Wacom DTF-720 - OTHER, PL-720 User Manual

INTERACTIVE PEN DISPLAY

PL-720

User's Guide

사용 설명서

使用手冊
使用手册

ENGLISH

한국어

中文（繁體）中文（簡体）

Model No.: DTF-720

00_PL720_UZ-0332(C)_Cov.indd 101

07.11.29 10:16:32 AM

Table of Contents

Safety Precautions ..................................................2

Component Functions ..............................................5

Adjusting the stand ............................................................................... 6

Installing PL-720 on a Mount Arm .......................................................... 6

Accessory Check .....................................................7

Connecting PL-720 .................................................8

Installing PL-720 Driver ...........................................10

Windows Setup .................................................................................... 10

Mac OS X Setup ................................................................................... 11

Uninstalling the Tablet Driver ................................................................. 11

The PL-720 Display .................................................12

The Auto-Adjust Function ....................................................................... 12

The PL-720 Power Saving Function ......................................................... 12

Blurring and Protrusion of the Picture from the LCD Panel... ...................... 13

On-Screen Display (OSD) Menu Buttons ................................................. 14

Using the OSD Menu ............................................................................ 14

Basic operation ......................................................17

How to use the Tablet Buttons ................................................................. 17

Using the Control Panel ...........................................18

Displaying the Control Panel .................................................................. 18

Control Panel Basics .............................................................................. 18

Synchronizing the Positions of the Pen Tip and Pointer ............................. 21

Using Multiple Interactive Pen Displays ...................22

Supplementary Information ....................................23

Removing Stains ................................................................................... 23

Replacing the Pen Nib ........................................................................... 23

Troubleshooting ......................................................24

Display Troubleshooting ........................................................................ 24

Pen Troubleshooting (For Both Windows and Macintosh) ......................... 25

General Troubleshooting ....................................................................... 25

Troubleshooting for Windows ................................................................ 25

Troubleshooting for Macintosh ............................................................... 26

Specifi cation ...........................................................26

Obtaining Technical Support .................................27

PL-720 User's Guide

ENGLISH

01_PL720_UZ-0332(C)_En.indd 1

07.11.27 6:56:05 PM

2

Safety Precautions

■

Regarding the power plug and power

adapter.

-Please remove dust from the power
plug regularly. The addition of moisture,
etc. to accumulated dust may lead to
fi re.

-Please do not use any power adapters
other than those included with the
product. Ignoring this warning may
result in fi re or product failure.

-Please do not damage or forcibly
bend or bundle the power adapter
cord. Also, please do not place heavy
objects on it or expose it to excessive
heat. Ignoring this warning may result
in fi re, electric shock or product failure.

-In the unlikely case that the power
adapter should produce smoke or a
strange odor, please disconnect it from
the wall outlet and return it to either the
store where you purchased it or to the
Wacom Customer Support Center for
repair service.

-Please do not connect or disconnect
the power adapter with wet hands.
Ignoring this warning may result in
electric shock or malfunction.

-Please do not open or otherwise
change the power adapter. Ignoring
this warning may result in fire or
electric shock.

In order to prevent this, when in such
locations, always disconnect the product’
s USB connector from your computer
and turn off the switch.

■

Do not open the back cover.

Inside this product there are several
high-voltage parts. Persons other than
professional service personnel should
never open the back cover of this
product. Unauthorized opening of the
back cover may lead to fire or electric
shock.

■

When this product ceases to operate
normally due to being dropped or a
similar cause, remove the power source
cable from the electrical outlet.

Leaving the power cable connected may
result in fi re or electric shock.

This product may cause other electronic
devices to malfunction, or other devices
may cause this product to malfunction.

■

Turn this product off in places where
the use of electronic equipment is
prohibited.

In airports, hospital intensive care units
and other such places where the use
of electronic equipment is prohibited,
this product may adversely affect the
operation of other electrical devices.

The following symbols appear throughout this user guide in order to ensure safe use of
the PL-720 (hereafter referred to as “PL-720,” “the product” or “this product”). Please
read these items carefully and always heed the Warning and Caution items when using
your PL-720.

This symbol indicates an item that, if ignored when handling the product,
could lead to the loss of life or serious injury.

Warning

This symbol indicates an item that, if ignored when handling the product,
could lead to injury or damage to personal property.

Caution

Meanings of Symbols:

Indicates that it is important to be careful when taking the action or actions noted.

Indicates that the action or actions noted are to be avoided.

Indicates it is important to take the action or actions noted.

Warning

■

Do not use the product in a facility
control system that requires an
extremely high level of reliability.

01_PL720_UZ-0332(C)_En.indd 2

07.11.27 6:56:06 PM

3

of time, disconnect the power adapter
from the electrical outlet.

■

Do not use this product in a dusty

environment.

Dust can cause damage to the product.

■

Do not block the ventilation holes on

the backside of the product.

Blocking these holes may cause internal
overheating and subsequent damage.

■

Do not pick up the product by its stand.

If excessive force is used in handling the
stand, its open and close function may
become damaged. When picking up the
product, always pick it up by the body.

■

When connecting the power plug

When plugging the power adapter into an
electrical outlet, also connect a grounded
wire.

■

When not using this product for a long

period of time

For safety reasons, when you will not be
using the product for a considerable length

■

Do not use organic solvents to clean

this product.

When cleaning the product, never use
such organic solvents as alcohol. Such
solvents may cause discoloration and
deterioration in quality.

■

When cleaning this product, always

disconnect the USB connector.

