MVW18PDAXW0
Whir
TOP-LOADING
WASHER
USE AND CARE GUIDE
This manual contains useful information; read it before operating your washer.
Este manual contiene informaci6n Otil; por favor 16aloantes de operar su lavadora.
Table of Contents
WASHER SAFETY ......................................................... 2
CONTROL PANEL AND FEATURES ............................ 3
CYCLE GUIDE ............................................................... 5
USING YOUR WASHER ................................................ 6
WASHER MAINTENANCE ............................................ 9
TROUBLESHOOTING ................................................. 11
LAVADORA DE CARGA
SUPERIOR MANUAL DE
USO Y CUIDADO
P •
In&ce
SEGURIDAD DE LA LAVADORA ................................ 15
PANEL DE CONTROL Y CARACTER|STiCAS .......... 16
GUI,_, DE CiCLOS ........................................................ 18
USO DE SU LAVADORA ............................................. 19
MANTENiMiENTO DE LA LAVADORA ...................... 22
SOLUCi0N DE PROBLEMAS ..................................... 24
W10462977C
WASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
iMPORTANT SAFETY iNSTRUCTiONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,
including the following:
[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.
[] Do not add gasoline, dry-cleaning solvents, or other
flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.
[] Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. if the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.
SAVE THESE iNSTRUCTiONS
Do not allow cHdren to play on or in the washer. Close
supervision of children is necessary when the washer is used
near children.
Before the washer is removed from service or discarded,
remove the door or lid.
[] Do not reach into the washer if the drum, tub or agitator is
moving.
[] Do not install or store the washer where itwill be exposed to
the weather.
[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any
servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.
[] See "Electrical Requirements" located in the installation
instructions for grounding instructions.
2
CONTROL PANEL AND FEATURES
Not all features and options are available on all models.
LOAD SIZE allcoldrinses
TEMPERATURE
Mode 3DWTW4740
LOAD SIZE
O
Select the setting most suitable for your load. Small will add
a low amount of water for smaller loads and Super will add
the most amount of water for large or bulky loads. Items
need to move freely. Tightly packing can lead to poor
cleaning performance, and may increase wrinkling and
tangling.
TEMPERATURE
Temperature control senses and maintains uniform
water temperatures by regulating incoming hot and
cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
* Warm and hot water will be cooler than what your
previous washer provided.
. Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
DRAIN & SPiN
OPTIONS (on some models)
Thefollowing options may be added to most cycles.
EXTRA RINSE
This option can be used to automatically add a second
rinse to most cycles.
FABRIC SOFTENER ADDED-YES
This option must be selected if using fabric softener
during a cycle. It ensures that fabric softener is added
at the correct time in the rinse for even distribution.
FABRIC SOFTENER ADDED with EXTRA RINSE
This option turns on both the Fabric Softener and the
Extra Rinse options.
WASH CYCLE KNOB
O
Use the Wash Cycle knob to select available cycles on your
washer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
START/PAUSE/UNLOCK BUTTON
O
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: if the washer is spinning, it may take several
minutes to unlock the lid. Press and hold for 3 seconds
to cancel a cycle.
LID LOCKED
O
To allow for proper spin operation, the lid
will lock and the Lid Lock light will turn on.
This light indicates that the lid is locked
and cannot be opened.
If you need to open the lid, press
START/Pause/Unlock. The lid will
unlock once the washer movement
has stopped. This may take several
minutes ifthe load was spinning at
high speed. Press START/Pause/
Unlock again to resume the cycle.
Lid Locked
Hold
START
Pause/Unlock
@ CYCLE STATUS INDICATORS
Cycle Status
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
FILL/SENSING
When the START/PAUSE button is pressed, the washer
will fill to the selected water level. If the lid is closed
when the machine is done filling the lid will lock and the
machine will begin operation.
If the lid is open when the water stops entering the
machine, the cycle will not begin until the lid has been
closed and the START/PAUSE button is pressed. If the
cycle has not been started within 10 minutes of the water
filling the washer, the washer will pump out the water.
NOTE: Avoid opening lid during Fill/Sensing phase.
The sensing process will start over when the washer is
restarted. The sensing light may also come on during the
Soak and Wash portions of the cycle. This is normal. To
restart the washer after the lid has been opened press
start.
Fill Wash Rinse Spin Done
WAS H
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle.
The wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear the
motor turning on briefly (short hum) to move the basket
while filling. Fabric softener will be added if the Fabric
Softener Added-Yes option was selected.
Some cycles use spray rinsing. After draining and
spinning out wash water, the washer will continue to
spin and spray in rinse water for the entire rinse time.
SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
4
CYCLE GUIDE
For best fabric care, choose the cycle that best fits the load being washed.
Not all cycles and options are available on all models.
Sturdy fabrics,
colorfast items,
towels, jeans
Sturdy fabrics,
colorfast items,
towels, jeans
Cottons, linens,
sheets, and mixed
garment loads
Lightweight
cotton fabrics
No-iron fabrics,
cottons, perm
press, linens,
synthetics
Lightly-soiled
no-iron fabrics
and synthetics
Large items such
as sleeping bags,
small comforters,
jackets
Machine-wash
silks, lingerie,
washable wools
Heavily soiled
fabrics
Swimsuits and
items requiring
rinsing without
detergent
Dripping wet or
hand-washed
items
NOTE: Be sure to select Fabric Softener Added-Yes, if adding fabric softener to load (depending on model).
*All rinses are cold.
Super
Wash
Normal
Heavy
Normal
Regular
Normal
Light
Casual or
Casual
Regular
Casual
Light
Bulky
Items
Delicate
Soak
Rinse &
Spin
Drain &
Spin
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Hot
Warm
Cool
Cold
Cold rinse only
N/A
High
High
High
High
Low
Low
Low
Low
No Spin
High
High
Provides maximum wash time and action for tough stains
and soils. Use this cycle for heavily soiled or sturdy items.
Water-level sensing process may take longer for some
items than for others because they will absorb more water
than other fabric types.
Use this cycle for heavily soiled or sturdy items. This cycle
uses spray rinses or deep rinse if the Fabric Softener Added
- Yes option is selected (on some models). Use this cycle for
cleaning the interior of the washer. See "Washer Care."
Use this cycle for normally soiled cottons and mixed fabric
loads. This cycle uses spray rinses only. This cycle uses
spray rinses or deep rinse if the Fabric Softener Added -
Yes option is selected (on some models).
Use this cycle for lightly soiled mixed loads. This cycle uses
spray rinses only. This cycle uses spray rinses or deep rinse
if the Fabric Softener Added - Yes option is selected (on
some models).
Use this cycle to wash loads of no-iron fabrics such as
sport shirts, blouses, casual business clothes, permanent
press, and blends.
Use this cycle to wash lightly-soiled loads of no-iron fabrics
such as sport shirts, blouses, casual business clothes,
permanent press, and blends.
Use this cycle to wash large items such as jackets and
small comforters. The washer will fill with enough water
to wet down the load before the wash portion of the cycle
begins. Do not tightly pack basket.
Use this cycle to wash lightly soiled garments indicating
"Machine Washable Silks" or "Gentle" cycle on the care
label. Place small items in mesh garment bags before
washing.
Use this cycle to soak small spots of set in stains on
fabrics. The washer will use intermittent agitation and
soaking. After time has expired, water will drain, but the
washer will not spin. Cycle is complete.
Combines a rinse and high speed spin for loads requiring
an additional rinse cycle or to complete a load after a power
failure. Also use for loads that require rinsing only.
This cycle uses a spin to shorten drying times for heavy
fabrics or special-care items washed by hand. Use this
cycle to drain washer after cancelling a cycle or completing
a cycle after a power failure, j
USING YOUR WASHER
SUPER CAPACITY and SUPER PLUS CAPACITY WASHERS
LOADING
To these recommended loads of full volume, set the load size control in the largest load position.
Heavy Work Clothes Mixed Load Towels Delicate
3 pairs of pants 3 double sheets 10 bath towels 3 camisoles
3 shirts 4 pillow cases 10 hand towels 1 house coat
4 pairs of jeans 8 t-shirts 14 washcloths 4 slips
1 mechanic suit 6 pair of shorts 1 bath mat 4 panties
1 pair of overalls 2 shirts 2 bras
2 blouses 2 nightgowns
8 scarves 1 baby dress
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
= Sort and prepare your laundry
= Empty pockets. Loose change, buttons, or any small object
can pass under the agitator and become trapped, causing
unexpected sounds.
= Sort items by recommended cycle, water temperature,
and colorfastness.
= Separate heavily soiled items from lightly soiled.
= Separate delicate items from sturdy fabrics.
* Do not dry garments if stains remain after washing, because
heat can set stains into fabric.
* Treat stains promptly.
. Close zippers, fasten hooks, tie strings and sashes, and
remove non-washable trim and ornaments.
= Mend rips and tears to avoid further damage to items
during washing.
Helpful Tips:
* When washing water-proof or water-resistant items, load
evenly.
