VTech CS6709, CS6709-16 User Manual

User’s manual

T

Compatible with

Hearing Aid T-Coil

TIA-1083

CS6709/CS6709-15/CS6709-16

DECT 6.0 accessory handset
for use with VTech models

CS6719/CS6729/CS6758/CS6759/
CS6829/CS6859

Congratulations

on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 5 of this manual.

This manual has instructions on how to set up and register your new handset.
For abridged instructions on using the handset, see the Abridged user’s manual
that came with your telephone base.

You may also view or download the online Complete user’s manual
for a full set of installation and operation instructions at
www.vtechphones.com. In Canada, visit www.vtechcanada.com.

Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing
aids and cochlear implants. The TIA-1083 Compliant Logo is
a trademark of the Telecommunications Industry Association.
Used under license.

The ENERGY STAR® program (www.energystar.gov)
recognizes and encourages the use of products that save
energy and help protect our environment. We are proud to mark
this product with the ENERGY STAR® label indicating it meets
the latest energy efficiency guidelines.

Register online to get an additional 3-month warranty!
Visit www.vtechphones.com.

Registration

Register your product online for enhanced warranty support.

Product news

Learn about the latest VTech products.

BC

1

Parts checklist

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :

(2.4V Ni-MH)

WARNING / AVERTISSEMENT :

DO NOT BURN OR PUNCTURE BATTERIES.

NE PAS INCINÉRER OU PERCER LES PILES.

Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Your telephone package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.

User’s manual

Handset User’s manual

charger adapter

Battery compartment
cover

BatteryCharger and

ECO mode

This power conserving technology reduces power
consumption for optimal battery performance.

HANDSET 1

The ECO mode activates automatically whenever the
handset is synchronized with the telephone base.

The handset shows ECO when the ECO mode activates.

ECO

10:15P M

12/18

ECO

Battery installation

Install the battery as shown below.

Plug the battery connector securely

1. Place the battery with the label
into the socket.

2.

THIS SIDE UP facing up and
the wires inside the battery
compartment.

Slide the battery compartment cover

3. Place the handset in the telephone
towards the center of the handset until

4.
base or charger to charge.

it clicks into place.

CHARGE light
remains on when
charging.

If the handset will not be used for a long time, disconnect and remove the battery

•
to prevent possible leakage.

To purchase a replacement battery, visit our website at www.vtechphones.com or

•
call 1 [phone]. In Canada, go to www.vtechcanada.com or
dial 1 [phone].

2

Battery charging

Once you have installed the battery, the screen indicates the battery status
(see the table below). For best performance, keep the handset in the telephone
base or charger when not in use. The battery is fully charged after 11 hours of
continuous charging.

Battery indicators Battery status Action

The screen is blank, or
displays Put in charger
and flashes.

The screen displays
Low battery and flashes.

The screen displays
HANDSET X.

If you place the handset in the telephone base or charger without plugging in the
battery, the screen displays No battery.

When it is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Seven hours
While in speakerphone mode

(talking*)
While not in use (standby**) Five days

* Operating times vary depending on your actual
use and the age of the battery.

** Handset is not charging or in use.

The battery has no or very little
charge. The handset cannot
be used.

The battery has enough charge
to be used for a short time.

The battery is charged. To keep the battery

Charge without interruption
(at least 30 minutes).

Charge without interruption
(about 30 minutes).

charged, place it in the
telephone base or charger
when not in use.

Three hours

Add and register a handset

You can add new handsets (CS6709/CS6709-15/CS6709-16, purchased
to your telephone system. Each handset must be registered with the telephone base
before use. When first purchased, each expansion handset displays
To register HS... and ...see manual alternately. You may need to charge the
handset before registering it to the telephone base.

To register a handset to a CS6719/CS6729/CS6758/CS6759/
CS6829/CS6859 base:

Place the new (non-registered) handset in the telephone base.

1.

CS6729 base CS6829 baseCS6719 base

separately)

CS6758/CS6759 base

CS6859 base

Do not place
the handset in
the charger.

After about 10 seconds, the handset displays Registering... When the

2.

registration process completes, the handset displays Registered and you hear
a beep. The registration process takes about 90 seconds to complete.

3