavy Plain setting.

Paper Type Thin Card should be selected on the user interface for Trays/MPT.

Paper Type Plain should be selected on the user interface for Trays/MPT. For higher print gloss, use
the Heavy Plain setting.

Paper Type Thin Card should be selected on the user interface for Trays/MPT.

Paper Type Plain should be selected on the user interface for Trays/MPT.

Paper Type Plain should be selected on the user interface for Trays/MPT.

Paper Type Plain should be selected on the user interface for Trays/MPT.

Additional Information

Capacity tray usage.