When cleaning the product, always
disconnect the USB connector from the
USB port of the computer. Failure to do so
may result in electric shock.

■

While this product is in use, avoid

placing any metal objects on it.

Do not place any metal objects on the
product while you are using it. This may
result in malfunction or product failure.

■

Do not touch any liquids that may be

leaking from this product.

The liquid contained in the product is an
irritant. In the unlikely case that such liquid
should leak, never touch it with bare hands.
In case of contact with skin, mouth or eyes,
rinse immediately with running water and
continue rinsing for 15 minutes or longer.
Also consult a physician.

■

Do not use excessive force with the cable.

Please do not step on, or place heavy
objects on any of the product’s cables.
Also, do not apply excessive force to the
base of the cable or repeatedly bend and
stretch it, as this may cause it to break or
malfunction.

■

Do not place the product in either very

hot or very cold places.

Do not place the product in very hot (35
degrees centigrade or more) or very cold
(5 degrees centigrade or less) locations.
Also, avoid placing it in locations with
severe temperature fluctuations as this
may adversely affect the product and
cause product failure.

■

Do not disassemble the

product.

Do not disassemble or modify the
product, as these actions may
lead to fi re, excessive generation
of heat, electrical shock or injury.
The guarantee on the product
will become null and void if the
product is ever disassembled.

Caution

■

Do not let the product get wet.

Please do not place containers
such as cups and vases containing
water near the product. Coming in
contact with water or other liquids
may cause product failure.

■

Regarding the Pen

-Do not strike hard objects with the
metal Pen. Doing so may cause
damage to the product.

-Be careful to not allow small children
to put either the pen or the spare nib
into their mouths. There is the danger
that the nib or side switch may be
accidentally swallowed or that the pen
may be damaged.

■

Do not place the product on

unstable surfaces.

Do not place the product where it is
likely to totter, lean or be exposed
to strong vibrations. Doing so may
lead to the product falling, resulting in
injury and/or product failure.

■

Do not place heavy objects

on the product.

Do not put excessive weight, or place
heavy objects on the product. These
actions may cause product failure.

01_PL720_UZ-0332(C)_En.indd 3

07.11.27 6:56:07 PM

4

Caution

1 Wacom Company, Ltd. holds the copyright to the

auxiliary tablet.

2 The unauthorized duplication or reproduction in

whole or in part of the tablet driver or this user guide
is expressly prohibited.

3 Wacom reserves the right to change the

configurations or specifications of the tablet driver
or the product, as well as the contents of this user
guide, without prior notice

.

As a participant in the Energy Star program,

Wacom has determined that this product meets
the standards of the Energy Star program.

Please take the following precautions
to protect the health of your eyes.

●

When using the product, make sure that the
room is suffi ciently illuminated and be careful not
to get your face too close to the screen.

●

Take regular breaks when using the product over an
extended period of time.

Warranty Exclusions

Regarding Trademarks

●

Wacom is a trademark or registered trademark of
Wacom Company, Limited.

●

Windows is a trademark of Microsoft Corporation,
registered in the United States and other countries.

●

Macintosh is a trademark of Apple Computer, Inc.,
registered in the United States.

●

Other product names and related items are the
trademarks or registered trademarks of each
concerned company.

Precautions

Depending on what is being displayed, bright or dark

green, red and blue dots may show up on a very
small portion of the LCD display screen. These do not
indicate product failure or a lack of quality.

●

Wacom will not bear any responsibility for damage
caused by fire, earthquake, accidents caused by
third persons, intentional or accidental abuse by the
customer or any other damage caused by abnormal
use of the product.

●

Wacom will not bear any responsibility for
contingent damages (such as loss of business
profi ts, suspension of operations, alterations to and
disappearance of data, etc.) caused by use of, or
inability to use, this product.

●

Wacom will not bear any responsibility for damage
resulting from the use of this product in a fashion
other than as explained in this user guide.

●

Wacom will not bear any responsibility for damage
resulting from malfunctions caused by using this
product in conjunction with adaptation equipment or
other company’s software.

Regarding this User's Guide

This user's guide contains instructions regarding the
set up, installation, functions and methods of use of
this product. The product consists of the LCD monitor
and the tablet, which will act as two distinct pieces of
equipment to be used in conjunction with your computer.
First, you will set up the display device and then you will
install the tablet driver in your computer. You will then be
able to use this product as a built-in display tablet.

Analog RGB compatible video output is necessary

for the screen display of this product. For information
regarding how to use video cards, refer to the instruction
manual accompanying the video card

.

Please be aware of the following
regarding the LCD display.

■

Do not connect or disconnect any cable while the product or your

computer is on.

Do not connect or disconnect any cable (including the USB cable) or the power adapter
while your computer or this product is turned on. This may cause damage to the product or
to your computer.

01_PL720_UZ-0332(C)_En.indd 4

07.11.27 6:56:08 PM

5

Menu Button

ー

Button

＋

Button

ENTER Button

Status LED

Power LED

Power Switch
Application Software

Buttons

Integrated LCD Monitor
and Tablet

Tablet Buttons

→

P17

The Status LED becomes blue to
indicate pen activity.

An orange light indicates that power is
being supplied. A blue light indicates
that power and a video signal is being
supplied.

→P14

Component Functions

Front

Back

Stand→P6

Stand Adjustment Lever→P6

Connector Ports→P8-9

USB2.0Hub

A USB 2.0 hub is available on both the left and
right sides of the PL-720.

Pen Rest

Place the pen here while the pen is not in use.