6
Bectrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
. Use mesh garment bags to help avoid tangling when washing
delicate or small items.
,, Turn knits inside out to avoid pilling. Separate lint-takers from
lint-givers. Synthetics, knits, and corduroy fabrics will pick up
lint from towels, rugs, and chenille fabrics.
NOTE: Always read and follow fabric care label instructions to
avoid damage to your garments.
2= Add detergent
Add a measured amount of detergent into the bottom of the
washer basket before adding clothes. If using an Oxi or
color-safe bleach laundry boost product, add to the bottom
of the washer basket, as well.
iMPORTANT: Follow the manufacturer's instructions to
determine the amount of detergent to use.
3, Load laundry into washer
Load garments in loose heaps evenly
around basket wall. For best results, do
not pack the load tightly. Do not wrap large
items such as sheets around the agitator;
load them in loose piles around the sides
of the basket. Try mixing different sized
items to reduce tangling.
iMPORTANT: Do not tightly pack or force items into washer.
Items need to move freely for best cleaning and to reduce
wrinkling and tangling.
Add liquid chlorine bleach
to dispenser
Add fabric softener to dispenser
(on some models)
Pour a measured amount of liquid fabric
softener into dispenser; always follow
manufacturer's directions for correct amount
of fabric softener based on your load size.
Dilute liquid fabric softener by filling the
dispenser with warm water until liquid reaches the underside
of the rim. See max fill line arrows. Then select Fabric Softener
Added-Yes option or Fabric Softener Added with Extra Rinse
option. Do not allow liquid fabric softener to spill, splash, drip,
or run into the basket or on load.
iMPORTANT: Fabric Softener Added option must be selected
to "Yes" to ensure proper distribution at correct time in cycle.
Adding Liquid Fabric Softener Manually to Wash Load
(For models without fabric softener dispenser)
During the final rinse, wait until the washer has completed
filling, press the START/Pause/Unlock button to pause the
washer. Lift the lid and add the measured recommended
amount of liquid fabric softener. Do not allow liquid fabric
softener to spill, splash, drip, or run into the basket or on load.
Do not use more than the recommended amount. Close the
lid and press the START/Pause/Unlock button again to start
the washer.
Do not overfill, dilute, or use more than 1 cup (250 mL).
Do not use color-safe bleach or Oxi products in the same
cycle with liquid chlorine bleach.
Select cycle
Normal Cycles
HEAVY
SUPER
WASH CASUAL
DRAIN & SPIN li BULKY
RINSE & SPiN DELICATE
SOAK
Model 3DWTW4840 shown
Turn cycle knob to choose your wash cycle. For more
information, see "Cycle Guide".
REGULAR
LIGHT
ITEMS
7, Select LOAD SiZE
LOAD SIZE
Model 3DWTW4840 shown
Select the load size setting most suitable for your load. Small
will add a low amount of water for smaller loads and Super will
add the most amount of water for large or bulky loads. Items
need to move freely.
Select options, if desired
(on some models)
EXTRARINSE FABRICSOFTENER
ADDED
Model 3DWTW4840 shown
Select the desired cycle options. If you are using fabric
softener, be sure to select one of the Fabric Softener Added-
Yes options.
8, Select TEMPERATURE
Coo\
TEMPERATURE
all cold rinses
Model 3DWTVV4840 shown
Once you select a cycle, select the desired wash temperature
by turning the Temperature knob to the appropriate setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Ternp
: Hot
ii
Some cold water is added to save
ii
energy. This will be cooler than
ii
: your hot water heater setting.
Warm
Some cold water will be added, so Bright colors
this will be cooler than what your Moderate to light soils
Whites and pastels
Durable garments
O= Press START/Pause/Unlock
to begin wash cycle
START
Pause/Unlock
3 sec to
cancel
Hold 0
m m
Press the START/Pause/Unlock button to start the wash
cycle. When the cycle has finished, the DONE indicator will
light. Promptly remove garments after cycle has completed
to avoid odor, reduce wrinkling, and rusting of metal hooks,
zippers, and snaps.
IMPORTANT: After the washer basket fills to the selected
water level, the lid must be closed before the wash cycle
can start. If filling stops with the lid open, close the lid and
press START button.
Unlocking the lid to add garments
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause/Unlock; the lid will unlock once the
washer movement has stopped. This may take several
minutes ifthe load was spinning at high speed. Then close
lid and press START/Pause/Unlock again to restart the cycle.
If lid is left open for more than 10 minutes, the water will
pump out automatically.
Cool
Warm water may be added to
assist in soil removal and to help
Colors that bleed
or fade
dissolve detergents.
