Whirlpool WOC54EC0HB, WOC54EC0HW, WOC75EC0HB, WOC54EC7HS, WOC54EC0HS Installation Instructions Manual

...

0 (0)

INSTALLATION INSTRUCTIONS

IMPORTANT:

IMPOR

À conserver pour consultation par l'inspecteur local des installations électriques.

27" (68.6 CM) AND 30" (76.2 CM) ELECTRIC

MICROWAVE/OVEN COMBINATION

FLUSH INSTALLATION KIT

INSTRUCTIONS D'INSTALLATION POUR TROUSSE

D'INSTALLATION EN AFFLEUREMENT D'UN

ENSEMBLE FOUR À MICRO-ONDES ÉLECTRIQUE/

FOUR DE 27" (68,6 CM) ET 30" (76,2 CM)

Flush Installation Kit Part Number

Ensemble d'installation en

afﬂeurement référence

W11173682 27” (68.6 cm), white WOC54EC7HW

W11173684 30” (76.2 cm), white WOC54EC0HW, WOC75EC0HW

W11173686 27” (68.6 cm), black WOC54EC7HB

W11173692 30” (76.2 cm), black WOC54EC0HB, WOC75EC0HB

W11173695 27” (68.6 cm), stainless steel WOC54EC7HS, WOC75EC7HS

W11123004 30” (76.2 cm), stainless steel

W11173701 27” (68.6 cm), black stainless WOC75EC7HV

W11173704 30” (76.2 cm), black stainless WOC75EC0HV

W11123006 30” (76.2 cm), bronze WOCA7EC0HN

Size and Color

Dimensions et couleur

UL Listed for Model Numbers

Homologation UL pour les modèles

numéro

WOC54EC0HS, WOC75EC0HS, WOC97EC0HZ, WOCA7EC0HZ

Table of Contents/Table des matières

BUILT-IN OVEN SAFETY ................................................................2

INSTALLATION REQUIREMENTS .................................................2

Tools and Parts .............................................................................2

Location Requirements ................................................................2

INSTALLATION INSTRUCTIONS ...................................................4

Prepare Built-In Microwave/Oven Combination ..........................4

Remove Oven Door ......................................................................4

Replace Oven Door ......................................................................5

Positioning Oven Feet ..................................................................5

Replace Plastic Spacers ..............................................................6

Install Oven ...................................................................................7

Install Deector Kit Bracket .........................................................7

Complete Installation ...................................................................8

SÉCURITÉ DU FOUR ENCASTRÉ ................................................9

EXIGENCES D’INSTALLATION .....................................................9

Outillage et pièces ........................................................................9

Exigences d’emplacement ...........................................................9

INSTRUCTIONS D’INSTALLATION .............................................11

Préparation de l’ensemble

des fours encastrés (micro-ondes/four) .....................................11

Dépose de la/des porte du four .................................................11

Réinstallation de la/des porte du four ........................................11

Positionnement des pieds du four .............................................12

Remplacement des cales d’espacement en plastique .............13

Installation du four ......................................................................14

Installation du support de la trousse du déecteur ...................14

Achever l’installation ..................................................................15

ve for local electrical inspector's use.

TANT :

W11115049A

BUILT-IN OVEN SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Tools Needed

■ Phillips screwdriver

■ Measuring tape

■ Drill (for wall cabinet installations)

■

/8" (3 mm) drill bit (for wall cabinet installations)

■ Level

■ Flat-blade screwdriver

Parts Needed

■ (4) #8-14 x 1" screws

■ (2) #8-18 x

built-in oven

■ Bottom vent included with built-in oven

Parts Supplied

■ Deector bracket

/8" screws - bottom vent included with

Location Requirements

IMPORTANT: Observe all governing codes and ordinances. NOTE: Refer to the following “Location Requirements” and the

“Location Requirements” section of the Installation Instructions provided with your built-in oven.

■ Cabinet opening dimensions that are shown must be used.

Given dimensions provide minimum clearance with oven.

■ Recessed installation area must provide complete enclosure

around the recessed portion of the oven.

■ Oven support surface must be solid, level and ush with

bottom of cabinet cutout.

■ The oor must be able to support a total weight (microwave

and built-in oven) of 208 lbs (95 kg) for 27" (68.6 cm) models or 249 lbs (113 kg) for 30" (76.2 cm) models.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate, or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

■ (2) Plastic spacers

■ #8-18 x

(4)for30"76.2 cm) models - deector bracket

■ (4) #8-18 x

■ (2) feet

■ (2) front feet

/4" screws - (2) for 27" (68.6 cm) models);

/8" screws - oven feet

Deﬂector Bracket Dimensions

27" (68.6 cm) Models

A. 2615/16" (68.4 cm) overall width

30" (76.2 cm) Models

A. 29

/16" (76.0 cm) overall width

Cabinet Dimensions - Flush Installations

A 25" (63.5 cm) minimum cutout depth is required. These dimensions will result in a 1/4" (6 mm) reveal on the top,

a 1/4" (6 mm) reveal on the sides, and a 1/8" (3 mm) reveal on thebottom of the wall oven.

The front face of the cleats and platform will be visible and should be treated as a nished surface.