Pen Tether hole

01_PL720_UZ-0332(C)_En.indd 5

07.11.27 6:56:09 PM

6

Adjusting the Stand

1

Pull up on the stand adjustment lever.

 

Please hold the stand carefully as
you adjust it to prevent injury or
damage to the product.

2



Lower the stand carefully.

1

2

Caution

Installing PL-720 on a Mount Arm

This product conforms to the Video Electronics Standard Association’s (VESA) Flat
Panel Monitor Physical Mounting Interface Standard (FPMPMI).
This product can be removed from the stand and mounted on such apparatuses as
a VESA-standard mount arm. In order to do this, M4/0.7 mm screws, which are not
included with the product, are needed. Use screws that will, at the time of installation,
penetrate the surface of the product by no more than 15 mm. Use of longer screws
may result in damage to internal parts of the
product.

1

Make sure that both your computer and the
product are turned off and that all cables are
disconnected.

2

Place the display unit face down on a flat
surface. To prevent harm to the front of the
unit, fi rst spread a cloth or similar material on
the fl at surface as a cushion.

3

Remove the four screws that hold the stand to
the unit.

4

Using four M4/0.7mm screws, securely mount
the arm or similar apparatus to the back of the
unit.

5

Connect the cables and save the screws that
you removed in step 3.

Caution

When installing the unit on a mount arm or

other stand, always follow the directions in
the instruction booklet for the mount arm or
stand, as well as the instructions contained
in this document. Incorrect installation may
result in the product coming loose and falling,
possibly causing product failure.

01_PL720_UZ-0332(C)_En.indd 6

07.11.27 6:56:09 PM

7

●

USB Cable

●

Power Adapter

●

Power Cable/AC Power Cord

●

Pen

●

User's Guide (This booklet)

●

Analog RGB Cable

User's Guide

●

Pen Tether

Accessory Check

●

Tablet Driver CD-ROM

●

Application CD-ROM

Do no throw the box away; it is useful for the storage and transport of the product.

●

Adapter Plug (US type)

●

Adapter Plug (UK type)

01_PL720_UZ-0332(C)_En.indd 7

07.11.27 6:56:10 PM

8

1

Be sure that the power is off on both your computer and the product.

2

Connect the Analog RGB cable to your computer’s display port.

3

Connect the power adapter to the power cable and connect the DC power connector to
the DC power input terminal. Next, plug the power cable into your electrical outlet.

4

Turn on the product’s power switch.

The Power LED lamp will fl ash blue then turn orange.

5

Turn on your computer.

6

While looking at the LCD screen, confi gure the color resolution and size settings.

- Do not modify the refresh rate. Setting the rate to a value that exceeds the PL-720
refresh rate may result in loss of picture.

- The color palette settings and corresponding number of colors displayed are as follows:

High Color (16 bit) → 65,536 colors / True Color (24 bit) → Roughly 1,619 colors

*The number of colors is limited by the effi ciency of your computer and video card. For details,
refer to the user’s manual provided by the manufacturers.

7

Connect the product to the computer using the USB cable. You may notice that the pen
now responds when placed near the screen surface, but will function properly only after
the driver has been installed.

8

Install the PL-720 driver (Please refer to “Installing PL-720 Driver” on page 10).

Connecting PL-720

01_PL720_UZ-0332(C)_En.indd 8

07.11.27 6:56:11 PM

9

PL-720RearView

ConnectorsArea

USBconnector

（Output）

（Input）

AnalogRGBconnector

Tomonitororprojector

AnalogRGBconnector

AnalogRGBcable

Powercable*

PowerAdapter

DCPowerInputTerminal

Outlet

Computer

Computer

ToanalogRGBport

USBcable

ToUSBport

2

3

7

* Please use the proper power cord or adapter plug for your region.

01_PL720_UZ-0332(C)_En.indd 9

07.11.27 6:56:11 PM

10

Windows Setup

Before installation, connect the PL-720 USB cable to your computer and turn the unit on.
Please note that the driver for Windows 98 SE and Me are no longer included on the
tablet driver CD-ROM. If you plan to use your PL-720 with a PC running Windows 98
SE or Me, please download the appropriate driver from http://www.wacom-asia.com/
download/download_index.html

Installing the Tablet Driver

1

Insert the tablet driver CD into the CD-ROM drive. The install menu should automatically

display. If the menu does not display, double-click on the INSTALL icon (located on the

CD).

2

The install menu will appear. When you click on INSTALL TABLET, the LICENSE AGREE-

MENT dialog will appear.

3

Click Accept.

4

When the installation fi nishes, click OK.

5

Next, install the button driver.

6

Click NEXT in the WELCOME TO WACOM BUTTON DRIVER VER.x.xx SETUP dia

log.

7

The LICENSE AGREEMENT dialog will appear. Click Next.

8

Follow the prompts to install the driver software.

9

The INSTALLWIZARD COMPLETE dialog will appear. Click FINISH.

10

Return to the install menu. Click FINISH.

11

See "How to use the Tablet Buttons" section (P17) for more info about tablet buttons.

Installing PL-720 Driver

01_PL720_UZ-0332(C)_En.indd 10

07.11.27 6:56:12 PM

11

Mac OS X Setup

1

Connect the USB cable to your computer, turn on the product and start up your Macintosh.

2

Close any open applications and temporarily turn off any virus-monitoring programs.

3

Insert the Tablet Driver CD-ROM into your computer’s CD-ROM drive and open the

CD-ROM and double-click on Install or Install.app.

4

Click on Install Wacom Tablet and installation will begin. Thereafter, follow the screen

instructions and continue the installation process.