Cold
This is the temperature from your Dark colors that
faucet. If your tap cold water is bleed or fade
very cold, warm water may be Light soils
added to assist in soil removal and
help dissolve detergent.
8
WASHER MAINTENANCE
WATER iNLET HOSES
Replace inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace inlet hoses if
bulges, kinks, cuts, wear, or leaks are found.
When replacing your inlet hoses, mark the date of replacement
on the label with a permanent marker.
WASHER CARE
Recommendations to Help Keep Your Washer Clean
and Performing at its Best
1. Always follow the detergent manufacturer's instructions
regarding the amount of detergent to use. Never use more
than the recommended amount because that may increase
the rate at which detergent and soil residue accumulate
inside your washer, which in turn may result
in undesirable odor.
2. Use warm and hot wash water settings sometimes (not
exclusively cold water washes), because they do a better
job of controlling the rate at which soils and detergent
accumulate.
3. Always leave the washer lid open between uses to help
dry out the washer and prevent the buildup of odor-causing
residue.
Cleaning Your Top Loading Washer
Read these instructions completely before beginning the
routine cleaning processes recommended below. This Washer
Maintenance Procedure should be performed, at a minimum,
once per month or every 30 wash cycles, whichever occurs
sooner, to control the rate at which soils and detergent may
otherwise accumulate in your washer.
Cleaning the Inside of the Washer
To keep your washer odor-free, follow the usage instructions
provided above, and use this recommended monthly cleaning
procedure:
Recommended Cycle for Cleaning the Washer
Refer to the "Cycle Guide" for the optimal cycle for cleaning
the inside of the washer. Use this cycle with washer cleaner
or liquid chlorine bleach as described below.
Begin procedure
1. Washer Cleaner Cycle Procedure {Recommended for
Best Performance):
ao Open the washer lid and remove any clothing or items.
bo Place a washer cleaner tablet in the bottom of the
washer basket.
co Do not place a washer cleaner tablet in the detergent
dispenser.
d. Do not add any detergent or other chemical to the
washer when following this procedure.
eo Close the washer lid.
fo Select the cycle recommended for cleaning the inside
of the washer.
g. Press the START/PAUSE button to start the cycle.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press START/PAUSE once or twice
(depending on model). After the cycle has stopped, run a
RINSE & SPIN cycle to rinse cleaner from washer.
F WASHER CARE (cont.) "_
2. Chlorine Bleach Procedure {Alternative):
ao Open the washer lid and remove any clothing
or items.
b. Add 1 cup (236 mL) of liquid chlorine bleach
to the bleach compartment.
NOTE: Use of more liquid chlorine bleach than is
recommended above could cause washer damage
over time.
co Close the washer lid.
d. Do not add any detergent or other chemical
to the washer when following this procedure.
eo Select the cycle recommended for cleaning the inside
of the washer.
f. Press the START/PAUSE button to start the cycle.
NOTE: For best results, do not interrupt cycle. If cycle
must be interrupted, press START/PAUSE once or twice
(depending on model). After the cycle has stopped, run a
RINSE & SPIN cycle to rinse cleaner from washer.
Cleaning the Dispensers
After a period of using your washer, you may find some
residue buildup in the washer's dispensers. To remove
residue from the dispensers, wipe them with a damp cloth
and towel dry. Do not attempt to remove the dispensers or
trim for cleaning. The dispensers and trim are not removable.
If your model has a dispenser drawer, however, remove the
drawer and clean it before or after you run the Clean Washer
cycle. Use an all-purpose surface cleaner, if needed.
Cleaning the Outside of the Washer
Use a soft, damp cloth or sponge to wipe away any spills.
Use only mild soaps or cleaners when cleaning external
washer surfaces.
IMPORTANT: To avoid damaging the washer's finish, do not
use abrasive products.
r
NON=USE AND VACATION CARE
Operate your washer only when you are home. If moving, or
not using your washer for a period of time, follow these steps:
1. Unplug or disconnect power to washer.
2. Turn off water supply to washer, to avoid flooding due
to water pressure surge.
f WINTER STORAGE CARE
iMPORTANT: To avoid damage, install and store washer
where it will not freeze. Because some water may stay in
hoses, freezing can damage washer. If storing or moving
during freezing weather, winterize your washer.
To winterize washer:
1. Shut off both water faucets; disconnect and drain water
inlet hoses.
2. Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run
washer on RINSE & SPIN cycle for about 30 seconds
to mix antifreeze and remaining water.
3. Unplug washer or disconnect power.
Loading...