Top View

27" (68.6 cm) Models

/2" x 2" (13 mm x 51 mm) spacer the entire depth of the cutout*

B. 25" (63.5 cm) depth of

cutout

C. 1

/8" (3.5 cm) recess from

front of cabinet

/16" (17 mm) side cleat*

30" (76.2 cm) Models

/2" x 2" (13 mm x 51 mm) spacer the entire depth of the cutout*

B. 25" (63.5 cm) depth of

cutout

C. 1

/8" (3.5 cm) recess from

front of cabinet

/16" (17 mm) side cleat*

* Cleats and spacers must be recessed 13/8" (3.5 cm) from the

front of the cabinet.

Front View Side View

27" (68.6 cm) Models

/8" (16 mm) top cleat*

B. 27

/4" (69.2 cm) minimum

width of ush inset cutout

C. 25

/8" (65.7 cm) minimum

width of opening

D. 43

/8" (109.5 cm) minimum

height of ush inset cutout

E. 42

/2" (107.9 cm)

recommended cutout height

/16" (17 mm) side cleat*

/2" x 2" (13 mm x 51 mm) spacer the entire depth of the cutout*

H. Recommended junction box

location

I. 4

48.9cm) bottom of cutout to oor

J. 25" (63.5 cm) minimum depth

of cutout

/8" - 19

" (11.7 cm -

30" (76.2 cm) Models

/8" (16 mm) top cleat*

B. 30

/4" (76.8 cm) minimum

width of ush inset cutout

C. 28

/8" (73.3 cm) minimum

width of opening

D. 43

/8" (109.5 cm) minimum

height of ush inset cutout

E. 42

/2" (107.9 cm)

recommended cutout height

/16" (17 mm) side cleat*

/2" x 2" (13 mm x 51 mm) spacer the entire depth of the cutout*

H. Recommended junction box

location

I. 4

48.9cm) bottom of cutout to oor

J. 25" (63.5 cm) minimum depth

of cutout

/8" - 19

" (11.7 cm -

* Cleats and spacers must be recessed 13/8" (3.5 cm) from the

front of the cabinet.

INSTALLATION INSTRUCTIONS

Prepare Built-In Microwave/Oven

Combination

NOTES:

■ Refer to the following “Installation Instructions” and

the “Installation Instructions” section of the Installation Instructions provided with your built-in microwave/oven combination.

■ Refer and adhere to the “Electrical Requirements” section

and complete the instructions in the “Make Electrical Connection” section of the Installation Instructions providedwith your built-in microwave/oven combination.

1. Decide on the nal location for the oven. Avoid drilling or cutting into house wiring during installation.

WARNING

4. Partially close the door to engage the door latch locks. The door will stop at this point.

Excessive Weight Hazard

Use two or more people to move and install oven.

Failure to do so can result in back or other injury.

2. To avoid oor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame for lifting.

3. Remove the shipping materials and tape from the oven. Remember to keep the corner posts and other materials thatmay be needed for installation.

4. Remove the hardware package from inside the bag containing literature.

5. Move oven and cardboard close to the oven’s nal location.

Remove Oven Door

IMPORTANT: Use two hands to remove oven door(s).

1. Prior to removing the oven door, prepare a surface where you will place it. This surface should be at and covered with a soft blanket, or use the corner posts from your packaging material.

2. Open the oven door.

3. Locate the oven door hinge locks in both corners of the oven

door, and rotate the hinge locks toward the oven door to the unlocked position. If the door hinge lock is not rotated fully (see illustration B), the door will not remove properly.

Locked position

Unlocked position

5. Using two hands, grasp the edges of the oven door. Lift and pull the oven door toward you and remove. You may need to gently shift door from side to side as you pull.

6. Set the oven door(s) aside on the prepared covered work surface, with the oven door resting on its handle.

7. To continue with the oven installation, go to the “Positioning Oven Feet” section.

Grip here to rotate.

A Oven door hinge lock

in locked position

arm on select models

B. Oven door hinge lock in

partially unlocked position

Soft close hinge

Replace Oven Door

1. Using two hands, grasp side edges of door at the midpoint. Face the oven cavity.

2. Locate the slots on each side of the oven cavity for the door hinge locks.

A. Slot in the oven cavity for door hinge lock

3. At a 45° angle, align door hinges with slots in the lower front of the oven cavity. Slowly insert door, making sure you maintain the 45° angle. You will know the door is engaged in the slot when you feel a slight drop.

6. Close the oven door.

7. When the hinges are properly installed and the door closed,

there should be an even gap between the door and the control panel. If one side of the oven door is hanging lower than the other, the hinge on that side is not properly installed.

Repeat the steps to remove then replace the oven door. See the “Remove Oven Door” and “Replace Oven Door” sections

Positioning Oven Feet

The oven feet need to be installed to allow a microwave/oven combination to be installed in a recommended cutout height of 421/2" (107.9 cm).

NOTE: Do not remove the spacers.

4. Lower the oven door to the fully open position. If the oven door does not open to a full 90 degrees, repeat steps 1 through 3.

5. Locate the oven door hinge locks in the corners of the oven door, and rotate the hinge locks toward the oven cavity to the locked position.

See Step 3 (illustration A) in the “Remove Oven Door(s)” section for proper locked position.

A. Spacers

1. Using 2 or more people, place the oven on its back on a covered surface.

+ 11 hidden pages