If during processing, the identity confi rmation dialog box displays, input your password *.

5

After the tablet driver installation is complete, restart Macintosh.

Uninstalling the Tablet Driver

Windows

When uninstalling the tablet driver from your PC follow the instructions below. (These
instructions are the same for Windows XP/2000/Me/98SE.)
*Users of Windows XP/2000 with system administrator settings in place (administrator
or administrator account) should log in with the administrator user name to uninstall the
drivers.

1

Click on the Windows Start button and open the Control Panel. Double click the Programs

and Features icon or the Add and Delete Program (Application) icon.

2

Select Pen Tablet from the list and click the Uninstall or the Modify (Add) and Uninstall or

Delete button. Follow the instructions in the dialog box to initiate uninstall.

If Windows is restarted, it is deleted.

Macintosh

1

Open the Applications folder and then open the Tablet folder.

2

Start up Remove Tablet and follow the instructions to initiate uninstall.

*

After installing OS X, input your password.

Macintosh OS x 10.2 and newer versions include as a standard feature the

Inkwell function. If this function is on, the yellow Inkwell memo pad will appear
after installation of the Tablet Driver. To disable this function, click on Ink from
the Control Panel, click on Settings and remove the checkmark from Allow Me to
Write Anywhere.

01_PL720_UZ-0332(C)_En.indd 11

07.11.27 6:56:12 PM

12

The PL-720 Display

This product is in compliance with VESA and ENERGY STAR power-saving guidelines.
When connected to a Display Power Management (DPMS)-compatible computer and
graphics board, the power savings indicated below are automatically realized during
times of non-operation.

Computer
Activity

Horizontal
Synchronizing
Signal

Vertical
Synchronizing
Signal

Picture
Signal

Power
Consumption

Power Lamp

Turned On Yes Yes Yes 37W or less Blue
Stand-by Mode No Yes No Less than 2W Orange/Blue*
Suspend Mode Yes No No Less than 2W Orange/Blue*
Off Mode No No No Less than 1W Orange

* Depending on the specifi cations and settings of your computer and video card, when in

standby and suspend modes, the power lamp may only light up orange.

The PL-720 Power Saving Function

In order to ensure optimal display image quality, this product utilizes the Auto-Adjust
function. When the Auto-Adjust function is operating, it may take a short time before the
screen displays properly. The settings initiated by Auto-Adjust are saved in the display.

If the Auto-Adjust function is operating, the horizontal and vertical positions as well as the phase
and pitch of the display are adjusted automatically when the display mode is received. The Auto­ Adjust function becomes operational when the horizontal frequency is in the 30-80KHz and the
vertical frequency is in the 50-75Hz range.

When the Auto-Adjust function is operating, only the power switch is operational.

Pen calibration may be necessary after adjusting screen position. (→ P13)

The Auto-Adjust Function

01_PL720_UZ-0332(C)_En.indd 12

07.11.27 6:56:13 PM

13

Blurring and Protrusion of the Picture from the LCD Panel

Depending on the type of computer and graphics board, the Auto-Adjust function
is sometimes not able to operate at full power, resulting in the picture blurring and
protruding from the LCD panel. If
this happens, adjust the pitch and
phase. At 1280 x 1024 pixels, the
resolution is optimally adjusted.

Procedure:

1

Open the Tablet Control Panel
(see page 18) and select the

Calibrate tab.

2

Click on the Calibrate... button.
An adjustment pattern for pitch
and phase will appear.

3

Using the OSD buttons, open the
OSD Menu and select the Pitch icon.

4

Adjust the pitch level so
the pattern of fine vertical
stripes displays evenly.

5

Press the ENTER button
and return to the Menu
screen.

6

In the OSD Menu, select the
Phase icon.

7

Adjust the phase level so
the adjusutment pattern
shows clearly.

8

After completing these

adjustments, press the EN-

TER and MENU buttons to exit the OSD Menu.

For Windows system except Windows XP, the pitch and phase may be calibrated after the Exit
Windows screen is displayed. If the frequency needs to be calibrated, light and
dark vertical stripes will appear in the dark areas of the screen. If the tracking needs to be
calibrated, light and shade will appear horizontally in the dark areas of the screen (for 1280 x
1024 resolution).

This method is recommended in situations where the tablet driver has not been installed.

Adjustment pattern for pitch and phase



This setting is effective when the product and computer are connected by a RGB cable.

2

1

01_PL720_UZ-0332(C)_En.indd 13

07.11.27 6:56:13 PM

14

MENU

ー＋

ENTER

Using the OSD Menu



How to Use the OSD Menu

Example:Adjustingbrightness

1

Click on the Menu button to display the Main Menu

Settings screen.

2



Click on the ＋ button and the

-

button and select the items

to be adjusted.

3

When the option you want to adjust is highlighted, press the
ENTER button.Use the + and - buttons to adjust numerical
values and other items.

4



After making your change, press the ENTER button to save.

5

To exit, press the Menu button.



buttons

,+

buttons

：

You can select an option that can
be activated.After activatng a
selected option, press the + button
to increase a selected item value,
and press the - button to decrease
it.

Menu button

：

Opens or closes the OSD

Menu.

ENTER Button

Activates or deactivates the selected OSD
menu item.

On-Screen Display (OSD) Menu Buttons

Adjusting picture quality and setting up the display are accomplished by using the OSD
menu buttons to establish and change adjustment items and values. Click on the Menu
button and the OSD menu screen appears. Select the items to be adjusted and your
desired settings.

