Vieta HMD400 User Manual

Important safety instructions – please read carefully

and keep for future reference

CAUTION ! Dangerous tension inside the product ! Do not open. Risk of electric shock ! No parts can be repaired by the enduser. Only qualified personnel can repair and maintain this product.

If the electric cord is damaged, it must be replaced by the manufacturer or qualified after-sales personnel in order to avoid any danger.

The product must be installed in accordance with local laws. Damaged batteries must be properly disposed. In order to protect the environment, please dispose the batteries properly,

in accordance with local laws (information is available at your reseller).

Where to install the product

Proper ventilation

Do not expose the product to high temperatures, moisture, water and dust.

- Place the product on a straight, rigid and stable place. Do not place the product on a carpet.

- Do not place the product on top of another that may cause overheating (for example, a receiver or amplifier).

- Do not place anything underneath the product (for example, CDs or magazines).

- Place the product in a sufficiently–aerated place to avoid overheating. Allow at least 10cm spacing at the back and top of the product, and 5cm spacing on both sides to prevent overheating.

- Do not place items such as newspapers, tablecloth, curtains, in front of the ventilating openings.

- The apparatus shall not be exposed to dripping or splashing. No object filled with liquids, such as vases, shall be placed on the apparatus.

- Do not place other items close to this product that may damage it (for example, objects containing water or lightened candles).

- No naked flame sources, such as lighted candles, should be placed on the apparatus.

Electric supply

- Please unplug the product in case of prolonged non-use.

- If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales personnel to avoid any danger.

- This product must be connected to an electrical supply 230V ~ 50Hz.

‐ The plug must be accessible after installation.

To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture. To prevent the risk of electric shock, do not remove the cover or back of this product. In case of product failure, only qualified personnel can repair. There are no user-serviceable parts inside.

Use of controls, adjustments, or performance of procedures other than those specified herein may result in dangerous radiation exposure. This product is rated as LASER CLASS 1 PRODUCT. CAUTION: Laser radiation when open - never stare into the laser beam.

DVD Compatibility

This product can only play ZONE 2 DVD.

This product is compliant with directives 2006/95/CE (abrogating the directive 73/23/CEE modified by the directive 93/68/CEE) and 2004/108/CE (abrogating the directive 89/336CEE).

- This logo set on the product means that the recycling of this apparatus comes within the framework of the directive 2002/96/EC of January 27, 2003 concerning the waste on electrical and electronic equipment (WEEE).

- The presence of dangerous substances in the electrical and electronic equipments can have potential consequences on the environment and human health in the cycle of reprocessing this product.

- Therefore, at the end of its lifetime, this product shall not be disposed with other non-recycled waste.

- As the end user, your role is of prime importance in the cycles of re-using, recycling, and other forms of valorization of this electrical and electronic equipment. Local authorities and resellers have set special procedures for the purpose of collecting and recycling this product.

- You have the obligation to use the selective waste collection systems put in place by your local authorities.

INTRODUCTION

Thank you for selecting VIETA as your lifestyle companion. To bring the functionalities of your device to an excellent condition,we suggest you to spend some time to read this manual before operating your device.The information contained in this manual will enhance your total experience in operating your device. Keep this manual in a safe place after reading for your future reference.

FUNCTION

BUILT-IN 2.0CH Hi-Fi AMPLIFIER DVD MINI COMPONENT SYST EM COMPATIBLE WITH DVD/VCD/DVCD/CD/HDCD/MP3/M P4 HIGH QUALITY DIGITAL OPTICAL AND COAXIAL AUDIO OUTPUT COMPONENT VIDEO OUTPUTS TO PRODUCE CLEAR PICTURE MULTI-LANGUAGE,MULTI-ANGLE AND MULTI-SELECTION OF SUBTITLE DIGITAL VOLUME CONTROL,ALT AND UNDERTONE SEPARAT ELY ADJUSTABLE FULL FUNCTION FOR INFRARED REMOTE CONTROL BUILD-IN 2.0 CHANNEL POWER AMPLIFIER OUTPUT: 2 X 15W RMS MATCHED TWO WOODEN HI-FI BOOK-SHELF SPEAKERS PLL FM TUNER WITH AUTO-RESEARCH FUNCTION USB READER FUNCTION

IT CAN CONVERTS CD SIGNALS INTO MP3/MP4 SIGNALS IN YOUR USB MOMERY STICK

CONTENT

IMPORTANT SAFETY INSTRUCTION............................................................................................................1

INTRODUCTION...............................................................................................................................................3

CONTENT.........................................................................................................................................................4

LIST OF MAIN PARTS......................................................................................................................................4

FUNCTIONAL DESCRIPTION OF PANEL.................................................................................................... .5

FUNCTIONAL DESCRIPTION OF REMOTE CONTROL.................................................................................6

CONNECTION OF DVD AND TV ....................................................................................................................7

SETTING OF DIGITAL AUDIO OUTPUT..... ....................................................................................................8

SYSTEM CONNECTION..................................................................................................................................9

BASIC OPERATIONAL INSTRUCTION....................................................................................................10-15

DVD MENU SETUP..................................................................................................................................16-18

SPECIFICATION............................................................................................................................................19

TROUBLESHOOTING...................................................................................................................................19

LIST OF MAIN PARTS

Master Unit 1Piece 2 Speakers Remote Control 1Piece FM Antenna 1Piece AV Wire 1Piece Manual 1Piece

PANEL FUNCTION

1.STANDBY Press to standby mode

2.DISPLAY Show the dvd function

3.REMOTE SENSOR Receive the signal from remote control

4.SOURCE Coose the input source

5. .PLAY/PAUSE Sart or pause disc/mp3 play

6.PREV Sip to previous song or station

7.NEXT Sip to next song or station

8.OPEN/CLOSE Open and close the disc door

9.VOLUME Ajusts volume level

10.DISC DOOR Pt in or take off the disc

11.STEREO HEADPHONE JACK .5mm headphone jack

12.USB INTERFACE USB input host

REAR PANEL ILLUSTRATION

1.R/L AUDIO OUTPUT

2.Pb/Y/Pr OUTPUT

3.COAXIAL OUTPUT

4.VIDEO OUTPUT

5.S-VIDEO OUTPUT

6.OPTICAL OUTPUT

7.2CH AMPLIFIER OUTPUT.

8.AUX IN INPUT

9..FM ANTENNA

10.AC230V INPUT

FUNCTIONFUNCTIONAL DESCRIPTION OF REMOTE CONTROL

Range of operation of the remote control

The remote control can be used up to approximately 16 feet/5 meters in straight line. It can also be operated at a horizontal angle up to 30

from the remote control sensor.

Follow this precautions to avoid leaking or cracking cells:

1.Place the batteries in the remote control so they match the polarity:(+)to(+)and(-)to(-).

2.Use the correct type of batteries. Batteries that look similar may differ in voltage.

3.Always replace both batteries at same time.

4.Do not expose batteries to heat or flame.

+ 16 hidden pages