W box technologies WBXHDD281P4W, WBXHDD287P4W, WBXHDD281P4G, WBXHDD28127P4W, WBXHDD28127P4G User Manual

High-Resolution IR Camera

User Manual

WBXHDD28127P4W(G)
WBXHDD287P4W(G)
WBXHDB28127P4W(G)	If you have any questions, please
WBXHDB367P4W(G)	contact your ADI salesperson.
WBXHDD28121P4W(G)
WBXHDD281P4W(G)
WBXHDB28121P4W(G)
WBXHDB361P4W(G)

High-Resolution IR Camera
User Manual	Hardware Connection

Precautions

Precautions

Fully understand this document before using this device, and strictly observe rules in this document when using this device. If you install this device in public places, provide the tip "You have entered the area of electronic surveillance" in an eyecatching place. Failure to correctly use electrical products may cause fire and severe injuries. To prevent accidents, carefully read the following context:

Symbols

This document may contain the following symbols whose meanings are described accordingly.

Symbol	Description
	It alerts you to fatal dangers which, if not avoided, may
	cause deaths or severe injuries.
	It alerts you to moderate dangers which, if not avoided,
	may cause minor or moderate injuries.
	It alerts you to risks. Neglect of these risks may cause
	device damage, data loss, device performance
	deterioration, or unpredictable results.
	It provides a tip that may help you resolve problems or
	save time.
	It provides additional information.

To prevent electric shocks or other dangers, keep power plugs dry and clean.

Strictly observe installation requirements when installing the device. The manufacturer shall not be held responsible for device damage caused by users' nonconformance to these requirements.

Issue V1.0 (2018-03-20)

i

	High-Resolution IR Camera
Hardware Connection	User Manual

Strictly conform to local electrical safety standards and use power adapters that are marked with the LPS standard when installing and using this device. Otherwise, this device may be damaged.

Use accessories delivered with this device. The voltage must meet input voltage requirements for this device.

If this device is installed in places with unsteady voltage, ground this device to discharge high energy such as electrical surges in order to prevent the power supply from burning out.

When this device is in use, ensure that no water or any liquid flows into the device. If water or liquid unexpectedly flows into the device, immediately power off the device and disconnect all cables (such as power cables and network cables) from this device.

Do not focus strong light (such as lighted bulbs or sunlight) on this device. Otherwise, the service life of the image sensor may be shortened.

If this device is installed in places where thunder and lightning frequently occur, ground the device nearby to discharge high energy such as thunder strikes in order to prevent device damage.

Avoid heavy loads, intensive shakes, and soaking to prevent damages during transportation and storage. The warranty does not cover any device damage that is caused during secondary packaging and transportation after the original packaging is taken apart.

Protect this device from fall-down and intensive strikes, keep the device away from magnetic field interference, and do not install the device in places with shaking surfaces or under shocks.

Clean the device with a soft dry cloth. For stubborn dirt, dip the cloth into slight neutral cleanser, gently wipe the dirt with the cloth, and then dry the device.

Do not jam the ventilation opening. Follow the installation instructions provided in this document when installing the device.

Keep the device away from heat sources such as radiators, electric heaters, or other heat equipment.

Keep the device away from moist, dusty, extremely hot or cold places, or places with strong electric radiation.

If the device is installed outdoors, take insectand moisture-proof measures to avoid circuit board corrosion that can affect monitoring.

Remove the power plug if the device is idle for a long time.

Before unpacking, check whether the fragile sticker is damaged. If the fragile sticker is damaged, contact customer services or sales personnel. The manufacturer shall not be held responsible for any artificial damage of the fragile sticker.

ii	Issue V1.0 (2018-03-20)

High-Resolution IR Camera
User Manual	Hardware Connection

Special Announcement

All complete products sold by the manufacturer are delivered along with nameplates, operation instructions, and accessories after strict inspection. The manufacturer shall not be held responsible for counterfeit products.

This manual may contain misprints, technology information that is not accurate enough, or product function and operation description that is slightly inconsistent with the actual product. The manufacturer will update this manual according to product function enhancement or changes and regularly update the software and hardware described in this manual. Update information will be added to new versions of this manual without prior notice.

This manual is only for reference and does not ensure that the information is totally consistent with the actual product. For consistency, see the actual product.

Issue V1.0 (2018-03-20)

iii

	High-Resolution IR Camera
Hardware Connection	User Manual

			Contents
1 Hardware Connection .............................................................................................			5
2 Eyeball Camera.........................................................................................................			6
	2.1	Dimensions.....................................................................................................................	6
	2.2	Device Installation..........................................................................................................	7
3	Bullet camera ..........................................................................................................		10
	3.1	Dimensions...................................................................................................................	10
	3.2	Device Installation.........................................................................................................	11
4	Technical Specifications.......................................................................................		14

iv	Issue V1.0 (2018-03-20)

High-Resolution IR Camera
User Manual	Hardware Connection

1 Hardware Connection

Figure 1-1 shows the power and video cables.

Figure 1-1 Power and video cables

Connect the BNC connector of the power or video cable to a video signal cable and connect the other connector to a low-voltage power cable (12V DC). After installing the camera, directly connect the video cable and power cable.

The BNC video output interface is used to emit composite video signals. Monitors with a resolution of higher than 800 TVL are recommended.

Issue V1.0 (2018-03-20)

5