+

button can select to the right direction.

-

button can select to the left direction.

+

button can increase numeric value.

-

button can decrease numeric value.

01_PL720_UZ-0332(C)_En.indd 14

07.11.27 6:56:14 PM

15



Menu Position

Reset

Provides two
options:
Use AUTO ADJUST
to reset only the
image parameters.
Use RECALL to
reset all screen
options to the factory
default. Selecting the
exit '

'icon exits the Reset window without

resetting anything.

Brightness

Contrast

Select to increase
or decrease image
contrast.

Types of OSD Menus

Select to move the
OSD menu around
the display.

Color



Backlight



Language

Provides settings for 9300K, 6500K, and
5000K Kelvin.
Also provides a User option that enables you
to adjust red, blue and green independently.

Selecting DIRECT
displays the received
signal as it is without
any adjustment.
Choose a setting to
work with and press
Enter to activate
your selection.
You can change
the user setting by
selecting the icon '

'.
In the User
Adjustment window,
change red, blue
and green to
calibrate color. To

exit, select the icon '

'.

Select to increase or
decrease the backlight
brightness level.

Select to choose a
language option for
the OSD: English,
Deutsch, Francais,
Espanol, Italiano, or
Japanese.

Cannot be
adjusted if DIRECT
is selected in the
Color menu.

Cannot be
adjusted if DIRECT
is selected in the
Color menu.

Select to increase
or decrease image
brightness.

01_PL720_UZ-0332(C)_En.indd 15

07.11.27 6:56:18 PM

16



Vertical Center

Select to move the
screen image up or
down.
To automatically
adjust, use the Reset
menu.



Horizontal Center

Select to move the
screen image left or
right.
To automatically
adjust, use the Reset
menu.

Pitch

Select to reduce or
eliminate vertical
distortion lines.
To automatically
adjust, use the Reset
menu.

Phase

Select to reduce or
eliminate horizontal
distortion lines.
To automatically
adjust, use the Reset
menu.

01_PL720_UZ-0332(C)_En.indd 16

07.11.27 6:56:19 PM

17

How to use the Tablet Buttons

Component Functions

NO Name Function

1

Left mouse button

Works like the left mouse button.

2

Right mouse button

Works like the right mouse button.

3

Scroll up button

Scrolls the window up.

4

Scroll down button

Scrolls the window down.

5

Ctrl button

Works like the Ctrl button on the keyboard.

1２

3

４55

The tablet buttons increase your work efficiency by making navigating through
documents and websites quick and simple.

The tablet buttons can be used in Windows-based PCs. To use the tablet buttons, install the button
driver to your PC. (▶P10)

Basic operation

01_PL720_UZ-0332(C)_En.indd 17

07.11.27 6:56:20 PM

18

Using the Control Panel

Change the settings for the pen and adjust the pointer and pen tip positions with the
control panel.
*When connecting and using multiple tablets, see page 22.

Displaying the Control Panel

Opening the Control Panel in Windows

Click on the Windows Start button, go to All Programs (P) or Programs (P), open Tablet
and select Pen Tablet

Opening the Control Panel in Macintosh

Open System Preferences from either the Dock, the Apple Menu or from the Applications
folder. Then click on the Pen Tablet icon.

NO Setting Item Description

1

The second side switch
and the side switch

Selects the side switch button functions for pens equipped with a side
switch. See page 19-20.

2

Tip Feel

Customizes the amount of pressure needed to click or draw with the pen.

3

Double Click Distance

Adjusts the size of the double-click area. See page 19.

4

Click Sound

When checked, an audible “click” sound will be heard whenever a pen click
occurs and your computer speakers are turned on.

5

Default

Returns the PEN tab settings to their factory defaults.

6

Advanced

When the Side Switch is set to right click or other click functions, select one
of the following two modes of operation.

• Hover Click: allows you to perform click functions by pressing the Side
Switch when the pen tip is raised slightly above the active surface.

• Click & Taps: press the Side Switch and then lightly press the pen tip
against the active surface. This is the default setting for tablet PCs.

Control Panel Basics

Select the PEN tab.

2

3

5

1

4

6

01_PL720_UZ-0332(C)_En.indd 18

07.11.27 6:56:20 PM

19

Switch and Button Settings

Function Names Description

Click
Right Click
Middle Click

Performs the same operations as a normal mouse.

4th click(Back)

Simulates a 4th mouse button click, which on Windows systems typically

issues the Back command in browser applications. Not available on
Macintosh systems.

5th click(Forward)

Simulates a 5th mouse button click, which typically issues the Forward

command in browser applications. Not available on Macintosh systems

Double-Click

Simulates a left mouse button double-click. For easier double-clicking,

use this function instead of tapping twice with your pen.

Click-Lock

Simulates holding down the left mouse button. Press the tool button once

to initiate click lock. Press the button again to release click lock. Click
lock is useful for dragging objects or selecting blocks of text.

Pop-up Menu

Displays a Pop-up Menu on your screen. See page 20 for more

information.

Erase

Works like the eraser on a pencil in graphic applications that support the

Erase function.

Keystroke

Enables you to simulate a series of keystrokes. Selecting this option

displays the defi ne keystroke dialog box, where you can enter a keystroke
or keystroke sequence to play back. Keystroke combinations can include
letters, numbers, function keys (such as F3) and modifi er keys (such as
SHIFT, ALT, or CTRL for Windows, or SHIFT, OPTION, COMMAND, and
CONTROL for Macintosh).

Modifi er

Enables you to assign modifier key(s) (such as SHIFT or CTRL). Many

applications use modifier keys to constrain the size or placement of
objects. Selecting this option displays the DEFINE MODIFIER dialog box
where you can assign one or more modifi er key functions.

Pan/Scroll

Pan/Scroll allows you to move an open fi le or image within a window. This

function can only be set to the Side Switch.

In an application that does not provide a free-hand tool, scroll speed can

be set to one of 5 speeds. Move the slider to the desired setting.

•Slow: reduces scroll speed

•Fast: increases scroll speed.

Pressure Hold

* Displays only with the use of the

Side Switch or Second Side Switch.

Sets the button so that, when pressed, the pressure is locked at the

current pressure level until the button is released. For example, you can
paint with pressure sensitivity until you reach the bush size that you like.

Mode Toggle

Toggles between Pen Mode and Mouse Mode.

ITablet PC Input Panel

In Windows Vista and tablet PCs, this function will open the tablet PC

input panel.

01_PL720_UZ-0332(C)_En.indd 19

07.11.27 6:56:21 PM

20

Function Names Description

Journal

This function opens Microsoft Journal, an application for Windows Vista

and tablet PC.

Open/Run

Opens an application or fi le.
This function will open a dialog box. Click Browse to select an application

or file. The selection you make appears in the Application To Run box.
Click "OK" to accept the selection.

Ink Toggle Lets you use your pen to toggle the Ink Anywhere function of Inkwell on

and off. Note that Ink must be turned on for this button function to work.

Default Settings

Click on this button and all settings return to their default settings.

Disabled

Disables the button function.

Customizing the Pop-up Menu

Use the POP-UP MENU tab to defi ne the available functions on the Pop-up Menu list.
To display the Pop-up Menu, set a tool button to the POP-UP MENU function. Whenever
you press that button, the Pop-up Menu is displayed. Select from available items in the
Pop-up Menu by clicking on them. To close the Pop-up Menu without making a selection,
click outside of the Pop-up Menu.

NO Setting Item Description

1

Button function

Select a button function to add to the Pop-up Menu list.

2

Remove

Removes the selected item from the list.

3

Pop-up Items

Displays a list of functions that have been added to the

Pop-up Menu. To change the order of an item, drag it to
a new location. Double-click on an item to make edits.

4

Pop-up Font and Font Size

Sets the FONT and FONT SIZE of the Pop-up Menu.

5

Default

Returns all tab settings to their default values.

This action will delete all Pop-up Menu items that have
been defi ned.

1

2

3

4

5

01_PL720_UZ-0332(C)_En.indd 20

07.11.27 6:56:21 PM

21



Synchronizing the Positions of the Pen Tip and Pointer

Make the necessary adjustments so that when the pen nib is brought near the LCD
screen, the pointer displays properly in the area where the pen nib is placed.

*Please refer to pages 12 and 13 to make screen image adjustments.
*Please refer to page 22 when using multiple Interactive Pen Displays.

1

Click on Calibrate... and the screen used for

making adjustments will appear.

2

Click in the middle of the cross mark in the

upper left-hand corner of the screen while
sitting in your normal seating position with
the pen nib and the cross mark will move to
the bottom right-hand side of the screen.

3

Click again in the middle of the cross mark

that is now in the bottom right-hand corner
of the screen while sitting in your normal
seating position and the cross mark will
disappear. The process of synchronizing
positions is now complete.

Click on the OK button in the

lower part of the screen to close
the screen.

01_PL720_UZ-0332(C)_En.indd 21

07.11.27 6:56:22 PM

22



Using Multiple Interactive Pen Displays

When multiple Interactive Pen Displays are connected and are to be used, it is
necessary to set up the pen and calibrate for each Interactive Pen Displays individually.
Please follow the procedures below to carry this out.

1

Bring the pen tip near the display for which the setup is to take place. Verify that the point­er moves in conjunction with the pen tip.

2

Open the control panel. (P18)

3

Open the Calibrate tab and verify that the correct monitor name is displayed in the Moni­tor fi eld.

●

If Another Monitor Name is Displayed in the Monitor Field...

The control panel of a different Interactive Pen Display is being displayed. Press the
ESC key on the keyboard to close the control panel and, beginning with Step 1,
repeat the above procedure to display the correct control panel.

*If the monitor name is changed without displaying the control panel, the display will not be able to be set
up.

【

Important

】

When more than one Interactive Pen Display is connected, the control panel of the last display to
recognize the pen tip is displayed. Even after identifying the pointer, if you use the pen on
another display to open its control panel, the pen tip is recognized and the control panel of this
display opens. Please refer to the following example.

 Example ＞ SettingupdisplayAwhendisplayAanddisplayBareconnected.

1. The pointer is identifi ed by display A.

2. The control panel of display A is displayed.→OK
The pen is used on display B to display the control panel→NOT OK (This carries out the
setup of display B)
The computer mouse is used on display B to display the control panel→OK

4

Please refer to pages 12 and 13 to make screen image adjustments.
To set up the pen, open the PEN tab, refer to “Switch and Button Settings” on page 19

and carry out the setup.

5

Repeat Steps 1 – 4 to set up another tablet.

01_PL720_UZ-0332(C)_En.indd 22

07.11.27 6:56:22 PM

23

Remove the pen nib Insert a new nib

Please prevent children from placing the pen or pen nib in their mouths.
There is the danger that the nib may be pulled out and swallowed. If the pen

is placed in the mouth, it may be damaged.

Supplementary Information

Using a pair of tweezers or a
similar tool, pull the nib out of
the pen.

Insert the new nib, firmly pushing
it in until it stops.

Removing Stains

If the product casing or pen becomes soiled, wipe off with a clean, soft cloth.
If this fails to remove the stains, soak a clean, soft cloth with a water-diluted detergent
mixture, wring thoroughly and wipe off.
If the protective covering for the LCD display becomes soiled, wipe with a dry, soft cloth.
If the stain is diffi cult to remove, try moistening the cloth slightly.

Do not use detergents for cleaning. The use of detergents may adversely
affect the performance of the pen. Also, do not use organic solvents, as they
may cause surface discolouration.

Replacing the Pen Nib

When the pen nib becomes worn down so that it is 1mm or less in length, replace it as
shown in the illustration below. If the pen nib becomes worn down and angular in shape,
it can easily damage the surface of the protective covering of the LCD display.

01_PL720_UZ-0332(C)_En.indd 23

07.11.27 6:56:23 PM

24

Message

Display Troubleshooting

What to Do

Prior to connecting the product, if you have a monitor that you have been
using, connect it and then adjust the horizontal frequency to 30–80 kHz
and the vertical frequency to 50 –75 Hz. Connect the product.

- Verify that the video signal cable* is connected.

- Verify that the video signal cable connector pins are not bent or broken.

• When the computer goes in to power saving mode, move the mouse or
press any keyboard key.

• Verify that the computer graphics board is correctly installed.

• Verify that the video signal cable is connected.

• Verify that the video signal cable connector pins are not bent or broken.

• If you are using a cable other than the video signal cable that was
included with the product, this message may appear prior to the computer
going into power-saving mode. The product is not out of order. Use the
cable that was included to connect the product.

If One of These Messages Should Appear...

Troubleshooting

* Video signal cable indicates both USB cables (see page 7).



If One of These Conditions Should Appear...

Condition

The power lamp lights up or­ange or orange and blue.

The power lamp doesn’t light
up and the screen doesn’t dis­play.

The screen doesn’t display
even when the power switch
is turned on.

The picture is distorted
The picture appears wavey
The picture fl ickers

The picture is not clear

The picture appears doubled
or in triplicate

The picture is out of position
The picture size is incorrect

The picture is dark.
Waves and vertical stripes

appear in the picture.
The picture colour is uneven.
The colour white does not

display as white.

What to Do

• Verify that the video signal cable is connected.

• Verify that the video signal cable connector pins are not bent or broken.

• When the computer goes in to power saving mode, move the mouse or
press any keyboard key.

• Verify that the computer graphics board is correctly installed.

• Verify that the power cable is connected and turn the power switch on.

•Adjust the pitch and phase.

•Verify that your computer display adapter is compatible with the product.

•Verify that the graphics mode and frequency for the input signal are
compatible with the product.

•Adjust the computer’s refresh rate (vertical frequency) for optimal display.

•Adjust the contrast and brightness.

•Adjust the pitch and phase.

•Set your computer’s resolution to SXGA (1280 x 1024).

•Do not add an extension to the video signal cable and refrain from using
the input selector.

•Connect the video signal cable fi rmly to the connector.

•Adjust the pitch and phase.

•Adjust the horizontal and vertical positioning. Depending on the input
signal and video card, the picture may not entirely fi ll the screen.

•Adjust the brightness.

•Adjust the pitch and phase.

•Adjust the colour temperature.

01_PL720_UZ-0332(C)_En.indd 24

07.11.27 6:56:23 PM

25

Pen Troubleshooting (For Both Windows and Macintosh)

Condition

The pen nib produces a click
even when only very lightly
coming in contact with the
screen.

The pen does not produce
a click unless excessive
pressure is used.

The pen nib produces a click
prior to coming into contact
with the screen.

The pen nib do not work.

The pen cannot be double­clicked using the pen nib.

The pressure function cannot
be used.

What to Do

Use the control panel to set the pen nib sensitivity to Firm setting.

Use the control panel to set the pen nib sensitivity to Soft setting.

Use the control panel to set the pen nib sensitivity to Firm setting.
When the status lamp turns blue in response to the pen nib being moved

to close proximity to the screen, either the pen or the tablet is probably
defective.

Please verify that the status lamp turns blue when the pen nib and side

switch are pushed. If the lamp doesn’t change colours, this probably
indicates that either the pen or the tablet is probably defective.

If possible, quickly click in the same area.
In the control panel, set the double-clicking interval to a longer setting and

set the pen nib sensitivity to a lighter setting.

Verify that the double-click speed setting is not too fast in the regular

mouse control panel.

Please refer to your software application and the store where you bought

the application to verify whether it is pressure function-enabled. Some
applications have special settings that must be established before the
pressure function becomes operational.

The tablet driver probably is not installed properly. Try re-installing it.

Condition

When a replacement computer
is purchased or new software
is used, the tablet cannot be
used.

The tablet, which is connected
to a USB hub, doesn’t
respond.

What to Do

Installing the newest version of tablet driver may resolve this problem. The
newest tablet driver can be downloaded from the Wacom homepage.
>http://tablet.wacom.co.jp/

Some USB hubs cannot recognize tablets. Connect the tablet directly to
the computer’s USB port.

General Troubleshooting

Troubleshooting for Windows

Condition

Even when connected to
the USB port, the pen is
inoperable.

When Windows is in DOS
full screen mode, moving the
pointer with the pen becomes
impossible.

If the mouse is set for left­handed use in the regular
mouse control panel, the
ability to click with the pen nib
is lost.

What to Do

•Check the connection of the USB connector. If using a USB hub
connection, try connecting directly to the computer’s USB port.

•When the product model type appears in the Unknown Device list, select
it and click the Delete button, canceling all settings for it. Next, click the
Renew button and, following the directions in the New Hardware dialog
box, re-install the tablet driver.

•If use of the USB port is advantageous, open the Control Panel folder and
then the System folder. Then open, in order, the Hardware and Device
Manager folders. Next, check and make sure that USB (Universal Serial
Bus) Controller appears in the list that is displayed. If it isn’t present, it
will be necessary to adjust your computer. Please consult your computer
maker regarding this.

When using a DOS mouse, the pen is inoperable. You must use another
mouse.

Restart Windows.

01_PL720_UZ-0332(C)_En.indd 25

07.11.27 6:56:24 PM

26

Troubleshooting for Macintosh

Condition

Even when connected to

the USB port, the pen is
inoperable.

The product always reverts to

mouse mode and the pressure
function cannot be used.

What to Do

-Check the connection of the USB connector. Connect directly to the
computer’s USB port.

-If equipped with a USB card, the system software has probably not been
installed properly.

-If you have any other high-speed, high-power USB peripherals, connect
these and check and see whether they operate properly or not. If these
other units operate properly, this would seem to indicate that the tablet is
defective.

The tablet driver may not be properly installed. Try reinstalling it.

General Specifi cations

Physical dimensions(W D H):400 × 362 × 55.5 mm (excluding stand)
Weight: 6.0kg (including stand)
Main unit input voltage: DC12V
Power consumption: 37 W or less (DC12 V)
Usage temperature and
humidity ranges: 5–35 degrees C, 20–80%RH (conditions where condensation does not form)
Storage temperature and
humidity ranges: -10–60 degrees C, 20–90%RH (conditions where condensation does not form) (at 60

degrees C maximum storage humidity is 38%; at 90% humidity, maximum storage
temperature is 42 degrees)

LCD Display Specifi cations

Display: a-Si TFT Active Matrix LCD
Screen size: 17 inches
Resolution (75Hz Max.): 1280 × 1024 dot (SXGA), 1024 × 768 dot (XGA), 800 x 600 dot(SVGA), 640 × 480 dot

(VGA)
Pixel pitch: 0.264(W) × 0.264 (H) mm
Display dimensions: 337.92 × 270.36mm
Color depth: 253 level; 16,190,000 colors
Signal inputs: Analog RGB input 0.7 Vp-p, 75Ω, straight polarity
Synchronous inputs : TTL level, 2.2 kΩ, polarity freedom (horizontal / vertical separation

or composite synchronous input)
Synchronous frequency: horizontal: 30 – 80 kHz; vertical 50 – 75 Hz.(When resolution

is 1024 × 768 dot (XGA), vertical frequency is in the 45-70Hz range)
Scanning method: all non-interlace
Plug and Play: DDC2B

* On rare occasions, light and dark dots may appear on a small part of the display screen. This condition does not

indicate product failure.

* Afterimages may remain on the screen after still images have been displayed for a long period of time, but these will

disappear after a short period of time.

Tablet Specifi cations

Reading method: Electromagnetic induction method
Maximum reading range: 337.92 × 270.336mm
Reading resolution: Maximum 20 lpmm (0.05 mm)
Reading accuracy: +/- 0.5 mm; four corners( 25mm wide, 80mm long from esch corner of four "L" shaped

area) to be +/- 2.0 mm.
Maximum reading height: 5mm
Data transfer rate: Maximum 100 points per second
Pressure level: 512 levels
Interface: USB

Pen Specifi cations

Pressure functions: Pen nib switch
Pen nib switch type
/retraction motion:

Non-retractable/0.2 mm or less

Load when pen nib is switched on:

30 g or less

Physical dimensions and weight:

12.5 × 146.5 mm, 10 g

Specifi cation

01_PL720_UZ-0332(C)_En.indd 26

07.11.27 6:56:24 PM

27

Obtaining Technical Support

If you experience a problem with this product that cannot be solved by referring to this
guide or the manual included with your driver CD, please refer to our online FAQ or
contact our support staff.

Online FAQ: http://www.wacom-asia.com/faq/faq_index.html

Email: http://www.wacom-asia.com/contact/contact_index.html

Phone support is available from 9:00 am - 6:00 pm on weekdays:

Tel: [phone], Fax: [phone]

(International calling fees differ by region.)

-------------------------------------------------

Support for Hong Kong residents is available from Wacom Hong Kong Ltd.

URL: www.wacom.com.hk

Tel: [phone], Fax: [phone]

Email: sales:wacom.com.hk

-------------------------------------------------

Regarding Limited Warranty in the Asia Pacifi c region (excluding China and Hong Kong)

Wacom Co., Ltd. warrants the product, to the original consumer purchaser, including the

main unit and accessories such as the AC adapter and cables, to be free from defects in

materials and workmanship under normal use and service for a period of one (1) year,

from the date of original retail purchase, as evidenced by a copy of the receipt (proof of

purchase) or if issued, the warranty card from your local reseller or distributor. Wacom's

Limited Warranty Policy for Asia Pacifi c can be found on the Asia Pacifi c website at:

www.wacom-asia.com/technical/warranty/img/Limited_Warranty_AP.pdf

Premium Extended Warranty Service is available in Asia Pacifi c

http://www.wacom-asia.com/technical/warranty/premiumwarranty.html

01_PL720_UZ-0332(C)_En.indd 27

07.11.27 6:56:25 PM